随扫描速度增加，界面形态由平直向波浪形变化；
The fluctuation is enhanced with the increasing of scanning velocity.
但因其解释受地表条件及界面形态的影响而表现出多解性。
However, its explaining result is represented ambiguity by the effect of the earth surface conditions and the conformations of interface.
应用扫描电子显微镜(SEM)分别对不同复合材料进行了界面形态和微观结构的研究。
By scanning electronic microscope (SEM) it was tested for the interfacial state and morphological structure of different composites.
并且分别利用原子力显微镜和傅立叶变换红外光谱对薄膜进行界面形态和微观结构分析。
The surface morphology and chemical structure of the film are characterized by Atomic Force Microscope (AFM) and Fourier Transform Infrared Spectroscope (FTIR).
变密度剖面显示技术能够直观地反映界面形态变化，但不如变面积显示的剖面反射层次清晰。
Although variable density also gives an intuitive interface to reflect changes of geometry, yet it is not as clearly as variable area in stratification.
应用扫描电子显微镜(SEM)，分别对不同复合材料进行了界面形态的观察，证明与试验结果一致。
With the help of scanning electronic microscope (SEM), the same conclusion is proved by the interfacial state and morphological structure of the composites.
熔体过热处理的弛豫过程和引起的不可逆过程使熔体状态变化出现滞后效应，从而影响定向凝固界面形态稳定性。
The influences of hysteresis and relaxation of melt superheat on the morphological stability of interface in directional solidification were described.
本文用SEM和ESCA技术研究了碳纤维增强PEK - C复合材料中纤维和基体间的界面及其复合材料的断裂界面形态。
Interfaces between fibre and matrix in carbon fibre reinforced PEK-C composites and morphology of fracture interfaces of the composites are studied with SEM and ESCA techniques in this paper.
改进一个计算机界面，形态是关键。
电话拨号盘直到1919年才出现，那时西方电气公司(Western Electric)首批自命的“用户界面科学家”认真研究什么才是最直觉的形态。
The telephone dial didn't appear until 1919, when the first group of self-designated "user interface scientists" at Western Electric considered what the most intuitive form should be.
现代的用户界面科学家对katachi很感兴趣，因为它能揭示形态如何促进了人类的交互作用。
Modern user interface scientists are interested in katachi because it can reveal how form facilitates human interaction.
目的模拟单个下颌磨牙缺失的种植修复，分析不同下颌骨形态对种植体骨界面应力分布的影响。
Objective to study the influence of different shape of lower jaw on stress distribution at bone interface in the mandibular molar region of implant restoration models.
用扫描电子显微镜(SEM)对包膜肥料的表面、界面及养分溶解释放后的表面进行了微观形态结构研究。
Morphological microstructure, such as surface, interface and surface of coated fertilizer after nutrient being released in water, was studied by scanning electron microscopy (SEM).
种植体周骨界面上的应力分布不随形态的改变而发生明显的改变。
There is no obvious change on the stress distribution of the implant-bone interface as the change of the implant shape.
同时通过SEM分析对粉尘与细菌作用过程中细菌形态和界面作用的情况进行了研究。
The SEM analysis has been used to study the bacterial form and interface action status in the course of reaction between dusts and bacteria.
同时，作者也期望在此基础之上，分别对该时期室内空间的形态、组织方式、界面装饰、室内家具及陈设进行研究和总结。
Besides, the author also hopes to study and summarize the form, organization method, interface decoration, indoor furniture and ornaments of that period.
反演的界面起伏形态可与已知井的测深资料相对比，平均深度误差为10％，最小的深度误差仅有2％。
The undulation shape of inversion interface can be correlated to that of sounding data at known borehole, the average depth error being 10%, and the minimum depth error being 2% only.
目的探索关节软骨钙化层的结构形态及其与软骨非钙化层和软骨下骨之间的界面连接方式。
Objective To explore the shape and structure of calcified cartilage zone and its interface between the non-calcified articular cartilage and subchondral bone plate.
在天花设计上运用造型简洁、形态纯粹、界面连续的吊顶。
In the smallpox design using the modelling concise, form of pure, interface continuous condole.
本文通过对空间形态的分析，阐明了室内空间是通过室内界面限定而成，并对室内界面、空间塑造和空间装饰进行了探讨。
With the analysis of space shape. this article shows us that interface limits interior space and talks about interior interface, space shaping and space decoration.
总结了复合微粒形态的热力学预测方法，尤其对界面自由能量的变化最小原则进了评述。
The thermodynamic approaches to predict particle morphology were summarized and the rule of minimum interfacial free energy change was discussed in detail.
对14个配有钢筋的新旧砼界面连接节点进行了破坏性的试验，得出了破坏形态及其承载力的计算公式。
This paper deals with a destructive test of 14 new and old concrete reinforced boundary connections. The destructive patterns, loaded capacity and shear_resistant calculation formula are given.
采用显微硬度仪和扫描电镜，对比研究了干燥大温差气候条件和标准养护条件下混凝土界面过渡区的结构和形态。
The interfacial transition zone (ITZ) of concrete cured in standard condition and in the dry and wide temperature change environment was studied comparatively.
利用此种剖面可以直接确定球界面的空间形态。
The spatial shape of sphere reflector can be directly determined using this kind of seismic section.
界面是生成空间、限定空间形态和传达环境意义的物质实体。
Interface is the material substantiality of generative space, limited spatial forms and the environment meaning.
采用拉伸屈服强度定量表征了界面相互作用的强弱，研究了界面相互作用对三元复合体系拉伸断裂形态的影响。
Tensile yield strength was used to quantitatively evaluate the interfacial interactions, which have significant influence on the tensile fracture morphology of the composites.
变面积剖面显示技术能够反映界面的形态，直观性强，外形与地质剖面接近，其缺点波的动力学特征不清。
Variable area can clearly show the interface geometry and moreover, it gives a strong intuition, but it has a disadvantage in depicting the features of the dynamics.
结果表明，界面相容剂的化学偶联对促进两相之间的界面结合和改善共混物的微观结构形态起着重要作用。
As a result, the chemical coupling of compatible agent plays an important part in the amelioration of interface combination between two phases and micro-structure morphology of blands.
主要探讨了加工机床宜人性设计的四个方面：造型形态、界面、色彩、表面装饰，并针对塑料回收机的造型提出总的设计思路。
This paper mainly discusses about four aspects of ergonomics design for the machine tool, appearance, interface, color, decorating and so on.
介绍了利用反射走时联合反演地震界面起伏形态和速度横向分布的方法。正问题采用了一种简单而有效的二维介质中两点射线追踪方法。
This paper describes a joint inversion method of the topography of seismic interfaces and lateral velocity distribution using travel times of reflections.
应用推荐