除此之外还有利用差动变压器和扰曲线应变计的电感变换方式,以及变电阻式压力变送器。
Besides there is also some alternatives such as an inductance conversion using differential transformer and space curve deformeter and variable resistance pressure transmitter.
效果相当于跨工作应变片加了一个分流电阻器一样。
The effect is the same as that of placing a shunt resistor across the active gage.
适用于所有电阻应变桥式称重传感器。
Suitable for all resistance strain gauge load cell in bridge type.
适用于所有电阻应变桥式称重传感器。
Suitable for meeting an emergency in resistance to weigh the sensor in bridge type.
本文结合教学实践介绍电阻应变式传感器实验内容的优化设计,并谈了自己在改进时的目的和体会。
The text introduces the optimizing design of experimental context based on resistance strain transducer with teaching practice. The author expresses the intention of design and his comprehension.
该装置由电阻应变片式称重传感器、称重数字显示仪表及计算机数据处理软件联合组成。
The instrument is composed of the weigh sensor in form of electric resistance strain gage, weigh digital display instrument and computer data processing software.
本文介绍了电阻应变片传感器及其主应力公式和在地震予报中的应用。
This paper describes the transducer of the resistance strain gauge, the formulas for its principal stress and the application of the earthquake prediction.
井温和井下压力的测量分别采用铂电阻传感器和应变传感器测量。
Well temperature is measured with platinum resistance sensor while the downhole pressure with the strain sensor.
利用电阻应变片、动态压力传感器、滑环式引电器和磁带记录仪等,录取叶片振动应变和动叶出口压力信号,然后回放磁带,做信号处理。
Using resistance strain gage, dynamic pressure sensor, slip ring and tape recorder, the blade vibration strain and exit pressure signals of rotor blades are recorded and then processed.
文中以电阻应变式传感器为例,提出了具体的补偿方案。
In this paper, a detailed compensation scheme about resistance stain type sensor is put forward.
系统的硬件主要有:ZHJ-1B型电流传感器、自行研制的电阻应变式力传感器、电极间电压测量装置及NI-DAQ 6062E数据采集卡等。
The hardware of the system mainly consists of a ZHJ-1B current sensor, a self-made resistance strain force sensor , the device for measuring electrode voltage and a NI-DAQ 6062E data acquisition card.
试验梁通过弯曲破坏试验比较布拉格光栅传感器与电阻应变片的测试结果。
The interface transferring mechanism of FBG strain sensors and error modification have been studied.
针对空间柔性杆系统的扭转振动问题,提出了一类由柔性杆、电阻应变片传感器、压电扭转致动器组成的柔性杆系统。
Aiming at the torsional vibration of a space flexible bar system, a flexible bar system which consists of a flexible bar, a strain gauge sensor and a piezoelectric torsional actuator is proposed.
与电阻应变片的对比实验表明单模熔锥耦合器的耦合比不但对应变敏感,而且变化有单调性。
The result compared to the resistance strain gauge used widely in structure indicates that not only the coupling ratio of the coupler is sensitive to strain, but also the function is monetary.
用电阻应变仪对布拉格光栅光纤传感器应变传感特性进行实验对比标定,得出了表征fBG性能的应变传感灵敏系数。
A calibration test has been performed on FBG with strain gauges, and the strain sensing sensitivity coefficient of the properties of FBG was gained.
桥式电阻应变模拟传感器,优良的防潮密封,适应任何恶劣的工作环境。
Bridge resistance strain sensor, excellent moisture proof seal, suitable for any harsh working environment.
振动测试中分别采用加速度传感器进行位移模态分析以及电阻应变片进行应变模态分析。
Acceleration sensor is used to test modal displacement, and strain sensors are used to test modal strain.
试验结果表明,CFRM应变传感器的电阻在养护初期增长迅速,然后逐渐变慢,养护结束后很长一段时间内持续呈线性增长;
Results show that:the resistance of CFRM strain sensors grows rapidly at the beginning of curing age, and then slows down.
本文介绍了电阻应变式力传感器的设计、计算、工艺及测试,并介绍了几种不同精度和结构的传感器,其精度可达0.03% F。
In this paper, the design, calculation, technic testing of strain-gage type force transducer are introduced, and some of transducers are described. Accuracies of the transducers are 0. 03 % f.
驱动器内部藏有电阻应变式角位移传感器,具有机构、驱动、检测一体化的特点。
There is the micro displacement mechanism equipped with inner micro sensors in the module, which integrates mechanism, actuator and sensors.
通过位移传感实验,验证了FBG传感器与电阻应变传感器具有较高的精度。
With displacement sensor experiment, we discover that the accuracy of the FBG sensor is much higher than the resistance strain sensor.
同时研究了基于索力监测的光纤光栅传感器及电阻应变传感器的基本原理及监测误差分析。
At the same time, study on the basic principles and error analysis of Fiber Bragg Grating Sensors and Resistance Strain Sensors based on the monitoring of the cable forces.
该传感器经过激光微调,以实现高精度量程、偏移校准和温度补偿,并在每个芯片上集成了应变片和薄膜电阻网络。
The sensor is laser trimmed for precise span, offset calibration and temperature compensation. Also includes a strain gauge and thin film resistor network integrated on each chip.
本装置由电阻应变式压力传感器和二次仪表组成,已与计算机联调使用。
The device is composed of a pressure sensor and a secondary instrument. It has been put into use in connection with a computer for data collection and processing.
本实用新型涉及一种三柱变截面数字式传感器,属于测力与称重技术领域,尤其是指一种电阻应变式传感器。
The utility model relates to a three-post variable cross-section digital sensor belonging to a technical field of measuring force and weighing, in particular to a resistive strain gauge transducer.
本实用新型涉及一种三柱变截面数字式传感器,属于测力与称重技术领域,尤其是指一种电阻应变式传感器。
The utility model relates to a three-post variable cross-section digital sensor belonging to a technical field of measuring force and weighing, in particular to a resistive strain gauge transducer.
应用推荐