同时使用过流和短路保护电路，提高电路可靠性。
At the same time, the over current and short were adopted to protect circuits and improve circuit reliability.
主要介绍了用于弧焊逆变器中的电子电抗器和短路保护电路，并对其工作原理进行了分析。
The electronic reactor and the short-circuit protecting circuit used in arc welding inverterare introduced, and their working principles are analyzed.
主要介绍了用于弧焊逆变器中的电子电抗器和短路保护电路，并对其工作原理进行了分析。
The electronic reactor and the short-circuit protecting circuit used in arc welding invertebrate introduced, and their working principles are analyzed.
为了使系统更稳定可靠，提升了系统的防雷能力和防静电能力，并为传感器电源设计了传感器电源短路保护电路。
In order to strengthen the stability and reliability of the system, lightningproof and static-free protection is improved and power trip protection circuits are added to to the design of senor power.
灯具内部电路设计具有防止过充、过放、短路保护装置及开关防误操作功能。
The internal circuit, the lamp is designed to prevent overcharge, over discharge, short circuit protection device and the switch function of anti misoperation.
试验结果证明，本驱动电路能够很好的实现正常驱动、动态关断以及短路保护等功能。
Experimental results prove that the designed driver can realize drive, dynamic turn-off and short-circuit protection and so on.
双重保护：灯具内部电路设计具有防止充电，短路保护装置功能。
Double protect: it has design to avoid charge's electric circuit and short circuit protection function in the lamps and lanterns.
采用最严格的充电管理电路，具有过载，欠压，短路等多重保护，标准usb电源接口输出。
Adopt strict charge to manage the circuit, it can protect with overload, undervoltage, short circuit, etc. output for standard USB power supply interface.
该系列电源适配器，采用固定频率控制电路，具备限流、限压、过温、短路全功能保护。
With fixed frequency control circuit, it provides with over voltage, over current, overheat and short circuit protection.
常用电路保护器件的主要失效模式为短路，瞬变电压抑制器（TVS）亦不例外。
The primary failure mode of commomly used circuit protective devices is short-circuit, and so is TVS (Transient Voltage Suppressor) .
输出具有自恢复式短路保护功能，当短路解除后电路能恢复正常工作。
The output has from restores the type short circuit protection function, after short-circuits relieves the electric circuit to be able the rehabilitation.
当被测dut发生短路或其他异常导致电流或电压过高时，钳位电路会将输出电压或电流限制在一个固定值上，以保护器件不被损坏。
Meanwhile, the clamp circuit will limit the output voltage or current at a fixed value when they are abnormal that caused by a DUT short circuit or other fault in order to protect the device.
本文采用UC 3846作为PWM发生器，桥式驱动的脉冲变压器既保证信号的传输，又保证足够功率驱动全桥逆变主电路。对于经常发生短路刷镀刷镀工艺，快速过电流保护非常必要。
UC3846 is used for PWM, pulse transformer driven by bridge can transfer signal and power for IGBT in main circuit, quick protection is necessary for short circuit often happen during brush plate.
该电路不但降低了功率损耗，还具有短路保护和互锁保护等电路保护功能。
The circuit has many functions of protection, such as short circuit protection and interlocked protection.
为了限制逆变器桥臂直通短路时故障电流的上升率，可以在装置的直流侧安装一种称为“环流保护电路”的附加电路。
In order to restrict the rising rate of fault current caused by short circuit on one arm of bridge of inverter, a kind of device named current loop protection circuit can be adopted.
以短路过程分析为基础，阐述了应用短路分流法保护时电路有关参数的选择原则；
Based on the analysis of short circuit process, the principle to select relevant parameters when applying short circuit shunting protection is introduced.
该电路具有过热保护、短路保护功能和电流、电压闭环控制回路功能。
The circuit has the function of thermal shutdown, current limiting and closed control loop of current and voltage.
介绍了低压整流柜输出端短路保护的方法，并详细分析了保护电路的工作原理。
This paper introduces a short circuit protective method of the output terminal of the low voltage rectifying cabinet. Analyzes in detail the operational principle of the protective circuit then.
本文提出了GTR短路时的数学模型，并应用这一模型对GTR自保护驱动电路保护死区短路功耗进行了计算。
The mathematical model which is used to calculate the dead zone power consumption when GTR is on short circuit is provided.
芯片内设的短路保护、开路保护、雷击保护、过温保护等电路可保证收发器在恶劣的应用环境下正常工作。
The chip has internal short circuit protection, open circuit protection, lightning strike protection and thermal shutdown protection circuits.
实验表明，在无任何附加保护措施的情况下，该电路能成功地对GTR进行短路保护。
The experiment shows that it can protect GTR successfully when in short circuit any additional protection.
电路有过充、过放。 充电回路短路、电路熔断器保护。
The electric circuit has the charging and discharging protection.
内部电路保护包括短至地面，负载短路，滞后热关机，和交叉电流保护。
Internal circuit protection includes short-to-ground, shorted load, thermal shutdown with hysteresis, and crossover current protection.
我们提供的型号款式新颖，具备输出短路保护功能，外型小巧，通用的工作电压(范围为90v至300v)，实施快速充电，并具备可靠的电路。
Our models are in attractive designs with output short circuit protection, compact size, universal operating voltage from 90v to 300v, rapid charging, with reliable circuitry.
电路设置有短路、过电压等保护措施；
The circuit has short circuit and over voltage safety protections.
综合保护电路系统包括过压和短路保护，过压和短路保护是原有的设计。
Comprehensive protection circuitry, including overvoltage and short circuit protection, is inherent in the design.
本系列配电箱可作为动力照明、电动机控制，对电路进行过载、漏电及短路保护之用。
This series of distribution box can be used as lighting power and electric motor controlling to avoid the overloading, electricity leaking, short-circuit of circuit system.
电路的过压、过流、短路、开路的保护设计大大提高了产品的安全性。
The design of protects for over voltage, over currency, short circuit and open circuit, substantially improves its safety.
电路的过压、过流、短路、开路的保护设计大大提高了产品的安全性。
The design of protects for over voltage, over currency, short circuit and open circuit, substantially improves its safety.
应用推荐