这个阶段常用的具体方法包括：市场研究，用户研究，管理与规划和设计研究小组。
Specific methods include: Market research, User research, Managing and planning and Design research groups.
在第五个研究报告中，研究者给269名大学生阅读了一个智能设计方法和一篇CarlSagan写的自然主义文章，然后问了相似的几个问题。
In a fifth study, researchers asked 269 college students similar questions after being presented with an intelligent design approach and a naturalist passage authored by Carl Sagan.
论文对扩频通信系统和FPGA设计方法进行了相关研究，尤其是对FPGA设计中的一些非常重要的严格同步问题进行了研究。
The design technique of FPGA related to ss communication system has been discussed in this thesis. Especially, the strict synchronous which is important in FPGA design has been discussed.
通过对以上国际合作项目的设计、数据收集、方法学和发现的回顾和整理研究，发现仅有很少的项目和研究纳入了社会性别的观点。
By examining research design, data collection, methodology and findings of, those studies, the author finds that few studies have taken gender issues into consideration.
研究了设计特征、工艺特征和成本特征之间的相互关系，按照并行工程思想，提出了与设计进程并行的基于特征映射的成本估算模型，研究了模型的实现方法。
The relations between design feature, machining feature and cost feature are studied. Cost estimating model based on feature mapping and its application method are presented in concurrent engineering.
研究固液两相流体在离心泵内的运动规律，完善其设计理论和设计方法，一直是各国工业部门和大学，科研机构的教授、研究人员十分重视的课题。
The perfection of designing theory and method has been an important project of professors, researchers in industrial departments, universities and institutes in every country.
研究人员在对型线类型设计和优化的研究中，缺乏简洁有效的模式，往往简化为单目标优化问题，而且采用传统的方法与手段。
Many researchers usually simplify it as a single optimization problem using traditional methods for lack of the concise and effective mode.
研究结果表明研究方法和公式的正确性，为地下卷取机设计提供了理论依据。
The conclusions show that research methods and formulae are correct, and afford theory basis for designing down-coiler.
研究设计和方法：采用VHA糖尿病流行病学队列进行一项回顾性队列研究。
Research Design and Methods:A retrospective cohort study using data obtained from the VHA Diabetes Epidemiology Cohort was employed.
研究设计和方法：对在案的糖耐量正常的冠心病患者进行前瞻性，随机，双盲的研究。
Research Design and Methodsrospective, randomized, double-blind study on patients with documented stable coronary artery disease and normal glucose tolerance.
信息网络设计和信息网络性能评价是网络研究的重要领域，而网络仿真技术是开展网络研究的重要方法。
Information network Design and network Performance Evaluation are critical network research areas, while network simulation is an important method to carry out these research activities.
研究目的从实际工作出发，研究《安徽省耕地占补平衡信息管理系统》设计与开发的步骤和方法。
Based on practical work, the paper tries to summarize methodologies and procedures applied in designing and developing cultivated land balance system for Anhui province.
比较了蛋白质耐热工程重点研究的合理化设计、定向改造和一致序列法等方法，并提出了将来的研究趋势。
In this article, the research topics of engineering proteins for thermostability, including rational design, directed evolution and consensus sequence method, are compared with each other.
本文以车载飞轮电池为研究对象，对其磁力轴承的结构设计方法和理论进行了研究。
This dissertation studies the design method and theory of magnetic bearing's structure based on the object of the flywheel battery for vehicle.
采用调查研究、理论分析和实践反馈相结合的研究方法，分析高校毕业设计答辩存在的问题和面临的挑战。
By employing research approach of investigation, theoretical analysis and practice feedback, the existing problem and facing challenge of university final project defense are analyzed.
本文提供了作者在单轴载荷下的无限寿命疲劳设计方法和设计数据研究方面的试验研究结果。
This paper provided the experimental research results of fatigue design methods and design data of infinite life under uniaxial load.
设计模式重用方法的研究是一项十分重要的基础性和创新性的研究。
The study of design pattern reuse method is a very important fundamental and innovative study.
我的直觉是我们将会看到逐渐提高对从业者的研究、设计和实现三个方面能力的要求，但会减少对用户研究和以用户为中心的设计的方法的专门训练。
My intuition is that we will see an increase in demand for practitioners capable of research, design and implementation, but with less specialized training in user research and user centered design.
应用蒙特卡罗方法对中国先进研究堆（CARR）上的两条冷中子导管CNG1和CNG2的设计方案进行了模拟研究。
The designs of the two cold neutron guides, CNG1 adn CNG2, to be built in China advanced research reactor (CARR) are studied with MonteCarlo simulation technique.
本文主要研究了现有的一些容差分析和设计的方法，同时也对参数的中心设计进行了较为细致的研究。
The works in this dissertation focused on the study on the existed methods of tolerance analysis and design. Moreover, design centering also was a part content of the dissertation.
研究采用锚测验非等组设计，对IRT真分数等值和IRT观察分数等值两种方法进行了比较研究。
IRT true score equating and IRT observed score equating in common-item non-equivalent group design based on the item response theory were compared.
在这一章中的定性方法易学定性梅托德什帕易学研究范式，研究设计和抽样策略进行了讨论。
The qualitative Method ology in this Chapter the qualitative metod ology research paradigm, research design and sampling strategy is discussed.
本研究方向主要涉及工业和工程环境以及数字化交互空间设计，研究内容为环境设计理论与方法、环境与工效分析。
This research area concerns the design of industrial and digital interactive environments, and focuses on theories and methods of environment design and ergonomics.
本文是针对“建筑空间应变设计”的理论和方法而研究完成的设计研究型论文。
This thesis is an approach to the practice of responding building, which based on the theory of the responding design of architecture space.
在高低周复合疲劳研究中采用了正交试验设计的方法，并以此为基础综合研究了低周应力、高低周应力比、高周循环次数和高周循环频率对复合疲劳寿命的影响及其机理。
Based on the orthogonal test design, this paper studied the effect of low cycle stress, high-low cycle stress ratio , high cycle number and high cycle frequency on complex fatigue life.
研究设计和方法-我们评估了818名参加弗明汉研究的老人(平均年龄79岁，女性占62%)，他们常规测量血浆来普汀含量。
RESEARCH DESIGN AND METHODS - We evaluated 818 elderly (mean age 79 years, 62% women) Framingham Study participants attending a routine examination at which plasma leptin was assayed.
另外通过与常规预应力结构的比较，研究了二次预应力组合结构正截面承载能力和结构变形的计算方法，为今后的设计和研究提供了参考。
After that, the calculation method about double pre-stressed composite structure's bearing capability and deflection are investigated, which provide the consults to future research and design works.
主要针对装置中实验研究所需的特殊工作电极——开槽CBN砂轮，论述其在新方法中在线修整的原理及其优越性，并进行了研究设计和分析选择。
We also study the slot CBN emery wheel, which is a special work electrode required by the technique, and explains its principle for in-process dressing.
理论方面主要采取历史研究法、文献研究法、系统分析研究法，实践方面主要采用了实地调研和实际工程项目设计的研究方法。
The thesis focuses on the universality of the new teaching buildings of University, and studies on several aspects with practice and research integrating methods.
理论方面主要采取历史研究法、文献研究法、系统分析研究法，实践方面主要采用了实地调研和实际工程项目设计的研究方法。
The thesis focuses on the universality of the new teaching buildings of University, and studies on several aspects with practice and research integrating methods.
应用推荐