扫描电镜分析表明，膜的表面平整，无裂纹。
SEM micrographs showed that the films were smooth and crack-free.
用透射电镜分析了这两种复合材料的界面结构。
进行了红外光谱和扫描电镜分析和沥青基本指标试验。
The analysis of infrared spectrum and scan electricity mirror and asphalt basic index experiment were made.
通过电镜分析表明合成产物对金属有较好的缓蚀效果。
Corrosion inhibitory properties of the compound were studied by SEM analysis.
扫描电镜分析表明：获得的薄膜在硅基片上是光滑和致密的。
SEM studies show that on the wafer substrate, the film is smooth and dense.
使用X射线衍射和透射电镜分析，表明异质结是c轴取向外延生长。
X-ray diffraction and transmission electron microscopy establish that LCCO grew epitaxially inc-axis orientation on LCMO.
扫描电镜分析结果表明，在可见金及显微金周围容易发现次显微金。
Around the visible gold and microscopic gold particles submicroscopic gold can usually be found under a SEM.
应用电镜分析来检查软脑膜基底膜层的完整性和颗粒细胞的分化情况。
Electron microscopic analysis was conducted to examine the integrity of the pial basement membrane and granule neuron differentiation.
在扫描电镜分析中矿物表面出现的絮状物是无定形化物质的形象表现。
Floccule watched on the mineral surface in the analysis of SEM is live embodiment of amorphous substance.
分析包括结构强度分析、宏观断口分析、金相分析和扫描电镜分析等。
The failure analysis consisted of a strength analysis, a macro-fracture surface analysis, a metallurgical microscope and scanning electron microscope analysis.
构造岩透射电镜分析结果进一步证实了该断裂的存在并具深断裂的特征。
The result of TEM analysis of mylonites of the Guandian-Longwangjian fault has verified the existence of this fault and revealed its deep-fault features.
用扫描电镜分析等方法对氧化铝厂渣浆泵叶轮进行了腐蚀磨损失效分析。
The failure analysis of corrosion erosion for high chromium cast iron impeller of slag pulp pump in aluminum factory are conducted using SEM.
利用电镜分析、因子分析和聚类分析方法可以识别道路尘埃物质的污染源。
Pollution sources of road dust may be identified by means of electron microscope, factor analysis and cluster analysis.
对产品进行了X-射线衍射和电镜分析，并检测了在有机溶剂中的分散性。
The product was analyzed by using X-ray diffractometer and electronic microscope and the dispersity in organic solvents was determined.
用金相显微镜和扫描电镜分析方法，对DB685钢板表面裂纹进行分析。
The surface cracks on steel sheet DB685 was analyzed by metallographic microscope and scanning electron microscope.
扫描电镜分析表明，最佳配方上的差异与果实的表皮结构及涂膜的结构有关。
The SEM analysis show that this difference is due to the surface structures of the fruits and the structure of the coating films.
对叶片断口扫描电镜分析显示，断口具有准解理、韧窝、应力腐蚀等复杂特征。
Scanning electron microscopy analysis on blade fracture shows: the fracture is characterized by cleavage, quasi-cleavage and stress corrosion and so on.
此外，通过动态变形试件的扫描电镜分析，还研究了这类新材料的动态失效问题。
In addition, the dynamic failure characteristics are studied by means of SEM analyses for PUR syntactic foams specimens after loading.
应用SEM电镜分析和能谱分析等方法分析了热浸扩散渗铝层的成分、组织和形貌。
Using SEM with EDX analysis, the composition, microstructure and morphologies of the surface layer were analyzed.
采用场发射扫描电镜分析了复合镀层的表面和初始界面上的碳纳米管存在形式和分布。
Scanning electron microscope was used to observe the conformation and distribution of carbon nanotubes on the initial interface of coatings.
通过红外光谱和扫描电镜分析，接枝单体是依靠物理沉积和化学键作用与纤维结合的。
The IR spectrum and SEM analysis demonstrated that the graft monomers were bound to the fibers by the ways of physical deposition and chemical bonding.
电镜分析则表明SPI和KG的加入都可使鳙鱼鱼糜形成致密、均匀的凝胶网络结构。
Scanning electron microscopy indicated the addition of SPI and KG could make bighead surimi form firm and uniform gel network.
采用化学分析、金相分析以及扫描电镜分析等试验方法对某减震器连杆断口进行了分析。
The fracture of Piston rod of the absorber was analyzed by means of chemical composition analysis, microstructure examination and the scanning electron microscope (SEM).
对开裂的电厂水冷壁管进行了化学成分及金相组织分析，并对断口进行了扫描电镜分析。
The microstructure and chemical composition of cracked water-cooling wall pipe used in power plant were analyzed, and its fracture was analyzed by SEM.
用电子扫描电镜分析和探讨了铁矿粉在还原流化床中的粘结行为与金属铁析出形态的关系。
The relation of the sticking behaviour of fine iron ore with the separating morphology of metallic iron during reduction in a fluidized bed had been analyzed with scanning electron microscopy.
阎贺静等通过扫描电镜分析发现竹浆纤维横截面布满了孔洞。说明它具有优良的吸湿透气性。
Yan Hejing such analysis by scanning electron microscopy cross-section of bamboo fiber filled with holes, indicating that it has excellent moisture permeability.
扫描电镜分析表明：在相同的保温时间内，随正火温度的升高， 片层状珠光体越来越密集。
The result of SEM analysis shows that, within the same holding time, with normalizing temperature increasing, the layer-mesostructure is denser and denser.
催化剂的扫描电镜分析、侧压强度及抗拉强度测试证明，炭纤维使催化剂的机械强度明显提高。
Scanning electronic microscopy analysis, the side pressure and the tensile strength tests provided that mechanical strength of catalysts were obviously enhanced.
通过电镜分析，发现在马氏体基体上有一定数量的弥散的第二相存在是引起积屑瘤产生的冶金因素。
By electronic microscope analysis, it is found that there is a certain amount of second dispersed phase in the martensite matrix which is the metallurgical factor of forming built-up edge.
采用涂层断面金相、X射线衍射、扫描电镜分析方法，研究了涂层微观形貌、组织结构、组成成份。
With coat section metallographic, X-ray diffraction and scanning electrical mirror analysis method, have studied coat microscopic shape look, organization structure and the coating's composition.
应用推荐