简述箔式电阻应变计用应变电阻合金的性能要求、种类、应用以及工艺特点。
An overview of the features of strain resistance alloy for foil strain gauge in property, composition, application and process is introduced.
加热元件的由高电阻合金丝绕制成螺旋状，安置在炉膛二侧，炉底后墙及炉门上。
The heating element is screwed up by high resistance alloy wires and installed on the hearth's two sides, the rear wall of the furnace bottom and the furnace door.
本文简述了电阻箱用中电阻合金的使用环境和要求，并对研制材料的特性进行了实验分析。
This paper has summarily discussed the serviced environment, and requirment of medium - resistance alloys used for resistance box and experimentally analyzed the properties of studied alloy.
在极低的温度下，某些金属和合金失去其对电流的电阻变成超导体。
At extremely low temperatures, some metals and alloys lose their resistance to electrical current and become superconductive.
本文通过对电阻点焊电极电压动态特性的分析，研究了低碳钢及低合金高强度钢电阻点焊的质量问题。
The quality of resistance spot welding of low carbon steel and high strength low alloy steel is studied by looking into the dynamic voltage characteristics of the electrodes.
采用计算机模拟的方法来研究银钨合金的电极材料中两者比例及气孔率对电阻率的影响。
The influence of the ratio of Alg, W component and porosity upon the resistivity of Ag - W electro - contact material were examined by the computer simulation approach .
针对铝合金的电阻点焊，研究了人工神经网络在点焊质量估测中的应用。
This paper discussed the application of artificial neural network at the resistance spot welding of aluminum alloy.
研究方法和主要成果如下：使用电阻炉熔炼a356铝合金，并采用斜坡冷却法进行半固态熔体的制备。
Research method and main results is as following: Using electrical resistance furnace and cooling slope to melt A356 aluminum alloy and gain the semi-solid slurry.
采用齐曼-费柏理论计算了不同组分比例下液态二元钠钾合金的电阻率。
In this paper, the specific resistance of liquid duality natrium Kalium alloy is calculated by using the theory of Ziman - Faber.
研究了电阻焊电极合金经93K低温处理后晶粒细化对高温屈服强度的影响。
The influence of resistance welding electrode alloy's grain refined after 93k cryogenic treatment to high temperature yield strength is studied in this paper.
阻性负载，功率因数为1 。采用特制合金电阻。
研究表明：随变形量的增加，合金丝的电阻率升高，上述热电势降低。
The study shows that the resistivity of alloyed wire raised and thermal potential reduced with the increase of deformation.
随退火温度升高，合金丝电阻率下降，热电势升高。
As the annealing temperature rises, the resistivity of alloyed wire reduced and thermal potential raised.
文中着重指出：合金系统结构因子的超结构峰对电阻率有重要贡献。
It is emphasized that the superstructure peaks in the structure factors of alloys would give a significant contribution to their phonon-induced electrical resistivity.
在圆柱形的瓷管上固定了两个引出端子，陶瓷管表面上缠绕了扁带波浪形状的合金电阻丝，并在其表面涂覆一层具有阻燃，耐高温特性的涂层。
Two terminal extensions are fixd on both ends of a ceramic tube on whose surface winds wave-shapcd alloy resistance wire and a high temperature-resistant and fireproof coating are applied.
根据计算流体力学与传热学原理，建立了描述铝合金电阻点焊液态熔核流动行为和传热过程的轴对称有限元模型。
Based on theories of computational fluid dynamics and heat transfer, an axial symmetry finite element model of velocity and temperature field of spot welding for aluminum alloy is established.
为高转矩、高转差率的电机转子找到了一种既满足电阻率要求，又具有好的铸造性能和好的力学性能的铝合金配方。
A new kind of aluminium alloy with satisfactory resistivity and good casting properties and good mechanical properties for motor rotors with high torque and high slip is found.
给出了非合金接触情况下，PNP型HBT基极比接触电阻和接触阻抗的解析计算方法和结果。
In this paper, we proposed a theoretical method and results for calculating special contact resistance and contact impedance of base contact of a PNP type HBT.
氧吸收或氧化对金属电阻膜、合金电阻膜及金属陶瓷膜的影响及作用机理差别很大。
The effects of oxygen absorption and oxidation on the resistor films of metal, alloy and cermet, and their operation mechanism are quite different.
铝合金电阻点焊技术是一项即将在汽车制造中获得广泛应用的技术，电极状况对焊接质量影响较大。
Resistance spot welding technology of aluminum alloy is to be applied widely to auto industry. Electrodecondition impacts heavily on spot welding quality.
这一现象的发现对我们今后在集成电路镍铬合金薄膜电阻的设计优化方面具有较高的参考意义。
In the process of manufacturing Ni-Cr alloy filmresistances of IC by using magnetronic sputtering, the film resistive property has been found having a regular change after annealing process.
利用箱式电阻炉、自行研制的高精度程序控制深冷箱对比，研究了热处理工艺和深冷处理工艺对2a11铝合金样品尺寸稳定性的影响。
The effects of heat treatment and cryogenic treatment on dimensional stability of al alloy 2a11 were studied using a box-type electrical resistance furnace and a cryogenic box with program control.
利用电阻炉加热，采用电子显微镜及图象分析仪，研究了近液相线铸造a 356铝合金在二次加热过程中的组织变化。
Using resistance furnace, the structure of A356 aluminum alloy casted by nearby liquidus semi-continuous was studied during remelting by means of electron microscope and image analysis apparatus.
介绍了电阻焊电极用铜合金材料的研究进展，分析了目前各种电阻焊电极用铜合金材料的性能特点；
The research advances of copper-base alloys being used for resistance welding electrode are introduced and function characteristics of different electrode are analyzed.
针对铝合金腐蚀平均速率与瞬时速率的差异，根据腐蚀过程中试样横截面的变化与欧姆电阻的对应关系，建立了新的腐蚀速率计算方法。
Based on the relationship between cross section variety and resistance of sample, a new formula was put forward to calculate the instantaneous corrosion rate of aluminum alloy.
采用集成基于事例推理，模糊推理，模糊神经网络(FNN)等多种人工智能推理技术，建立了铝合金电阻点焊工艺参数设计系统。
A process parameters design system of resistance spot welding of aluminum alloys integrating case based reasoning, fuzzy inference and fuzzy neutral network (FNN) was developed.
由激光合金化获得的接触电阻率可与热合金化的最佳值相比。
The specific contactresistances achieved by laser irradiation can be compared with the best results obtained by thermal alloying.
铝合金电阻点焊过程机理的研究是解决铝合金点焊问题的基础和关键。
The process mechanism of aluminum alloy RSW is the base and key to solve the problem of spot welding.
【中英文摘要】本文介绍了电热合金电阻随温度变化的试验方法。
The test method for change of resistance with temperature of metallic materials for electrical heating was given in this paper.
采用试验和有限元分析相结合的方法，考察了锻压力对铝合金电阻点焊接头中残余应力和接头疲劳行为的影响。
Using experimental and finite element analysis methods, the effects of electrode forging force are investigated on residual stress and fatigue behavior of spot welded aluminum alloy joints.
应用推荐