该集成电路可以连续操作，让仪器能测量如温度、振动、压力、位置、曲度和张力等参数。
The circuits can operate continuously, and enable instrumentation for measuring parameters such as temperature, vibration, pressure, positioning, inclination and strain.
方法和电路都具有独特的优点，特别适于阻抗传感器的参数测量。
The method and measuring circuit have good characteristic, Which fitting in particularly measuring the parameter of impedance transducer.
文中对两种时间参数和数字化测量进行了探讨，并详细分析了核心电路的工作过程。
In this paper, the digital measurement of two kinds of time parameters is discussed. Then, the working process of key circuit is analyzed in detail.
给出了BNRT的直流参数以及高频和脉冲性能的测量结果，提出了BNRT组合运用的基本电路。
The DC parameters and measurement results of high-frequency and pulse performances for the BNRT are given Basic circuits with regard to the composite operation of BNRT's are presented.
一种压差式呼吸力学参数测量系统的硬件电路。
This article introduces a measurement circuit for Respiratory Mechanics Parameters which is based on differential pressure sensor.
给出了系统总体结构、模拟通道设计、倍频锁相电路、数据采集电路、各种电参数测量算法及系统软硬件抗干扰措施。
The system hardware structure, analog channels circuits, data acquisition circuits, measurement algorithms of electric parameters and anti-jamming methods are given.
本文提出了一种减少混沌测量电路参数漂移的新方法。
An improved method of chaotic measurement to reduce the drift of parameter is presented in the paper.
结合对数放大器自身的特性，介绍了此电路在BPM系统中的组成，工作原理，试验结果和参数的测量方法。
According to log amplifier's characters, we introduce the structure, principal, experiment results and measurement of the parameters of the circuit in BPM.
并测量了与激光器输出特性相关的电路参数，为该激光光源性能的进一步优化提供了依据。
Then the circuit parameters related to the output characters of the laser were measured to supply the gist of the further optimization of the laser source.
结合激光器的等效电路和速率方程分析，避免了单独测量寄生网络和估计有源区电路参数。
The advantage of this method lies in that there is no need to measure the parasitic network separately and estimate the circuit parameters of active region.
传统上对模拟电路的测试采用的是直接功能测试，即直接测量电路的性能参数Z。
Traditionally, the analog circuit is tested by explicit functional testing: directly measured its performance parameter set Z.
本文设计了该整流器的主电路参数，驱动电路，测量电路等硬件，提出了软件实现的完整方案。
The design contains the main circuit parameters of the rectifier, drive circuit, measuring circuit and other hardware, and a full software program.
建构了电路板锡膏的三维测量系统，实现了印刷锡膏均匀性参数的获取，从而达到对表面贴装质量进行监控和评价的目的。
The uniformity parameters of solder paste can be extracted by this system, which is competent for the quality control of surface mount technology (SMT) product line.
本文主要介绍了印制电路板组装件焊接后非ods清洗剂清洗质量表征参数的测量方法。
The measurement method of the characteristic parameters of the cleaning quality about welded printed circuit board assembly cleaned by non-ODS cleaner is introduced in this paper.
参数测量部分的设计包括传感器的选型，变送电路的设计和采集结果的测量。
In the parameters measurement part, the design is mainly made up of three parts such as sensors select, sensors circuit designs, experiment measurement.
纱线直径是检测纱线质量的一个重要参数。本文介绍了应用CCD传感器组成测量纱线直径的测试系统的结构、工作原理、检测电路系统及微机系统。
In this paper, we have introduced the structure and operation principle of CCD Transducer System in the measurement yarn diameter. The test Circuit and Microcomputer COntrol is given.
详细介绍了以PSD为传感元件的石英摆片综合参数测试系统的测量原理、光路和电路。
The structure, measurement principles and hardware of the application system of PSD are introduced in detail.
运用广义反射系数概念可以测量单端口、二端口元件的本征参数及电路参数。
The concept of the generalized reflection coefficient can be used to measure the intrinsic parameters and the circuit parameters of the one-port and two-port elements.
研制了一种新型气象参数测量仪器，介绍了仪器的组成及功能、电路工作原理、软件设计、测试结果等。
A new kind of instrument for weather measurement is designed. And its constitution, function, electric circuit working principle, software design and test result are reported.
基于该方法设计了柱体直径测量仪，分析了数据采集电路中LVDT传感器与LVDT信号调理芯片AD698的接口电路，以及相关参数的确定方法。
The design of interface circuit between LVDT sensor and AD698 in data sample circuit, and method of calculating some parameter were analysed.
三相电测量采用交流采样技术，软件算法采用快速傅里叶变换fft，全面克服了以前的三相电参数测量方法普遍存在的实现电路复杂以及在功能和精度上的不足。
The method measuring electrical parameters is based on ac sample technology, the FFT way is used in software design, so the design of circuit, the function and the accuracy is fully improved.
采用通用的电气参数采集测量方法，设计了采集系统，介绍了利用各种变换处理电路和单片机组成的电气参数智能采集传输系统框图。
The com mon acquisition and measuring method of electrical parameters is adopted, acquisition system is designed, and the systematic block diagram is also introduced.
在此基础上，重点研究了液晶电视特性参数综合测量系统的硬件设计，包括整个机械部分的设计及部件选择，机电控制部分的控制方案及电路设计。
In system designing, this dissertation introduces the mechanism of system design, and designed the system hardware parts, including the mech-electronic control parts and the related circuits.
新型取样式五参数过环空找水仪由温度、压力、磁定位、遥测电路和流量、持水率2个功能短节组成，采用流体取样室开伞集流、收伞取样的方式测量持水率。
A flow-concentrating-sampling annular water detector with 5-parameter consists of circuits of temperature, pressure, magnetic locator, telemetry, as well as 2 cartridges of flow rate and water cut.
屏蔽层的电压Vs (t)既可以根据电路理论计算，也可以按照所给出的参数先搭电路，再精确测量来获得。
The shield voltage, Vs (t), can be solved for by conventional circuit analysis techniques, or simulated by actually building and carefully making measurements on a circuit with the given parameters.
在此基础上，可望开发出新型高精度或快速(实时)电功率测量仪器，也可开发出能够同时测量多种电路参数的综合测量仪器。
It is expected that new high accurate or high speed (real-time) electrical power measuring instruments can be designed based on this approach. Besides, t...
在此基础上，可望开发出新型高精度或快速(实时)电功率测量仪器，也可开发出能够同时测量多种电路参数的综合测量仪器。
It is expected that new high accurate or high speed (real-time) electrical power measuring instruments can be designed based on this approach. Besides, t...
应用推荐