该仪表适用于测量真空压力。
应用：适用于一般设备的真空压力测定。
Application: measuring the vacuum pressure of ordinary equipment.
目的：监测脉动真空压力蒸气灭菌器灭菌效果。
Objective to monitor the sterilizing effect of pulsing vacuum pressure steam sterilizer.
本文介绍了真空压力浸渍的基本原理及其特点。
This paper introduces the fundamental and characteristics of the Vacuum Pressure Impregnation (VPI).
真空压力浸渍是电工行业中目前应用的新技术、新工艺。
At present, the vacuum pressure impregnation technology is a new process in electrical trade.
目的：探讨预真空压力蒸气灭菌器对凡士林纱布的灭菌效果。
Objectives: To investigate the sterilizing effect of gravity and vacuum sterilizer on vaseline gauze.
目的探讨B级脉动真空压力蒸汽台式灭菌器对牙科手机的灭菌效果。
Objective Discuss sterilization effect of B-class pulsation table top vacuum pressure steam sterilizer for dental handpiece.
一种强制风冷旋片滚柱泵，用于制造真空泵及真空压力复合气泵。
The forced wind cooled rotating sheet roller pump is used as vacuum pump or vacuum-pressure composite air pump.
为了达到这一目的，标本将被浸泡进真空压力室里的聚合体溶液中。
To achieve this, the specimen is immersed in a polymer solution and placed in a vacuum chamber.
真空夹持模块中，设计了真空回路，通过数据采集卡实时监测真空压力。
In the vacuum holding module of wafer, the vacuum monitoring circuit is designed in order to collect and monitor the vacuum pressure in real-time.
大型低温超导磁体线圈制造的最后关键的工艺是真空压力浸渍（VPI）。
The final major step in fabrication of large superconducting magnet coils is vacuum pressure impregnation (VPI).
分析了真空压力、射频功率、气体组合及其流量和电极温度对刻蚀速率、刻蚀剖面的影响；
The dependence of etching rate and profile on the vacuum pressure, RF pow-er, gas composition and flow rate, and electrode temperature is analyzed.
镇江气泵zybw _ F型干式旋片真空压力复合气泵是ZYBW_E型气泵派生产品。
ZYBW_F type dry running vacuum pressure combined pump is the derivative product of ZYBW_E type pump.
通过脉动预真空压力蒸汽灭菌器B-D试验监测，分析并找出影响B-D试验结果的不合格因素。
This paper analyzes the disqualification factors influencing B-D test results by using B-D test monitoring.
在马赫8炮风洞中开展了不同初始真空压力条件下风洞喷管启动过程对侧压进气道启动的影响研究。
Effect on inlet starting of nozzle starting process was studied in a 500 mm Mach 8 gun tunnel.
本文介绍了新型真空压力复合气泵的工作原理，应用及其性能，并分析了它的结构及参数对其性能的影响。
This paper introduces the operational principle, application and performance of vacuum pressure compound air pumps, and analyzes the influence of its construction and parameters on its performance.
本文阐述了浸渗技术的浸渗方法、常用的浸渗剂和浸渗工艺，介绍了真空压力浸渗装置的组成和主要结构。
The method of impregnation and penetrating agents and the penetrating process were described in the paper. The composite structure of device that vacuum pressure penetrating were also introduced.
按照工艺要求，设计了真空压力浸渍蒸煮新型设备，着重介绍了该设备的结构组成、工作原理和主要特征部件。
On the other hand, the VPI cooking device was designed, and its construction, working principle and special components were introduced.
为评价新型预真空压力蒸汽灭菌器的临床灭菌效果，以化学监测和生物监测的方法，对其实际灭菌效果进行了观察。
Objective To explore problems of chemical indicative CARDS and adhesive tapes in the disinfection, and find out some measures for improving the sterilizing effect of the pressure steam sterilizer.
公司生产的1.5兆瓦直驱式永磁同步发电机定子，采用少胶真空压力浸漆（VPI）工艺，电气强度和机械强度高。
The stator of 1.5MW gearless PM synchronous generator, by using resin VPI technology, has got better electric and mechanical capabilities.
通过设计不同的辅助真空压力树脂注入工艺 ，发现在RTM制造过程中 ，有效地利用真空技术 ，可使产品的断裂强力分别由1 。
Through the design of the different resin injection technology the author discovers that the usage of assisted vacuum degree during RTM injection process can increase fracture strength from 1.
“我告诉他许多年以前，这么做非常危险，”基廷格说，“你处于真空的环境中，你的全部生命都仰仗压力服的表现。”
"I told him many years ago, it's very hostile," Kittinger said. "you're in a vacuum, and your whole life is dependent on the pressure suit working properly."
当气体在周围迅速扩张的时候，中间区域就会出现暂时的真空，而这造成了高压力的内爆。
As the gas expands rapidly in the surrounding area, it creates a temporary vacuum in the middle which determines a high-pressure implosion.
石油的压力会迫使它上升到真空阀的中心处。
The oil pressure will force it up into the heart of the stack of valves.
而最初用火箭来发射却干扰了回旋装置，而且无线电导航也缺乏其可靠性，原因是真空管在高度加速的情况下承受不了压力。
The initial launch using rockets upset the gyroscopes, and radio guidance was unreliable because vacuum tubes suffered under high acceleration.
罐子配备有各种控制产品灌装、压力积累、减压、产品取出和罐子真空的回路。
Tanks are equipped with various circuits to control product fill, pressure build-up, pressure-relief, product withdrawal, and tank vacuum.
轮框是在一个有125度高温和6个气压压力下在真空焗炉铸造的。
The wheels are cured in an Autoclave at 125 degrees C and 6 bar of pressure.
本文在稳态模型和局域热力学平衡等假设下，推导了在纵向磁场下真空电弧压力的数学表达式。
This paper derives the mathematical express on of the pressure of vacuum arc subjected to an axial magnetic field under stationary model and the assumption of local thermodynamic equilibrium etc.
本文在稳态模型和局域热力学平衡等假设下，推导了在纵向磁场下真空电弧压力的数学表达式。
This paper derives the mathematical express on of the pressure of vacuum arc subjected to an axial magnetic field under stationary model and the assumption of local thermodynamic equilibrium etc.
应用推荐