通过计算获得了界面温度、速度、溶质浓度及非平衡分配系数随界面位置的变化。
The interface temperature, velocity, solute concentration and non-equilibrium partition coefficient varying with interface location are calculated.
挤压温度过高或过低导致界面结合强度降低。
The bonding strength of the composite interface is reduced when too low or too high extrusion temperatures are employed.
多层膜化促进有序化在较低的温度下进行，这是由于热处理过程中多层膜界面的消失提供了有序化过程额外的驱动力。
Relatively low ordering temperature for the multilayer is due to the extra driving force of ordering process caused by the vanishing of the multilayer interface at annealing.
提高温度有利于出现内聚破坏，而提高实验速度则易于出现界面破坏。
It prefers cohesive failure at high temperature, otherwise it tend to interface failure at high loading rate.
研究了不同热处理温度对爆炸焊接复合钢板结合界面组织和性能的影响。
The influence of heat treatment temperature on the binding interface morphology and properties of explosive cladding steel plate was studied.
通过力学性能测试、扫描电镜及透射电镜观察，研究了冷轧压下量及时效温度对内生复合钢板弱界面结合强度的影响。
Mechanical properties testing, SEM and TEM was used to study the effects of cold rolled reduction and aging temperature on the cohesion of the weak interface of DISC.
对定向凝固区域熔化液态金属冷却法的固液界面前沿温度梯度进行了测定。
The temperature gradient in front of S/L interface was measured on Zone Melting Liquid Metal Cooling(ZMLMC) directional solidification apparatus.
人机界面液晶触摸屏控制，可控制进出口温度、气流、空气压力、自动疏通阻塞频率和流量等。
Using proface touchable interface display operation, operator can control temperature, airflow volume, air pressure, pump speed and de-blocker frequency.
针对微孔塑料挤出的全过程，对影响气泡成核、成长及泡孔密度的诸多因素如预定型压力、熔体温度、粘度、气泡界面张力、定型卷取速度。
Many factors affecting cell nucleation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfacial tension, take-up speed and the te.
研究表明，增加变形程度和选择合适的轧制温度能提高复合板的界面初结合强度。
The results indicated that increasing the deformation and a proper rolling temperature may improve obviously the bonding strength.
以琥珀腈为研究对象，用设计的定向凝固实验体系，研究了不同温度梯度和界面生长速度对固液界面形貌的影响。
The effects of temperature gradient and interfacial growth velocity on solid-liquid interface morphology were studied with succinonitrile under the unidirectional solidification system.
随着烧结温度的升高，元素扩散加剧，过渡层的厚度越厚，材料的层间界面结合强度升高，石墨层与BN层结合的越好。
With increasing sintering temperature, the joint of graphite and BN was increased and also there was transition layer in the interfaces relative to HP.
分析不同界面热阻对温度分布以及凝固过程的影响。
The effects of interface thermal resistance on the evolution of temperature and solidification are discussed.
气体经喷嘴进入聚合物熔体时所形成的气熔界面的运动情况随着进气压力、熔体温度等不同参数的改变而发生变化。
The interface motion situation of gas-melt is changed when injecting gas into melt in various conditions-gas-entering pressure, melt temperature and so on.
实验结果表明：提高浇注时复合试样的整体温度有利于获得界面的冶金结合。
The result shows improving complex sample's temperature is good to gain metallurgical bonding interface.
研究了不同渗流时间和渗流温度对非晶复合材料界面反应的影响规律。
The influence of infiltration temperature and time on the interface reaction was investigated.
基于烟气特性参数将烟层界面的判定方法分为温度判定法、能见度判定法和燃烧产物浓度判定法。
Classifies the determination methods into those by temperature profiles, visibility profiles and combustion product concentration profiles in terms of characteristic parameters of smoke.
OH键、杂质以及界面等因素是石英纤维析晶温度低于石英玻璃的主要原因。
The Si—OH bond, impurity and phase interface are the important factors for the crystallization temperature of the quartz fiber to be lower than that of the quartz glass.
薄膜电阻率随退火温度的变化行为与薄膜微观结构的变化以及界面扩散有关。
The annealing behavior of the resistivity is correlated with the microstructure and interfacial diffusion of the films.
对影响转印膜质量的各种因素包括活化剂、界面剂、转印温度等进行了讨论。
Various influential factors including activator, bonding-agent and transfer printing temperature etc, on transfer coating quality were discussed.
该无人机仅有的用户界面是一块平板，让乘客自行选择起飞还是降落，同时还可调节空调温度。
The only user interface in the drone is a tablet which gives the passenger the options to take off and land as well as adjust the air-conditioning.
固液界面处温度的精密测量是晶体生长动力学研究的一个重要实验数据。
In studying the kinetics of crystal growth from the melt, it is extremely important to measure the crystallization front temperature.
通过数值模拟，获得了停输期间温度场、流场以及土壤水分结冰界面和管道中原油凝固界面的分布情况。
Temperature and flow fields, and interfaces of water freezing in soil and crude oil solidifying in the pipeline were obtained through numerical simulation.
统计获得了界面区的密度、压力张量及温度的分布，并且从分子层次观察分析了界面结构和动力学特性。
The density, the pressure tensor, and the temperature profiles are obtained. Meanwhile, the structure and the dynamic behavior of the interface are analyzed from the molecular level.
表面蒸发受蒸汽温度、汽液界面的温度以及汽液压力差的共同控制。
The surface evaporation is influenced by vapor temperature, vapor-liquid interfacial temperature and vapor-liquid pressure difference.
从混凝土组成的细观角度出发，研究水泥砂浆包围的骨料，在温度荷载作用下首先在骨料与砂浆的界面上产生界面微裂缝。
In the view of the concrete's minute construction, cement and mortar encircled bone, there is tiny crack on interface of bone and mortar under temperature load.
分析了微孔渗流中的界面现象及其作用；讨论了温度、压力等参数变化时，界面参数、多孔介质参数的变化导致界面现象的变化，从而影响流体在微孔中的行为。
This paper analyzed the function of interfacial phenomena, the parameters of interphase and porous material varying with the temperature and pressure acting on the flow.
由于高温下合金中相界面的软化及粘性滑动，四种合金在高温下均存在一个温度内耗峰，只是出现的温度不同。
There exists a damping peak in all of the alloys with different temperature because of the viscous sliding or slipping of the grain boundaries and interfaces at high temperature.
实验结果表明在恒定温度下界面张力随压力的增加而增大。
The results show that the interface tension decreased with increasing pressure when temperature was specified.
实验结果表明在恒定温度下界面张力随压力的增加而增大。
The results show that the interface tension decreased with increasing pressure when temperature was specified.
应用推荐