但界面反应的产生，并不能有效改善其润湿性。
But the interface reaction can not improve the wettability effectively.
改善制备工艺应从控制界面反应和细化组织着手。
Improving manufacturing techniques should be started with controlling interface reaction and fining the structure of the composites.
对界面反应层的观察表明，反应层分为两层结构。
The observation of interfacial reaction layer showed that it is a two-layer structure.
改善制备工艺应从控制界面反应和细化组织入手。
Improvement of manufacture techniques should start with controlling interface reaction and fining t...
氧化控速过程为“界面反应和扩散混合控制过程”。
The oxidation control factor is "the mixed control of interface reaction and diffusion".
增强体与基体合金界面非常洁净，没有任何界面反应。
The interface between reinforcement and matrix alloy is very clean, there is no interfacial reaction.
界面反应的存在提高了润湿性，促进了无压自发浸渗。
The interfacial reactions enhance the wettability and promote the spontaneous infiltration process.
这些界面反应物主要来自挤压铸造时粘结剂与熔融的镁反应。
These interfacial reaction products are mainly from the reaction between the binder and the melted magnesium.
结果表明，玻璃颗粒较均匀地分布于基体中，与基体发生界面反应；
It was found that the waste glass particles are distributed uniformly in matrix alloy.
本文简要介绍了环境矿物界面反应动力学理论，并给出几个应用实例。
This article gives a brief introduction about the kinetic theory of the interface reaction of environmental minerals and some application examples.
研究了不同渗流时间和渗流温度对非晶复合材料界面反应的影响规律。
The influence of infiltration temperature and time on the interface reaction was investigated.
受电极界面反应影响，电极在探测信号时对应着一个最佳工作频率范围。
The optimum of frequencies of the electrode was limited by the rate of the reaction on its surface.
本论文提出并利用界面反应生长和铝热法制备出一系列的纳米功能材料。
This thesis brought up and utilized interfacial reaction growth (IRG) and aluminothermal reaction (ATR) approaches to fabricate a series of functional nanomaterials.
重点介绍了以界面反应为主、扩散为主的反应机理和活度控制的金属相变机理。
And the paper emphasized on the interface reaction mechanism, diffusion mechanism and metallic phase transformation mechanism which is controlled by activation.
结果表明，辐射增强界面反应方法是改善不相容聚合物共混物界面粘接的有效途径。
The results show that to enhance the interfacial reaction by radiation is an effective method for improving the interfacial adhesion between th...
结果表明，辐射增强界面反应的方法是改善不相容聚合物共混物界面粘结的有效途径。
Results show that the method of radiation enhancing interphase reaction is an effective path for improving incompatible polymers' interphase adhesion.
结果表明：铝铜薄膜通过界面原子间的范德华力、冶金结合以及界面反应实现无胶连接。
The results show that the force among atoms, metallurgy combination and interface reaction are important to obtain the high quality joint of the aluminum and copper films.
建立了铝液中氢的界面反应过程的数学物理模型，对界面反应过程进行了动力学推导和计算。
The mathematic physics model for interface reaction of Hydrogen aluminum melt is carried out in this paper. The kinetics formula of the reaction process has been deduced and calculated.
另外，对金属基复合材料的润湿性、界面反应、复合材料力学性能和有限元模拟作了简单介绍。
In addition, the wettability, interfacial chemistry, mechanical properties of metal matrix composites and finite element analysis about metal matrix composites are simply studied.
研究发现，焊缝中存在的界面反应物、气孔缺陷，是导致该种材料焊接性显著降低的主要因素。
The results show that the defects in the weld such as interface reactant and pore are the key factors to reduce the material weldability.
结果表明，真空烧结过程中出现了界面反应，改善了界面结合强度，断裂破坏主要在基体上进行。
The results show that interface element diffusion and reaction on interface in vacuum hot-pressing sintering processing improved interface strength. Fracture occurred mainly in Al matrix.
在连接温度为1403K的条件下，随着连接时间的增加，界面反应层厚度先快速增加，再缓慢增加。
When bonding temperature was 1403 K, reaction layer grew fast at first and then slow down with the increase of bonding time.
用离心铸造的方法获取碳化钨颗粒增强铁基复合材料，分析了复合材料的力学性能、微观组织结构及界面反应。
WC particles reinforced iron matrix composites were manufactured by the centrifugal casting technique. The mechanical properties, microstructure, interface reactions of the composites were analyzed.
研究了一种新型钛合金精密铸造用型壳——氮化硼基复合型壳及其与钛镍合金的界面反应和反应层的形成机制。
A new kind of boron nitride based shell mold used for investment casting titanium alloys was fabricated and the reaction between it and Ti-Ni alloy was investigated.
本文讨论金属基复合材料的界面反应，界面对性能的影响，以及控制界面反应和优化界面结构的有效途径等问题。
In this paper, interfacial reactions in MMCs, the effects of interfaces on properties and the effective ways to control interfacial reactions and to optimize interfacial structures were discussed.
结果表明，氧化锆陶瓷型芯的物理性能能够满足钛合金高尔夫球杆头铸造要求，该陶瓷型芯与钛合金液不发生明显的界面反应。
It is shown that the ceramics core is excellent in the physical characteristics. And it is not obvious in the interface reaction with liquid of titanium.
指出，通过控制基体中的添加元素含量便可控制复合材料中界面反应及出现的相，界面反应对材料的制备过程及其性能有重要的影响。
The interface reaction is discussed by the thermodynamics and kinetics. It is pointed that the reaction can be controlled by adding alloying elements to matrix in order to improve compos...
指出，通过控制基体中的添加元素含量便可控制复合材料中界面反应及出现的相，界面反应对材料的制备过程及其性能有重要的影响。
The interface reaction is discussed by the thermodynamics and kinetics. It is pointed that the reaction can be controlled by adding alloying elements to matrix in order...
“体验关键字”描述的是这个人物角色在看到界面时，“最初五秒钟”的情感反应。
Experience keywords represent the "initial five-second" emotional reaction that personas should feel when viewing the interface.
“体验关键字”描述的是这个人物角色在看到界面时，“最初五秒钟”的情感反应。
Experience keywords represent the "initial five-second" emotional reaction that personas should feel when viewing the interface.
应用推荐