使用该仪器后，可测出球面直径尺寸的真实值。
After using this instrument, the true value of the spherical diameter size could be measured.
扁圆头半空心铆钉。铆钉直径尺寸2到5毫米。
光纤的直径尺寸决定了信号的强度和光度计的信噪比。
The diameter size of the fiber determines the signal strength and photometric signal-to-noise.
插针的直径尺寸符合要求与否直接影响着电连接器接触点的稳定性。
The contact diameter size directly influences the electric reliability of the electronic system.
特殊设计可以拥有稳定的直径尺寸和圆整度，可以适合生产厚壁管的需要。
And the design can ensure the stability of diameter and roundness when producing the pipe with thick wall.
如果密炼机的轴滑动面磨损，可用金属喷镀方法修补，然后再磨光至原直径尺寸。
If the axis sliding surface wears, available metal spraying method patching, then regrinds the light to the original diameter size.
通过对退锚器工作压力的确定、强度校核、合理计算，选择了活塞承压面积及各液压缸直径尺寸。
Through anchors identified by the work pressure, intensity degree, reasonable terms, choiced piston confined area and the size of hydraulic tank diameter.
特殊设计的真空定径箱，可以确保稳定的直径尺寸和圆整度，使用速度控制系统，使牵引速度稳定。
Special design vacuum sizing tank can ensure the stability of size and roundness, Speed controllers are used in extruder, haul-off to offer stability and precision.
通过改变套管的尺寸，特别是改变套管的厚度，壳体的尺寸被设计成安装一种以上的电子组件直径尺寸。
The housing can be dimensioned to mount more than one electrical component diameter size by varying the dimensions of the sleeve, and in particular the thickness of sleeve.
该系统具有检测速度快、精度高、非接触检测、闭环控制等特点，完全适用于回转体直径尺寸的在线检测和控制。
The system had many features such as high speed, high accuracy, untouched measuring and closed-loop control. The system is used on-line measuring and control of diameter measure.
介绍了带凸缘拉伸件可调式落料拉伸复合模设计，实现对凸缘直径尺寸可以进行调整以实现一定公差要求的模具结构。
Introduced design of the adjustable blanking-drawing compound for the drawing with flange, the drawing die could adjust the flange size, and satisfied the part tolerance requirement.
针对表面粗糙度和形位误差对圆柱体直径评定结果的影响，在进行圆柱体直径尺寸评定时，需要对表面粗糙度进行滤波处理。
As roughness and form & position errors have an effect on evaluation result of cylinder diameters, it is necessary that roughness is filtered for evaluating cylinder diameters size.
这也使得设计师可以进一步延续减少方向盘尺寸的趋势，目前标准的赛车方向盘直径只有普通道路车辆方向盘的一半大小。
This has enabled designers to continue with the trend of reducing the steering wheel size, with the typical item now being about half the diameter of that of a normal road car.
与真正行星相仿，灶神星的尺寸（直径大约为520公里）和密度使其具备足够的引力保持基本的球体形状。
Vesta’s size (it is around 520km in diameter) and density make it massive enough for its gravity to keep it roughly spherical, like a proper planet.
有人见过直径500英尺的冰环，也可以看见不同尺寸的冰环同时出现的景象。
These ice circles have been seen with diameters of over 500 feet and can also at times be found in clusters and groups at different sizes.
这些硅片的尺寸较大，足够用来增加每片电池的直径，由此减少了每套组件里的电池数量。
The wafers he bought were also larger in size, which made it possible to increase the diameter of the individual cells, which in turn reduced the number of cells needed to make a module.
UFO的尺寸是高6英尺，直径15英尺。
The dimension of the UFO was 6 feet high, 15 feet in diameter.
恒星的尺寸范围从仅有12英里宽(20公里)的中子星到大约1000倍太阳直径的超大恒星。
Stars range in size from neutron stars, which can be only 12 miles (20 kilometers) wide, to supergiants roughly 1,000 times the diameter of the sun.
恒星的尺寸范围从仅有12英里宽(20公里)的中子星到大约1000倍太阳直径的超大恒星。
Stars range in size from neutron stars, which can be only 12 miles (20 kilometers) wide, to supergiants roughly 1, 000 times the diameter of the sun.
木星4直径约为3 000英里(约相当于水星的尺寸)。
Callisto is about 3,000 miles in diameter (about the size of Mercury).
Skylifter的工程师正在研究一个直径23米的代号为Nikki的无人驾驶版本，他们计划在未来三年建造一个全尺寸的150米直径的有人驾驶的原型--- Lucy。
Skylifter’s engineers are now working on a 23-metre unmanned version dubbed Nikki. They plan to construct a full-sized 150-metre piloted prototype, Lucy, over the next three years.
随着水热温度的升高，粒子的直径随之增大，而形貌和尺寸的均一性则有所降低。
With the increase of hydrothermal reaction temperature, the diameter of the particles accreted and size distribution forms inhomogeneous.
基于激光扫描检测原理，提出了一种用于测量较大直径的双光束激光扫描尺寸测量系统。
Based on the laser-scanned inspecting principle, a double beams laser-scanned measuring system for size is presented, which is used to measure a diameter.
发现随牵引速度的提高，PA 6微纤的平均直径变小，尺寸分布更均匀，力学性能也随之提高。
The average diameter of PA6 fibrils decreased with the increasing draw rate, and the diameter distribution of fibrils became narrow, the mechanical properties were improved.
允许的尺寸变化量是考虑到了最大和最小平均直径公差的测量平面。
The permissible diameter variation (Vdmp, VDmp) is the tolerance for the maximum and minimum mean diameters of one measuring plane.
有一个大水箱它来接近和猜想的对象是关于它的坦克零件尺寸，如果要我猜会说，它的直径约为35到40英尺。
There is a large water tank it came close to and would guess the object to be about the size of the tank part of it, and if I had to guess would say the diameter of it was about 35 to 40 feet.
挤压加工：的特点是将尺寸减缩或将直径压入模孔。
Extruding: Extruding is the process of reducing the size of some feature or diameter by forcing it through a die.
在尺寸方案，几个外径和宽度尺寸被标示为每个轴承孔直径(数字1.761.78和表1.9)。
In the dimensional plans, several outside diameters and width dimensions are assigned to each bearing bore diameter (Figures 1.761.78 and Table 1.9).
外部直径，外圈的宽度和轴座直径相同的尺寸标准的球面滚子轴承范围。
The outside diameter, outer ring width and shaft seat diameter are identical to the dimensions of the standard spherical roller bearings range.
外部直径，外圈的宽度和轴座直径相同的尺寸标准的球面滚子轴承范围。
The outside diameter, outer ring width and shaft seat diameter are identical to the dimensions of the standard spherical roller bearings range.
应用推荐