双语课程：电路分析基础、信号与系统。
Bilingual Courses: Introductory Circuit Analysis, Signal and System.
在这基础上提出了本文具体的主电路形式并作了详细分析。
On the base of it, we introduce and analyze our design scheme.
在分析本方案原理的基础上，给出了方案实现的硬件电路组成及软件流程。
After analyzing the principle of this method, the structure of the circuitry and the software control flow was presented.
在分析研究三绕组配电变压器等效电路的基础上，介绍了三绕组配电变压器阻抗及等效电路参数的工程计算方法。
Based upon the analysis of an equivalent circuit for distribution transformer with three windings, an engineering calculation method for the reactance and parameters of this transformer is introduced.
电路与器件的模型是进行分析设计的基础。
Circuits and devices 'model is the basis of analysis and design.
本文首先在分析传统的设计方法学的基础上，提出了一种基于宏单元的异步集成电路设计方法学。
In this paper, the asynchronous integrated circuit design methodology based on macro cell is presented first, based on the analysis of traditional design methodologies.
应用此模型，既能有效方便地研究分析界面特性对电子迁移率的影响，又为将来的电路模拟打下了基础。
The model can be used to study and analyze influences of interface characteristics on electron mobility and is also a basis of circuit simulations in the future.
本文在分析LR电路过渡过程的基础上，讨论了以特定激励源实现变压器绕组电阻零时间常数测量的方法。
On basis of LR circuit transition process analysis, the paper describes measuring method of zero time factor for transformer wire-wound resistor with specific exciting supply.
在分析现有模拟电路多频灵敏度故障诊断方法的基础上，提出一种新的测试频率范围的选择方法，即灵敏度矩阵分析方法。
After analyzing current fault diagnosis methods based on multi-frequency sensitivity in analog circuits, a new sensitivity matrix analysis approach is presented to select testing frequency.
对介质加载圆柱谐振腔进行严格分析是进行微波电路设计和微波介电测试的基础。
Rigorous analysis of dielectric-loaded cylindrical resonant cavity is the basis of microwave circuit design and microwave dielectric measurement.
在分析磁通门常用背景磁场补偿方法基础上，提出一种新的采样保持电路自动补偿方法。
On the basis of analyzing the common methods of background magnetic field compensation, a new automatic compensation method based on sample and hold circuit is put forward.
单根与耦合微带线的分析与综合是微波集成电路(MIC)设计的基础。
Microwave Integrated Circuits (MICs) design is based on the analysis and synthesis of the single microstrip line and the coupled microstrip lines.
这两种单电子电路模拟器已经为今后的大规模单电子系统的设计和分析建立了基础。
These two simulators have built up the foundation for the future design and analysis of the largescale single electron systems.
在能量叠加点火系电路分析的基础上，对其进行了匹配发动机的试验研究。
On the bases of the work of a superposed energy type ignition system and its circuits analysis, a series of experimental studies on the matched engine have been done.
在简要分析动物胡须的感知机理及其电路实现原理的基础上，着重介绍了国内外仿生胡须机器人的研究现状。
The whisker tactile mechanism of animals and the principle of its circuit implementation are briefly analyzed, and the research status of biomimetic whisker robots at home and abroad are introduced.
在分析空间电源系统电路结构和故障特征基础上，建立起基于模型在线故障诊断系统。
After analyzing the circuit structure and fault characteristics of the aircraft power system, the authors built an on-line model-based fault diagnosis system.
在此基础上对各模块电路进行了详细的理论分析与具体电路设计实现。
On this basis, it describes the circuit of the detailed theoretical analysis and the design of the modules.
在感应电动机等效电路的基础上，分析了当电源频率发生改变时，等值电路中主要参数的变化规律。
The principle of main parameter of the with the change of source frequency were given on the base of analyzing the equivalent circuit of induction motor.
本文对使用功率MOSFET元件的直流斩波电路进行了计算机辅助分析，在分析的基础上给出了工程设计方法。
DC chopping circuit with power MOSFET have been analyzed in the paper with the help of computer. On the basis of the analysis, a design method is given.
文中在对SN388交叉站电路进行分析的基础上，介绍了交叉站输入线故障、保护电路故障和转换电路故障的解决方法。
On the basis of analyzing circuit of SN388 cross-station, the paper introduced the solution of failure in input circuit, protected circuit and switching circuit of cross-station.
以电子管微变等效电路分析为基础，设计了一款以驱动高保真耳机为目的的耳机放大器。
Based on the analysis of vacuum tube slight variation equivalent circuit, a headphone amplifier is designed to drive high fidelity headphone.
在分析了SRAM逻辑结构中各子电路的泄漏功耗的产生机制的基础上，建立了SRAM的泄漏功耗模型，然后对SRAM的泄漏功耗进行估算。
After analyzing the producing mechanism of leakage power for each sub-circuit in SRAM, a leakage power model for each sub-circuit was established to estimate the leakage power for full SRAM.
以短路过程分析为基础，阐述了应用短路分流法保护时电路有关参数的选择原则；
Based on the analysis of short circuit process, the principle to select relevant parameters when applying short circuit shunting protection is introduced.
本文在分析MOSFET衬底电流原理的基础上，提出了一种新型抗热载流子退化效应的CMOS数字电路结构。
Based on analysis of the principle of substrate current of MOSFETs, a new hot carriers resistant structure of CMOS digital circuits is proposed.
在此基础上运用数值反拉普拉斯变换(nilt)法分析互连电路的时域响应。
Then the numerical inversion of Laplace transform (NILT) is employed for the time domain response of the interconnect circuits.
在深入分析目前晶闸管数字触发电路存在的主要问题的基础上，提出了一种新型晶闸管交流调压电路触发系统的设计方法。
A novel type trigger system in thyristor AC regulator was presented, which based the analysis on the main problem of presently digital trigger circuit for thyristor.
香农写于1938年的硕士论文，“继电器与开关电路的符号分析”，应用布尔代数建立现代数字电路的理论基础。
Shannon 's 1938 master's thesis, A Symbolic Analysis of Relay and Switching Circuits , used Boolean algebra to establish the theoretical basis of modern digital circuits.
《电工学》中电路参数的计算是电路分析与设计的基础。
Circuit parameter calculation in the book "Electrotechnics" is the basis of the circuit analysis and design.
在分析了各类比特泄漏电路的基础上，给出了一种依据事件的自适应比特泄漏电路，对电路的结构、原理进行了分析，给出了抖动特性的理论分析和实测结果。
On the basis of an analysis of various kinds of bit leaking circuits, an adaptive bit leaking circuit based on events is developed and the structure and principle of the circuit are discussed.
在分析传统引弧电路的基础上，提出了一种新型的高频引弧电路，并对其工作原理进行了分析。
A new kind of high frequency arc striking device was presented here based on the analysis of traditional arc striking circuits. The working principle of the device was analyzed.
应用推荐