超声检测方法能够有效地解决粘接界面粘接质量的无损检测。
Ultrasonic testing can solve the problem of non-destructive testing of adhesive quality of the adhesive interface effectively.
结果表明，辐射增强界面反应方法是改善不相容聚合物共混物界面粘接的有效途径。
The results show that to enhance the interfacial reaction by radiation is an effective method for improving the interfacial adhesion between th...
采用正交回归设计的试验方法优化复合材料工艺，所制得的复合材料性能优异，纤维与基体界面粘接良好。
Composites process is optimized by orthogonal regression design method. The result shows that this composites is of good property and fiber binds well with resin matrix surface.
实验结果表明，该泡沫材料不仅具有良好的力学性能，而且具有普通硬质聚氨酯泡沫所没有的良好界面粘接性能。
The results showed that PUF not only had the outstanding mechanical properties but also had good interfacial bond property.
除了对粘接剂的研究外，纤维桩表面处理是增强界面粘接强度的常用方法之一，它可以促进不同成分之间形成化学和机械固位。
Nowadays, the research focuses on the adhesion and retention of fiber posts. Besides the research on cement, surface treatment is widely studied to enhance the interfacial bond strength.
这样，显然，复合材料界面上的纤维与基体的粘接是复合材料失效的基础。
It becomes clear, then, that adhesion of the fiber and the matrix at the composite interface is fundamental to the failure of the composite.
拉伸断裂界面的的SEM分析也表明二种纤维与基体的粘接状态不好，但复合材料同样具有良好的力学机械性能。
SEM analysis of tensile rupture interface also indicates that two fibers with PMMA matrix bind not well, but their composites have good mechanical property.
界面良好的粘接使铝合金和复合材料形变相协调，能够很好的提高铝合金内衬复合材料高压容器的耐疲劳性能。
The good interface bonding can make the aluminum alloy liner and composites deform consistently and it can also improve the anti-fatigue performance of the composites vessels.
对于给定的层状平面结构，将粘接层的固化过程用于模拟粘接层界面强度的变化过程。
For a given layered planar structure, we use the solidifying process of the adhesive layer to simulate the change process of interface strength of the adhesive joint.
是很好的界面偶联剂和粘结促进剂，少量添加可明显改善材料的可漆性，粘接性和相容性。
Is a very good interface bond coupling agent and promoter, Add a small amount can significantly improve the material of paint, adhesive, and compatibility.
结果五种粘接系统在湿粘接时都可以形成比较理想的粘接界面。
Results All five bonding systems were infiltrated into the collagen fibril net of demineralized dentin.
拉伸断裂界面的的SEM分析也表明二种纤维与基体的粘接状态不好，但复合材料同样具有良好的力学机械性能。
SEM analysis of tensile rupture interface also indicates that two fibers with PMMA matrix bind not well, but their composites have good mechanical...
研究结果表明，碳纤维与玻璃纤维和PM MA基体粘接的界面状态类似。
The result indicates that CF is simular with GF in binding with PMMA matrix.
界面良好的粘接使铝合金和复合材料形变相协调，能够很好的提高铝合金内衬复合材料高压容器的耐疲劳性能。
The aluminum alloy and composites have different deformation ratio, so the anti-fatigue performance of aluminum alloy liners is very poor.
在成型及贮存过程中，湿度是影响丁羟推进剂药柱性能及各界面的联合粘接强度的首要因素。
During the molding and storing process, humidity is the foremost factor affecting the characteristics of HTPB propellant grain and adhesion strength between interfaces.
研究了不同类型的有机硅密封胶对PE、PP材料的粘接性能，结果表明交联剂和界面因素是影响有机硅密封胶粘接性能的主要因素。
The bond properties of different silicone sealants to PE and PP materials were studies. The results showed that the crosslinkers and interface conditions were the key factors of bond properties.
环境湿度对覆膜砂铸型（芯）性能的影响是通过粘接桥界面上水分的积聚而起作用的。
The authors believe that water accumulated on the surface of adhesion bridge neck from the sand-resin surface and atmosphere is a very factor to hot cracking tendency of resin coated sand.
目的研究不同粘接剂与不同的粘接界面处理方法对陶瓷全冠咬合强度的影响，选择最佳粘接方式。
Objective This research is to choose the best bonding way of ceramic crown by investigating the effects of different bonding agents and interfacial treatment on the occlusal strength of ceramic crown.
目的研究不同粘接剂与不同的粘接界面处理方法对陶瓷全冠咬合强度的影响，选择最佳粘接方式。
Objective This research is to choose the best bonding way of ceramic crown by investigating the effects of different bonding agents and interfacial treatment on the occlusal strength of ceramic crown.
应用推荐