该电路模式结构简单且功耗低。
本发明阐述用于支持紧急电路模式呼叫的技术。
Techniques to support emergency circuit-mode calls are described.
SSCS的目的在于传递由语音、语音带宽数据或电路模式数据构成的窄带呼叫。
The purpose of the SSCS is to convey narrow-band calls consisting of voice, voiceband data, or circuit mode data.
所述ue与PSAP通信以进行所述紧急电路模式呼叫，所述PSAP可基于所述位置估计而选择。
The UE communicates with a PSAP, which may be selected based on the position estimate, for the emergency circuit-mode call.
ATM技术综合了电路模式和分组模式的优点，为各种业务的综合接入和信息的高速传输提供了技术基础。
The ATM synthesize the advantage of circuit mode and package mode and base technology foundation for synthetic access of various multimedia service and high transport of information.
在所述电路模式呼叫期间，所述ue与所述定位服务器一起实施用户平面定位以获得所述ue的位置估计。
The UE performs user plane location with the location server during the circuit-mode call to obtain a position estimate for the UE.
这种类型的故障让人不安，因为没有什么共用的电路可以轻易解释这些故障模式——即只有一个机箱部位引起的故障。
The pattern was disconcerting because of the lack of common circuitry that could easily explain the pattern of such failures—a single box that could be blamed.
研究人员可以在钠β-氧化铝处于液态时对它进行操作, 这样就很容易将它精确地涂抹在物体表面, 而这正是印刷电路板所要求的工艺模式.
The researchers worked with sodium beta-alumina in its liquid form, which enabled them to spread it easily onto a surface in precisely the pattern required for a printed circuit.
在集成电路(404)的测试过程中，它在晶片测试模式下通信。
During the testing of the integrated circuit (404), it communicates in the wafer test mode.
详细介绍了传感器的结构、工作原理、工作模式的选择以及信号检测电路。
Details of the sensor's structure, its working principle, the selection of working mode as well as the signal processing circuit is presented.
将静电计置于电压模式，然后打开外部反馈，就把反馈电路从内部网络切换到连在前置放大器输出端的外部反馈网络上。
Placing the electrometer in the volts mode and then enabling external feedback switches the feedback circuit from an internal network to a feedback circuit connected to the preamp output.
本文使用双电流控制模式，以智能芯片uc 3842为核心，设计了单片开关电源的实用电路。
In this paper, by the use of dual-current control mode and intelligent UC3842 chip as the core, a single-chip switching power supply circuit are presented.
本文从双向负阻晶体管(BNRT)的等效电路出发，导出了BNRT的工作模式。
In this paper, the operation modes of the BNRT have been derived from its equivalent circuit.
CPU包含成千上万个晶体管和逻辑电路，它们被封装在一个很小的设计空间模式，称为集成电路(IC)。
The CPU contains thousands of transistors and logic circuits packaged in a very small design known as an integrated circuit (IC).
常用电路保护器件的主要失效模式为短路，瞬变电压抑制器（TVS）亦不例外。
The primary failure mode of commomly used circuit protective devices is short-circuit, and so is TVS (Transient Voltage Suppressor) .
针对CMOS有源像素传感器，提出一种降低固定模式噪声(FPN)的列读出电路。
A column readout circuit to reduce fixed pattern noise (FPN) for CMOS active pixel sensor images is presented.
文中详细分析了电感电流准连续模式的有源功率因数预校正电路的工作原理。
The principle of active power factor correction circuit operated in critical inductor current mode is analyzed in this paper in detail.
为使打印机工作于电池供电的便携模式，设计了高效率电源管理电路。
To make the printer work in portable model with battery-powered, a high-efficiency power management circuits is designed.
同时电路工作于闭环模式，具有稳定的工作特性。
And the circuit works in the model of close-loop which ensure its steady performance.
文中画出了运行逻辑控制系统的电路原理图，并附有该工作模式下的基本运行控制程序。
This text draws the schematic circuit diagram of operating logic control system, and attaches basic operation control program under this working model.
本文分析了康佳T2988型画中画大屏幕彩电电源保护电路的保护模式和工作原理。
This paper has analyzed the protective mode and the working principles of the power-protective circuit in the large-screen KONKA color TV Model T2988.
介绍了临界模式功率因数校正电路的工作原理和特点。
The working principle and characteristic of the Boost power factor correction (PFC) circuit operating in critical conduction mode are investigated.
本课程将介绍机械与电路等系统的模式，利用拉氏转换决定步阶，斜坡及脉冲等输入的响应。
It will introduce the responses of the step, ramp and impulse input for mechanical and circuit systems by using Laplace transform.
本文详细介绍了基于F PGA的呼吸机SPONT 模式控制芯片的设计和实现，包括原理和电路结构图。
This paper introduces in detail the design and implementation of ventilator SPONT control chip based on FPGA, including principle and electric circuit.
本文介绍了一种基于MSP430系列单片机的智能洁具控制系统，论述了该系统的控制模式、电路硬件组成以及系统软件设计。
This paper, a Design of the control System for Intelligent Sanitation Based on MSP430 Microcontroller is presented, and the control mode, hardware and software are adopted.
传统电压控制模式的电机驱动电路系统频率都受电机的本征频率制约，其相位延迟会随负载的变化而变化。
The system bandwidth of conventional voltage-control-mode motor driver circuits is limited by the intrinsic frequency of the load, and its phase lag is also load-dependent.
近年来对于电压模式驱动电路的研究也逐渐增多，在J。
Recently there are more researches for voltage-programmed pixel circuits (CPPCs) . In the paper of J.
介绍热敏开关的工作原理、结构形式、常见缺陷模式、解决措施，分析热敏开关相关电路和常见故障的查找过程。
The principle, structure, common troubles, solving fault about thermo-switch are introduced and thermo-switch related circuit diagram as well as general inspecting flow for failures are analyzed.
介绍热敏开关的工作原理、结构形式、常见缺陷模式、解决措施，分析热敏开关相关电路和常见故障的查找过程。
The principle, structure, common troubles, solving fault about thermo-switch are introduced and thermo-switch related circuit diagram as well as general inspecting flow for failures are analyzed.
应用推荐