第五章介绍了系统硬件接口设计。
The fifth describe in detail the design of hardware interface.
第三部分为硬件接口设计与编程；
The third part introduces the design of hard interface circuit and program.
在硬件设计过程中，完成了CH375和DSP、CPLD的硬件接口设计。
In the hardware design process, it achieves CH375 with DSP, CPLD hardware interface design.
开发工作主要包括了：通信节点设计、硬件接口设计以及软件程序的编写三个方面。
The main work includes the design of the node, the design of the hardware interface and software programming.
系统采用DSP和FPGA协同控制的模式，实现了同液晶显示模块及键盘的软、硬件接口设计。
Based on the mode of DSP cooperating with FPGA, the interfaces of hardware and software are realized for LCD module and keyboard.
介绍一种高保真的音频信号处理系统，给出了前端音频信号调理电路设计，实现了DSP芯片TMS320VC5410与语音转换芯片TLC320AD50C的硬件接口设计，并通过FIR算法实现了对音频信号的处理。
The design gives the signal conditioning circuit, accomplishes the hardware interface design of DSP chip TMS320VC5410 and chip -to-speech TLC320AD50C, and processes audio signal by FIR arithmetic.
糟糕的接口设计、硬件限制和跨系统集成也会降低系统的整体性能。
Bad interface design, hardware limitations, and cross-system interaction can also degrade performance of the whole system.
制造商不愿意把所有这些接口都放到智能手机上，因为有些设计是必须保证的，诸如保持硬件耐用性和尽可能小的封装。
Manufacturers are hesitant to incorporate all of these interfaces on a smartphone because of design obligations such as maintaining hardware durability and a small footprint.
本文还设计具体的硬件接口电路，说明其工作原理，给出应用于染色机喷头控制系统的程序流程。
The paper also design some specific hardware interface circuit to explain its word principle. And also explained program chart of dyeing machine blow head in the application.
文中介绍了基于USB接口的温度检测系统的工作原理，详细叙述了该系统的硬件结构和软件设计。
The paper introduced the operating principle of the temperature measurement system based on USB interface, and described the hardware structures and software design of this system in detail.
设计了系统的总体结构及组成模块，进行了硬件原理、GPRS模块接口和软件的开发。
The main structure and components were designed, and the hardware principle, GPRS module interface and software were developed.
本文提出了一种应用微机对显示器件的动态光谱进行分析的方法，着重于微机接口的硬件设计。
In the paper, an analytic method is described in which a microcomputer is used to analyze dynamic spectrum of display device, and a hardware design of microcomputer interface is discussed specially.
提出了计数接口电路的硬件和软件设计方法，并进行了电路调试。
The hardware and software design methods of the counter interface circuit were put forward. And the circuit debugging has been carried on.
介绍了以DSP为核心具有以太网接口的嵌入式系统的硬件电路组成和软件设计方法。
This paper introduces a method of hardware constitution and software design of embedded system containing Ethernet interface and adopting DSP as its core processor.
深入探讨了DSP技术和计算机的总线接口技术，设计了PC及DSP的硬件电路接口。
Deep research into DSP technology and computer bus technology, design the hardware and circuit interface of PC and DSP.
最后，主要介绍了液晶显示器在单片机控制系统中与80c 196kc的结合使用，其中包括硬件接口以及软件设计。
At last the mainly introduction is the using of LCD in combination with 80c196kc in single chip control system, including hardware interface and software design.
介绍一种机械手关节运动的PC机控制方法，它包括步进电机的驱动、硬件接口电路的设计、软件的编程方法。
This paper introduces PC control approach of joint motion of manipulator. This approach includes driving of stepping motor, interface design of hardware circuit and software programming.
给出了硬件接口电路的设计与实现方法，并且提供了主要程序源代码。
The design of the hardware interface circuitry and source codes of main programs are also presented.
本文研究传感器网络化中的关键技术，包括智能传感器网络接口的软硬件的设计与实现。
In this paper, the key technologies of smart networked sensors are studied, especially the design and implementation of the software and hardware of their smart networked interfaces.
最后，主要介绍了液晶显示器在单片机控制系统中与80c 196kc的结合使用，其中包括硬件接口以及软件设计。
At last the main introduction is the using of LCD in combination with 80c196kc in single chip computer control system, including hardware interface and software design.
在其硬件设计中，着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。
In the section of hardware design, selection of the CAN bus communication interface card, design of CAN nodes and the signal acquisition system are introduced.
本文主要介绍了这一系统的体系结构、硬件组成、接口设计。
The system's structure, hardware composition and interface design are introduced mainly in this paper.
论述该称重系统的系统设计，硬件构成、双cpu并行接口的设计方法和系统特点。
System design, hardware composition, dual CPU parallel interface designing method and system characteristics are discussed in this article.
详细地介绍了本研究所完成的网络接口卡的硬件设计思想及低层协议支持软件的设计。
The design of the network interface card completed in our research is presented in detail on hardware and the software supporting lower levels of the protocol.
介绍了硬件和接口电路及软件设计。
The hardware and interface circuits and software design are described.
实际应用证明CAN接口的软硬件设计能够满足汽车应用的需要。
The actual use proves that the software and hardware design of the CAN interface can meet the demands of automobile application.
文章给出了EIB通用接口硬件、软件设计过程。
The hardware and software designing process of EIB universal interface is described.
AD转换电路和LCD接口的硬件设计。
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
应用推荐