任何模型类型都可工作，只要它符合下面描述的特性。
Any model type should work, as long as it meets the properties described below.
新的重要的特性会由于项目工作的结果，定期的获取到企业模型中。
Periodically, important new features will be harvested into the enterprise models as the result of project work.
这篇文章将探讨一下称之为异步工作流的工作流特性的有趣用法，它的目的就是要简化。NET的异步编程模型。
This article will look at an interesting use of the workflow feature called asynchronous workflows, which are aimed at simplifying.net's asynchronous programming model.
双因素理论和工作特性模型都揭示了内在激励因素对员工激励的重要作用。
Two-factor theory and work characteristic model unveiled the key incentive effect of internal incentive factors on employee.
根据振动式微机械陀螺的工作原理，建立了其机械特性的等效电路模型。
An equivalent circuit model of vibratory micro - machined gyroscope's mechanical properties is derived according to its working principle.
气体通过挡风抑尘墙的流动是典型的多孔介质-纯流体耦合流动，多孔介质模型能够良好的反映其工作特性。
The wind pass the wind-proof and suppressing wall is a typical porous media-fluid coupled flow, the porous medium model can show its working characters well.
对绞车的工作特性进行分析，采用大林算法，设计了一种恒速度数字控制器，给出了控制模型和数学公式。
Analyzing the characteristic of the hoist, a kind of digital controller of constant speed is designed using Dahlin arithmetic, the model and formulas are presented.
本文从数值模型出发，分析了混合型TEA CO_2激光器的工作特性。
The operating characteristics of a hybrid TEA CO2 laser are analysed based on a numerical model.
针对水的汽化压力高、容易发生气穴的特点，应用气穴模型理论对阻尼小孔中以水作为工作介质时的流动特性进行理论分析。
Aiming at the high vaporous pressure and easy cavitation occurrence of water, the cavitation flow in orifices using water as working media is analysed theoretically by applying cavitation model.
研究了连续油管的工作力学特性，建立了连续油管弯曲、抗内压强度和外部挤毁压力、直径增长、纵向伸长及卡点位置分析计算模型。
Mechanical characteristic of ct is studied. The model of bending, internal pressure strength and external collapse strength, diametric growth and stuck-point of ct is established.
通过建立修正角模型，可使实现的平显仿真工作画面在外观上和操作特性上与实际平显工作状态一致。
The emulational working menu is in accord with the really HUD on the appearance and the operating characteristic according to establish the model of the correction Angle.
工作流模型是工作流管理系统的基础，它决定了系统的行为和功能特性。
Workflow Model is the foundation of the workflow administrative system, which determines the systematic behavior and function characteristic.
使模型较准确的反映了心轨的结构特性和工作状况。
So the model can reflect structure characteristic and work state of point rail exactly.
第二章中，介绍了我所作的工作，建立了一个基于能量的描述宏观和微观的统一模型，对物种特性进行了分析。
The second chapter shows the work I do, introduces a unified of micro and macro ecosystem based energy and makes an analysis of the species characteristic.
由这若干个小偏差动态模型组合成描述全工作范围动、静态特性的发动机模型。
These segments assembled the engine model with property of dynamic and static state in the whole operating range.
根据平台的特性，水稻栽培专家系统的核心工作是基础数据库、模型库和知识库的建立。
According to the character of PAID, collecting database, designing model and knowledge database is the essential work in build Expert System of Rice Cultivation.
然后，建立系统动态模型，对其动态特性进行非线性仿真研究，并就环境因素变化对系统工作特性的影响作了详细分析。
Based on the nonlinear model, the dynamic characteristic is simulated, by considering the influence of the environmental and geometrical factors, such as oil modulus, chamber volume etc.
本研究以工作特征分析为基础，对体验式培训师工作特征进行行为描述，分析个体在这些维度上人格特征的差异，从而构建基于工作特性的人格模型。
Based on the analysis of job traits and abstract the main job trait dimension, carrying on a behavior description to the work characteristic, the article constructs this personality model.
分析了工作原理和数学模型，研究了它的抗干扰特性，给出了离散随机脉位序列调制码的产生方案。
The block diagram of the system is given and its working principle and mathematic model are analyzed. And also, its anti jamming performances are studied.
该模型可以用于汽车侧向动力学特性及其控制的研究工作。
The nonlinear model can be applied for the further research of vehicle lateral dynamics characteristics and its control.
本文提出支持动态修改的可适应工作流模型，从时间和过程两个角度分析了工作流动态特性的表现。
In this paper an adaptive workflow model supporting dynamic modification was given. The dynamic characteristics of workflow were analyzed from the points of view of time and process levels.
通过验证的模型随后被用于研究软组织材料特性对颈部动力学响应的影响的参数分析工作。
A parameter study was carried out to investigate the influence of the soft tissues properties to the neck biomechanical response.
论文主要工作有：1。通过分析信号在无线信道的传播特性，建立了无线信道模型。
The main contents of the thesis are displayed as follows: 1. Wireless channel model has been established by analyzing the signal propagation characteristics in wireless channel.
目前PD P放电单元工作特性的CAD研究方法主要有两类，流体力学模型法和等效电路模型法。
There are two main kinds of CAD method to study the property of PDP cell now, the fluid model and the equivalent electric circuit model.
通过带调压室水电站的模型试验和数值仿真计算，分析了阻抗式调压室在各种水力过渡过程下的水力工作特性。
The hydraulic characteristics of the throttled surge chamber under various hydraulic transition processes are analyzed through combination of numerical simulation and model test.
结果表明，这样产生的双线性模型能此线性近似模型在较宽的工作范围内精确地近似反应器的动态特性。
The results show that the reduced bilinear model developed can approximate the reactor dynamics more accurately than the linear one over a much wider range around the operating state.
并详细分析了传感器系统的工作原理，给出了系统的数学模型，对系统特性进行了实验研究。
The mathematical model of the whole system is given. In addition, an experiment is given to study the properties of the proposed system.
本文首先分析了工作流长事务的特性，并针对工作流中频繁出现的长事务问题基础上提出了一种多层事务模型FLTM。
This paper first analyzes the characteristics of workflow transaction , and on the basis we propose FLTM, a multilevel transaction model.
文中简单介绍了混波室的工作原理，理论分析模型，统计特性，混波室设计中的若干问题。
In the article, the principle of the Reverberation-Chamber, the model of theory analysis, character of statistics, and some problem in design the Reverberation-Chamber had been introduced tersely.
文中简单介绍了混波室的工作原理，理论分析模型，统计特性，混波室设计中的若干问题。
In the article, the principle of the Reverberation-Chamber, the model of theory analysis, character of statistics, and some problem in design the Reverberation-Chamber had been introduced tersely.
应用推荐