熔体的表面性质、界面性质是研究熔体界面动力学的基础。
The surface and interphase properties of molten liquid is the base of researching the interphase dynamics of molten liquid.
采用交流阻抗法研究硫化矿碳糊电极体系在氯化钠电解液中的界面动力学行为。
The interface dynamic behaviors of sulfide mineral carbon paste electrodes in NaCl electrolyte were investigated by alternating current impedance technique.
晶体生长理论研究包括晶体成核理论、输运理论、界面稳定性理论、界面结构理论和界面动力学理论的体系。
Research on the growth mechanism of crystal includes the system of crystal nucleation theory, conveying theory, interface stabilization theory, interface structure theory and interface dynamic theory.
并对晶须生长过程中所形成的各种晶体缺陷进行了分析，提出了解决办法。同时对羟基磷灰石晶须针状生长的结晶学和界面动力学机理进行了探讨。
The paper also analyzed the crystal defeat formed in the process of growth and put forward to the solution, furthermore, the mechanism of needle - like growth was discussed.
设计了一个数值模型来模拟一个反应物在明胶层中边扩散边在油珠界面上与另一个反应物反应的动力学过程。
A numerical model was designed to simulate the kinetic process of diffusion and reaction of one reactant with another on the interface of droplets in a gelatin layer.
陆架浅海沉积物—海水界面上的溶解态生源物质通量的准确估算是海洋生态系统动力学研究中的关键性问题之一。
One of the key issues in the marine ecosystem dynamics studies is to accurately estimate the dissolved biogenic substance flux across the sediment-seawater interface in the shelf sea.
气液界面存在同向或反向切应力时，在一定程度上影响到液膜的水动力学特性和流动稳定性，并改变其热质传递特性。
The shear stress at the liquid-gas interface plays an important role on characteristics of the hydrodynamics, flow stability and heat transfer of liquid film.
本文简要介绍了环境矿物界面反应动力学理论，并给出几个应用实例。
This article gives a brief introduction about the kinetic theory of the interface reaction of environmental minerals and some application examples.
利用前人的实验数据，进行了水合物分解的动力学分析，认为温度在零度以上时，水合物分解反应由界面化学反应过程控制。
Dynamics analysis was done by use of experimental data from the literature, which indicated that interface chemical reaction was the control of the process.
观察和研究的结果表明：关于光滑界面生长动力学的BCF模型、关于杂质对台阶生长阻碍作用的CV模型等已受到冲击与挑战；
The BCF model about smooth interface growth kinetics and the C V model about impurity stopping step have been collided with the AFM study results.
剪切波状液膜作为一种重要的液膜流动形式，因受界面剪切力的影响，其水动力学特性和流动稳定特征与自由降膜流动明显不同。
The sheared wavy liquid films, as an important flow, have notably different hydrodynamics and flow stability under interfacial shear stress from those of free falling liquid films.
特定过冷度下的层片间距与正向界面推移速率的关系是珠光体生长动力学的主要问题。
The relationship between the lamellar spacing and the edgewise growth velocity under the specific undercooling is the core of growth kinetics.
固液界面处温度的精密测量是晶体生长动力学研究的一个重要实验数据。
In studying the kinetics of crystal growth from the melt, it is extremely important to measure the crystallization front temperature.
本文对基于有限元动力学分析的煤岩界面识别的多传感器优化布置及管理算法进行了研究。
This paper has mainly studied the optimal sensor placement and management algorithm of coal-rock interface recognition based on finite element dynamic analysis.
采用包含软子结构的间接对接的混合界面子结构模态综合法，建立了整车系统非线性动力学模型。
Nonlinear dynamic model of total automobile system was established by mixed substructure component model synthesis which contains some soft substructures.
变面积剖面显示技术能够反映界面的形态，直观性强，外形与地质剖面接近，其缺点波的动力学特征不清。
Variable area can clearly show the interface geometry and moreover, it gives a strong intuition, but it has a disadvantage in depicting the features of the dynamics.
通过波形剖面显示与变面积、变密度的结合显示技术不但可以很好的直观反应界面状态，而且可以突出地震波的动力学特征。
By integrating the above three display methods, the combination way not only gives intuitive interface, but also highlights the features of the dynamics.
模型中小面区域的动力学系数与界面上的过冷度及取向角均有关。
The kinetic coefficient used in this model along the facet region is related both to local undercooling and to local crystallographic orientation.
统计获得了界面区的密度、压力张量及温度的分布，并且从分子层次观察分析了界面结构和动力学特性。
The density, the pressure tensor, and the temperature profiles are obtained. Meanwhile, the structure and the dynamic behavior of the interface are analyzed from the molecular level.
方法：分别采用界面电泳法、旋转式粘度计、电导法等方法，测定口服乳剂的电学、流变学、凝聚动力学等物理性质。
Method: The electricity, rheology and coalescence kinetics of oral harmine emulsion were determined by electrophoresis, viscometry and conductometry respectively.
该文借助树脂吸附的动力学过程进行超声场微扰效应和界面效应的研究。
This paper analyzes the effects of micro-disturbances and new interfaces on the resin adsorption dynamics.
在对气液界面层内热力学性质研究中，对计算机分子动力学模拟体系切片的划分影响着对其热力学性质的统计。
In the process of studying on the liquid-vapor interface, the number of slabs of system will influence the conduct of working out statistic thermodynamics properties.
采用分子动力学模拟方法，可以对结合材料的界面起裂过程进行模拟，从而获得结合材料界面应力和界面破坏之间的关系。
A simulation method of molecular dynamics is introduced to simulate the interface crack initiation, from which the correlations between the interface stress and the interface fracture are acquired.
虽然在分子动力学模拟中采用了高度简化的界面模型，但对界面破坏过程的模拟，仍可以帮助人们获得结合材料界面破坏过程的规律性认识。
In molecular dynamics simulation, a quite simplified model was used, but the simulation for the process of interface fracture also helps to acquire some rules about bi-material interface fracture.
该文基于患者行走过程的运动学和动力学特性，建立三维非线性有限元模型，研究动态载荷对界面压力的影响。
Based on the analysis of kinematic and dynamic properties during walking, a 3-d nonlinear finite element model was developed to analyze the effect of dynamic loads on the interface stress.
模型较好地吻合了界面上红曲霉生长的动力学曲线，反映了红曲霉固态发酵过程中微环境下的生长过程。
The model is fitting to the growth profile of Monascus on the membrane, and reflected the growth of Monascus in micro-environment with solid-state fermentation.
通过自组装修饰金电极的界面微分充电电容和膜的覆盖率考察了NS在环己烷中自组装膜的成膜动力学。
Using electrode interface capacitance and surface coverage to investigate the formation kinetics of NS monolayer in hexahydrobenzene solvent.
介绍用分子动力学模拟方法研究固体的体相结构，表面问题，界面问题以及薄膜形成过程等方面的研究成果。
It also summarizes MD simulation in the studies of solid bulk characters, surface problem, interface problem and the progress of thin film formation etc.
本文在经典汽泡动力学理论基础上，提出了描述汽泡生长过程的综合界面模型。
In this paper on the basis of the classical bubble dynamics, a new model is brought forward for the bubble growth in a nucleation boiling system-the comprehensive interface model.
本文提出了一种基于试验与参数优化组合的方法，解决了CK 14 16高速精密数控车床中界面的动力学建模问题。
A parameter optimal method based on test results is put forward in this paper. It is successfully applied to the dynamic model building of numerically controlled lathe CK1416.
应用推荐