详细描述了硬件电路构成。
较详细地叙述了系统硬件电路构成和软件编制思路。
The system hardware circuity and software programming concept are presented in detail.
介绍了该仪器的基本设计原理、电路构成及其应用效果。
The paper describes the basic design principle and the circuit constitution of the instrument as well as its application effects.
核信号处理电路主要由线性放大器和脉冲成形电路构成。
Nuclear signal processing circuit mainly consists of linear amplifier and pulse shaped-circuit.
本文给出了一种由中小规模集成电路构成的数字给定电路。
In this paper, a digital specified circuit made by middle and small size Integrated Circuits is proposed.
信号报警显示部分由零序电压检测、报警、显示等电路构成。
The latter makes use of zero sequence voltage detection, alarm and display circuit.
介绍了采用IGBT逆变电路的高压脉冲电源的设计和电路构成。
This paper presented an IGBT inverter for high voltage pulse source.
FPGA功能测试平台由配置电路、电源电路和I/O接口电路构成。
FPGA functional test platform is composed of configuration circuit, a power circuit and I/O interface circuit.
故障通知电路由表示灯和音响电路构成，一旦电路故障就可自动告警。
The accident noticing circuit is composed of an indication lamp and a sound circuit, and can automatically give the alarm when the circuit has accidents.
论述了无需直流辅助电源、用厚膜电路构成的静态型电流和电压继电器。
The static current and voltage relays made of solid state circuit and without DC auxiliary supply are presented.
本研究主要包括应用硬件电路构成的心电信号的采集系统和R波同步检测。
This research is mainly composed of two parts: one is the electrocardiosignal collection system composed of hardware circuit while the other is the R-wave synchronized detection.
设计了一种由两级升压触发电路及变频式直流电源电路构成的氙灯安定器。
A kind of xenon lamps stabilizer is designed which is made up of the tripper-circuit with two-leveled rising voltage and the direct current power circuit with frequency conversion mode.
本文介绍了一种用通用集成电路构成的结构简单、工作可靠的水位水温控制器。
There is a introduce for a new kind of water level and water temperature controller, it is using general integrate circuit and it is sample and work dependable.
设计了以DSP为控制器、集成电路构成高速滞环电流比较器的电机调速系统。
The motor speed driving system USES DSP as controller and USES high-frequency delay-loop current comparator composed of integrated circuit.
设计了一种利用单脉冲正向峰值探测电路构成的CCD二值化阈值自动调节方法。
A kind of automatic adjustment method of CCD binary threshold was designed, which is based on the peak detection circuit of positive single pulse.
送丝调速系统由功率MOSFET开关控制电路、脉宽调制电路及控制电路构成。
The wire feeder timing system consists of MOSFET switch control circuit, PWM circuit and control circuit.
磁芯采用高频脉冲电流励磁，信号处理电路由峰值检波、低通滤波及差动电路构成。
The toroidal core was excited by sharp pulse current. The sensor circuit is composed of peak value detector, Butterworth low-pass filter and differential amplifier.
提出了一种由斩波电路与全桥逆变电路构成的电压型大功率晶闸管全桥逆变主电路。
A voltage type high power invert circuit which is composed of chopper and thyristor full bridge invertor is proposed.
电路主要由周期计时电路、周期数据预置电路、运算电路及时钟和时序等电路构成。
This circuit is implemented on a monolithic chip, which is comprised of a period time sampling unit, a peri-od distanee preset unit, an arithmetic unit, a clock and time sequence unit.
音量控制电路由编程开关、电脑存储放大执行电路构成，可实现报警音量自动控制；
The volume control circuit is composed of a programming switch and a computer storing magnifying executive circuit, and can realize the automatic alarming volume control.
预处理器主要有延迟单元、乘法器和窄带滤波电路构成，可以从NRZ数据中得到时钟信号。
The preprocessor can extract clock information from NRZ data stream, which consists of a delay cell, a multiplier and a narrow-band filter.
交替互补定位器由D型触发器和通用门电路构成，它被证明为是一个完全故障定位的定位器。
The alternating-complementary locator is constructed by D-flip-flops and gate circuits. It is proved that it is totally fault locating.
推导并建立了陀螺系统和伺服执行机构的实物仿真模型，使之与角跟踪电路构成闭合控制回路。
Practical simulating models are deduced and built for the gyro system and the performing setting of the servo system to consist a close-control loop with angle-tracing circuit.
该系统以可控硅三相桥式全控整流电路构成系统的主电路，采用同步信号为锯齿波的触发电路。
The thyristor triphase-bridge full controllable rectification circuit is taken as main circuit of the system and the trigger circuit with saw-tooth synchronism signal is adopted.
所述仪器由大规模集成电路构成，集数字颇率与函数发生器于一体，具有与同类仪器不同的特点。
The instrumentation is incorporated a digital cymometer and a function generator, which consists of massive integrated circuits characterized by its unique features.
介绍了一种主要由8051单片机、MAX7219驱动的LED数码显示电路构成的相位差测量仪。
A new instrument which can measure the phase difference by 8051 microcontroller and LED digital display current driven by MAX7219 is introduced.
基于MR阻尼器的半主动悬架系统主要由MR 阻尼器、弹簧、传感器、控制器及相关辅助电路构成。
In general, a semiactive suspension system based on MR dampersmainly comprises MR dampers, springs, dynamic sensors, semiactive controller andrequired circuits.
叙述了一种新型的由集成电路构成的线性触发器，该触发器用于在电源频率可变条件下工作的整流电路。
A new kind of linear trigger circuit made up of integrated circuit is described. The trigger circuit is used in rectification circuit under the condition of the variable frequency of power source.
本系统由FPGA、单片机控制模块、键盘、LCD液晶显示屏、DAC输出电路和末级放大电路构成。
Abstrat: This system is composed by FPGA, MCU controller, keyboard, LCD, DAC and amplifier modules.
利用简单的电路构成实时相位检测器，对干涉信号中的相位信号进行同步检测，最终获得实际振动的振幅频率。
The real time phase detector is constructed with a simple circuits. The amplitude and frequency of the vibrations are measured by synchronously detecting the phases in interference signal.
应用推荐