并给出了 A/D转换器并行工作的实现框图和实用电路。
The A/D converter function chart and parallel converter circuit is given.
这个转换器是利用返驰式电路架构实现。
The circuit structure is using a fly-back converter voltage.
作为模拟电路与数字电路的接口电路，高性能的模数转换器对整个设计系统的实现非常重要。
As a special interface connected with analog and digital circuits, high performance analog-to-digital converter is much more important in whole system design.
采用湿敏元件HS1100/HS1101以及A/D转换器CC7107等常用元器件，设计了一款电路结构简单而且成本低廉的数字显示湿度测量仪。
Using the HS1100/HS1101 capacitive humidity cell and the A/D converter CC7107 etc, this article designed a low cost and digital-displayed humidity measurer.
本人在毕业设计期间参加了CMOS图像传感器系统架构设计和从感光电路到模数转换器的整个模拟链的设计工作。
During my graduate design term, I have taken part in design of CMOS image sensor system and analog chain from pixel to analog to digital convertor.
为了降低流水线模数转换器中数字校准电路的规模和功耗，提出了一种新的基于信号统计规律的后台数字校准技术。
To reduce the power dissipation and chip size of digital calibration circuits of pipelined analog-to-digital converter (ADC), a new statistics-based background calibration technique is presented.
另外一个SEPIC转换器的优点是几乎任何一个低端调节器或者控制器都可以被设置成为一个毋需反偏或测平移动电路的SEPIC。
A further advantage of SEPIC converters is that almost any low-side regulator or controller can be configured as a SEPIC without the need of polarity inversion or level shift circuitry.
为了从接收到的PCM码中还原出原始信号，阐述了一种由硬件实现帧同步，由串并转换器完成PCM码解调器的高速PCM码解调器电路。
This paper presents a high speed PCM demodulation circuit through which the serial parallel converter plays a role of demodulating and the hardware realizes frame synchronization.
本文介绍一种井中水温监测仪，其采用PN结温度传感器作为感温元件，用集成电路ICL7126等作A/D转换器。
This paper presents a well water temperature monitor, and its use of PN junction temperature sensor as temperature components, integrated circuits used for ICL7126 and other A / D converter.
本文给出一种用于降压型DC-DC转换器的自调节型斜坡补偿电路。
This paper gives a design of self-regulation slope compensation circuit applied to buck DC-DC converters.
提出了一种应用于电流型DC - DC转换器的自适应斜坡补偿电路。
An adaptive slope compensation circuit used in current mode DC-DC converters is presented.
介绍了电荷平衡式电压频率转换器的电路设计与工艺制作，并给出了研究结果。
A charge balanced voltage to frequency converter is jpresented in this paper, and the circuit design and the process technology are also described.
在这些系统的心脏，升压转换器把低电压高达有用的水平供电电路和超级电容器充电和电池。
At the heart of these systems, boost converters bring low voltages up to useful levels for powering circuits and charging supercapacitors and batteries.
介绍一种用于升压型DC - DC转换器的动态斜坡补偿电路。
A dynamic slope compensation circuit applied to boost DC-DC converters is introduced in this paper.
设计了一个用于流水线型模数转换器的低压采样保持电路。
A low supply voltage sample-and-hold circuit for a pipelined analog-to-digital converter is described.
设计电流模脉冲宽度调制直流转换器时，人们广泛采用斜坡补偿电路来消除谐波振荡。
In the design of current-mode PWM DC-DC converters, the slope compensation method is widely used to prevent sub-harmonic oscillation.
从软件和硬件两个方面设计了一种简单、实用的DSP与串行AD/DA转换器的接口电路。
This paper designs a simple and practical interface between serial AD/DA converter and DSP.
介绍节拍控制声光转换器的原理、电路设计和实现方法。
This paper introduced the principle, circuit design, and implementation method of the metre control acoustooptic transducer.
介绍一种针对正、余弦旋转变压器数字转换器（RDC）模块，用复杂可编程逻辑器件（CPLD）技术实现伺服轴角编码电路设计的方案。
This paper introduces the technology scheme to design radar servo shaft encoder circuit by using CPLD on the rotary transformer and RDC module.
转换器中的功率输入连接器有两个专门的告警电路接线，可以连接任何报警装置，例如PLC或者标灯。
The power input connector on the switch has two dedicated alarm circuit connections that can be wired to any warning device, such as a PLC or pilot light .
该电路在视频放大器、有源滤波器、高速数据转换器等电子系统中有着广泛的应用前景。
This circuit finds wide applications in video amplifiers, active filters, high speed data conversions and other electronic systems.
数模转换器、模拟集成滤波器、基准电压源和高驱动能力运放等电路是通信系统中不可缺少的基本电路。
Digital to analog converter, analog integrated filter, bandgap reference and high drive capability operational amplifier are indispensability basic circuit of communication system.
芯片内部主要包括数字控制器，显示数据存取器，DC - DC电压转换器，参考电流产生器，电压预充电路产生器，64个行驱动电路和132个列驱动电路。
It consists of a digital controller, SRAM for display data memory, a DC-DC voltage converter, reference current generators, a pre-charge voltage generator, 64 common drivers, and 132 segment drivers.
报导了一种利用多功能转换器产生的多种传感器线性化校正函数的原理及实现电路。
Linearization compensation funCtions of several transducers can be produced by means of the multifunction translator. And itS principle and executive circuit are reported.
接口电路又包括与主控制器的PCI接口，与A/D转换器的接口和与协处理器的接口（HPI）。
The interface circuits include the PCI interface of the master controller, the interface of A/D converter and interface (HPI ) of the association processor.
模数转换器是模拟电路和数字电路的接口，是手持终端中不可缺少的组成部分。
Analog to digital Converter is the interface of analog and digital circuit; it's an necessary part in the portable system.
转换器的分辨率决定着数据采集电路的量化精度。
The quantization precision of data acquisition circuit is determined by the A/D's resolution.
其二，给出了通信转换器的硬件电路的设计和实现方法，通信转换器采用PIC18F248为主控制器，实现通信接口从RS232到CAN的转换。
Second, provide the design and implementation method of the hardware of communication converter. Adopts PIC18F248 as the master controller, realize the interface conversion between RS232 and CAN.
其二，给出了通信转换器的硬件电路的设计和实现方法，通信转换器采用PIC18F248为主控制器，实现通信接口从RS232到CAN的转换。
Second, provide the design and implementation method of the hardware of communication converter. Adopts PIC18F248 as the master controller, realize the interface conversion between RS232 and CAN.
应用推荐