该文采用等效电路法研究了容栅传感器的数学模型。
This paper uses the equivalent-circuit way to study the mathematical model of capacitive grate transducer.
所得到的结果与一般的等效电路法获得的结果完全一致。
The results are agreement with that obtained from general equivalent circuit method.
本文用等效电路法对五臂混合环进行了分析，并得出两种改进方案。
Analysis by the use of equivalent circuit method is made for the five-arm ring, and two ways to improve it are found.
多谐振腔宽带换能器的理论分析采用经典等效电路法与有限元法相结合的方式。
Equivalent circuit method and finite element method have been studied for theoretical analysis of the resonator transducer.
本文通过三种负反馈类型的具体例子同时介绍了两种分析方法，即方框图法和等效电路法。
In this paper, two methods of analysis, the block diagram method and the equivalent circuit method, have been introduced simultaneously with specific examples of three negative feedback types.
文中采用等效电路法计算了单交叉梯形慢波电路的匹配特性。计算结果与实验测量基本一致。
Matching characteristics of single staggered ladder slow wave circuit are calculated by eguavelent circuit method in the paper.
采用电化学阻抗法研究支撑液膜膜液的流失行为，并采用等效电路法分析得到的交流阻抗图谱。
The losing behavior of liquid in supported liquid membranes (SLMs) was studied by electrochemical impedance spectroscopy (EIS) method in this paper.
针对高损耗衬底，基于复镜像理论，结合部分元等效电路法，建立了一种新的片上互连线物理模型。
A new physical model for on-chip interconnect on high lossy substrate is proposed based on complex image theory and PEEC.
应用微变等效电路法，对具有同型和异型结构的两类复合管的电路特性，进行了比较系统的分析和研究；
The micro-variation equivalent circuit method is used to analyse and study the circuit features of the multiple unit tubes with the isomorphous or heterogeneous structure systematically.
本文将故障验证技术中的伪电路法和支路诊断法结合起来，提出了线性模拟电路故障诊断的分组诊断法。
Based on the methods of pseudo circuit and branch diagnosis, a grouping diagnosis for the fault in a linear analog circuit is proposed.
用这种方法获得的SPWM信号的稳定性和精确性优于用模拟电路法和专用集成电路产生的SPWM信号。
The SPWM signal generated by the method has better stability and accuracy than the analogy circuit and special IC.
以日本神钢电机公司制造的PM型（永久磁铁型）SLPMU-025A为样机，利用等效电路法对其效率特性进行了解析计算。
Taking PM type(the permanent magnet model) SLPMU -025A motor as an example , this paper makes analytical calculation of its efficiency characteristics by the means of equivalent circuit.
本文给出了一种高压直流换流器的暂态数学模型——等值电路法(ecm)。这种方法以简单、明晰的方式描述了换流器阀的所有可能的导通模式。
This paper presents a transient mathematical model of the HVDC converters-Equivalent Circuit Method (ECM), which can describe all possible states of converter valves in a simple and explicit way.
针对磁通门传感器检测到的环境磁场强度信号，运用谐波选择法，设计了磁通门信号处理电路。
This paper adopts harmonic choice method to design fluxgate signal processing circuit in allusion to the environment magnetic field strength signal of fluxgate sensor detecting.
本文介绍了不接触电极法测量的工作原理，测量中所需的发射信号的波形以及产生发射信号的电路。
This article introduces the work principle of untouched electrode method exploration, wave of transmit signal needed in exploration and circuit that generate transmit signal.
应用拉格朗日乘数法，将空闲时间分布到数据通路的各个操作节点上，从而有效地降低了设计电路的能耗。
By means of Lagrange multiplier method, this method distributes the slack to the operator nodes in the data path, thus, efficiently reduces the energy consumption of design circuit.
本文介绍了一种将MOS电路级描述转换成逻辑级描述的统一方法。
An unified method for converting MOS circuit level description into logic level description is presented.
本文详细的论述了依据正交相位检测法提取多普勒频移信号的方法，并对各部分实现电路作一简要的介绍。
This paper has discussed the way of probing Doppler shift signal based on crossed phase detecting method in detail and introduced each function circuits briefly.
该法以电路的改进节点方程为基础，具有建立故障诊断方程容易，所建立的方程具有较低的非线性度及规则的雅可比矩阵的特点。
This method based on modified nodal approach is easy to set up the fault diagnosis equations and has lower degree of nonlinearity and regular Jacobi matrix form.
本文利用非线性电路的非线性性质和替代原理，提出一种新的非线性电阻电路参数识别法。
A new method is proposed to identify the parameters of a nonlinear resistive circuit by making use of the nonlinearity of circuits and by the substitution theorem.
在此基础上运用数值反拉普拉斯变换(nilt)法分析互连电路的时域响应。
Then the numerical inversion of Laplace transform (NILT) is employed for the time domain response of the interconnect circuits.
本文讨论了电气化铁道牵引回流对轨道电路干扰的测试力法。
This paper discusses the analysis method on measuring and testing the railway electrification interference to track circuits.
环鸣测量声速法具有电路简单、使用方便、测量精度高等优点，已广泛地应用。
Sing-around method for sound velocity measurement have found wide acceptance because it is simple in circuitry and high in accuracy.
本文运用故障树分析法对模拟电路进行分析，按照电路结构对其按树枝形逐级划分建立故障集；
Fault tree analysis for analyzing analog circuits structure is proposed in this paper, in which fault sets are established according to tree architecture.
该算法利用电路模型法得到低频下若干频率的电感、电阻值；
The coupled circuit method is used to calculate resistances and inductances in the low frequency range.
本文提出一种模拟电路故障诊断法。
提出了一种新的同构判定算法：电路模拟法，即将图的同构问题转化为电路的相同问题。
A novel method, the circuit simulation algorithm, is proposed here, which transfers the graph isomorphism problem into the identical circuits problem.
提出了一种新的同构判定算法：电路模拟法，即将图的同构问题转化为电路的相同问题。
A novel method, the circuit simulation algorithm, is proposed here, which transfers the graph isomorphism problem into the identical circuits problem.
应用推荐