本文建立了一种新的两层流模型，考虑了界面变形对系统稳定性的影响。
In the present paper, a new two-sided model is proposed and the interface deflection is taken into account.
用变形工具(COMMAND +T)将它们放置在合适的位置，并修整它们以适合界面。
Place them using the Transform Tool (Command + t) and fit them to the interface pieces.
结果表明，现行的单钢管桩属于界面的粘结破坏，承载力低，变形能力弱，不能充分发挥材料特性。
Single pipe pile shows sliding failure at interface and cannot utilize the strength of material; the bearing capacity and deformation ability are low.
采用实验研究的方法，探讨锚固体界面力学特征、在荷载作用下变形规律以及界面上的应力分布规律。
The stress characteristic of the interface, deformation rule under the action of load and the stress distribution rule were discussed by adopting the experimental research method.
通过采用线弹性理论和剪滞理论，对纤维和基体的变形及其界面应力进行了分析。
The deformation and interfacial stress of fiber and matrix are analyzed based on the linear elastic method and shear-lag theory.
研究表明，增加变形程度和选择合适的轧制温度能提高复合板的界面初结合强度。
The results indicated that increasing the deformation and a proper rolling temperature may improve obviously the bonding strength.
该方法可真实模拟界面的各种复杂变形。
The method can simulate complex form of deformation caused by rock joints and interfaces.
讨论了碳化硅与铝基体之间的界面液相对超塑变形的影响。
The effects of interface liquid phase between SiC particle and aluminium matrix on the superplastic deformation of aluminium composite were discussed.
通过计算绝热压缩温升和畸变形能沉积产生的温升，给出熔化判据，定量估计出了在小碰撞角下爆炸焊接界面熔化层厚度。
Throughcalculation of temperature rising callused by them, melt criterion is given, the thickness of melted layer near explosive welding interface with small collision Angle is estimated.
界面近区基体金属发生了剧烈的多种形式的塑性变形，变形主要集中于波前漩涡附近。
Intense and manifold plastic deformation occurs in parent metal near interface zone, and deformation mostly fastens on eddy in front of wave.
利用块体动力模型研究表明：块体界面的动力变形与稳定性的影响效应规律与块体及界面的体变能力及块体大小密切相关。
The study on dynamic model of block indicates that the interface effects of blocks are related with the size of block and the capability of bulk deformation included in block and interface.
研究了扩散控制的界面滑动对纤维复合材料的横向剪切变形行为的影响。
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied.
提出的模型可同时考虑桩底土的非线性、桩侧界面接触非线性及桩周土体受剪的非线性变形。
The nonlinearity of soil deformation under the pile bottom or the pile side, and the contact nonlinearity at the interface between the pile and soil are considered.
得到各种情况下组合梁界面滑移分布曲线及弯矩-挠度曲线，分析其变形性能。
The interfacial slip reduces the stiffness, increases deformation and influences performance of composite beams of steel and concrete.
分析了表面处理方法、冷变形、扩散退火温度和时间等工艺因素对界面结合强度的影响；
The influences of process parameters include surface preparation method, cold deformation, diffusion temperature and time.
我们的结果表明变形相界面和巨压电效应并不需要内禀的无序，并打开了在简单系统中研究这一效应的可能性。
Our results show that morphotropic phase boundaries and giant piezoelectric effects do not require intrinsic disorder, and open the possibility of studying this effect in simple systems.
这是因为该复合材料中形成了共析组织，且相界面增多，塑性变形抗力增大，硬质点数量增多。
The main reasons are the forming of eutectoid structure, the increase of the phase interfaces, the enhance of the plastic deformation resistance, as well as the increase of the hard particles.
爆炸焊接界面附近温升是由爆炸绝热压缩和畸形变形能沉积两者造成的。
The temperature rise near explosive welding interface is caused by explosive adiabatic compression and abnormal energy deposition.
结果表明，分层裂纹是受力变形时管线钢内部的薄弱界面受到三维应力作用的结果。
It was indicated that the delamination cracking is caused by the effect of 3d stress on the weak interfaces during deformation and appears before beginning or acceleration of main crack.
强大的应力使材料发生塑性变形，产生塑性流动，为界面生成键合强度提供良好的条件；
The powerful stress is big enough to cause plastic strain and plastic flow on the interface which can provide good conditions for bonding.
在预应力锚索锚固段界面力学特性试验的基础上，研究锚固体界面在荷载作用下的变形规律及失效条件。
Based on the test of interfacial mechanics of prestressed anchorage segment, the interfacial deformation laws and the failure conditions under different loads are studied.
第三期变形为沿盆地内不同时代地层界面或同一地层不同岩性界面发育的伸展拆离构造；
The third phase deformation is normal fault that developed along the formation interface from different times or the same stratum with different lithology in the basin.
基于一阶剪切变形板理论，推导了功能梯度材料圆形板在边界面内均布压力作用下的轴对称屈曲方程。
Based on the first-order shear deformation plate theory, axisymmetric governing buckling equations are derived for a functionally graded material circular plate subjected to in-plane pressure.
采用损伤边界面，通过规定加荷或反向加荷产生损伤变形，卸荷不产生损伤变形来描述损伤塑性变形。
It is stipulated that damage deformation occurs under loading or inverse loading conditions rather than under unloading condition.
采用合适的土体屈服准则及有限变形理论，通过在桩—土界面设置接触以及在桩顶施加位移荷载建立了符合压桩实际的有限元模型。
An appropriate finite element model was given according to the actual process of jacked pile. This model adopted the rational constitutive model of soil and finite deformation theory.
运用有限元模拟交通荷载长期作用下的土体变形对桩土界面的影响。
Something alike the result of the after earthquake in the fully saturate soil groundStimulating the deformation which traffic load long time effect with FEA, though 3 different conditons.
变形量更大时，变体界面共格性被破坏，部分马氏体丧失热弹性。
With the increase of the deformation, the coherent boundaries between the variants are destroyed, a part of the stress-induced martensite lose the thermoelasticity.
接头界面有效连接面积和接头上引线横截面变形量的变化分别是造成接头电阻波动性和整体增大趋势的原因。
The real contact area of the bond interface and the cross-sectional deformation of the bond wire were the causations respectively for the fluctuation and wholly increase of the resistance.
接头界面有效连接面积和接头上引线横截面变形量的变化分别是造成接头电阻波动性和整体增大趋势的原因。
The real contact area of the bond interface and the cross-sectional deformation of the bond wire were the causations respectively for the fluctuation and wholly increase of the resistance.
应用推荐