分析了电解加工电极界面双电层的特殊性。
Special features of the binary electrical layers of the electrode interface in ECM were analyzed.
提出了一种电解加工工具阴极设计的新方法。
A new method of designing tool cathode in the electrochemical machining (ECM) is present in the paper.
题开展了微细电解加工技术的试验研究工作。
简要阐明了电解加工广义流场设计的主要内容。
The main design of electrochemical machining generalized flow field are briefly stated.
斩波器是实现脉冲电流电解加工的有效方法之一。
Chopper is one of the effective devices for pulse current electrochemical machining.
一个电解加工提供关于用户的信息和订阅的状态。
An EMM provides general information about the subscriber and the status of the subscription.
简要阐明了小间隙电解加工的主要工艺及注意事项。
The main process of small clearance electrochemical machining and the attention points were briefly stated.
探讨了高频窄脉冲电解加工(HSPECM)的机理。
In this paper, the mechanism of high frequency short pulse electrochemical machining (HSPECM) is investigated.
文摘：阐述了数控展成电解加工中展成运动的实现方法。
Abstract: in this paper, the contour evolution method of numerically-controlled electrochemical machining is described.
加工间隙的监测与控制是电解加工的一个重要研究内容。
Monitor and control of machining gap is an important topic in electrochemical machining (ECM).
定间隙间歇送进电解加工是提高电解加工加工精度的一种有效方法。
ECM with fixed gap in intermittent feed can be used as an effective means to improve the machining accuracy.
这种加工技术将有助于提高电解加工精度，扩大电解加工应用范围。
The technology will be helpful for improving the accuracy of ECM and enlarging the applied field of ECM.
本文阐述了脉冲电流电解加工对加工精度和加工过程可靠性的影响。
In this paper the effects of pulsed current on the accuracy and the process reliability of ECM is discussed.
从电解加工的特点出发，对影响微细阵列孔加工精度的因素进行了分析。
In this paper, according to the characteristics of electrochemical micromachining (EMM), the impact factors of micro-hole array machining precision are analyzed.
电解加工能够实现原子级精度的加工，而且不会破坏工件表面的物理性质。
Electrochemical machining (ECM) enables processing with atomic-level accuracy, without deteriorating the physical properties of the workpiece.
磨料水射流复合电解光整加工是在磨料水射流作用的基础上复合电解加工。
The process of abrasive water jet (AWJ) compound with electrolytic machine is based on AWJ.
阴极设计是电解加工首先要解决的问题，也是电解加工中难以解决的问题。
The problem of cathode design is the key and difficult one should be solved first.
利用纳秒级脉冲电源、毫微秒级脉冲电源和直流电源，进行了电解加工试验。
Nickel is electrochemical micromachininged using nanosecond pulse power, millisecond pulse power and direct current power.
开展了微细电化学加工技术的试验研究工作，内容包括微细电铸和微细电解加工。
This paper is focused on developing micro electrochemical fabrication processes, including micro electroforming and micro electrochemical machining.
旋转阴极展成电解加工主要用于型面的光整加工，其最终加工间隙决定了型面精度。
The ECCEM (Electrochemical Contour Evolution Machining) is mainly used for finishing surface, the final gap determines the final surface precision.
为了能够实现按最优进给角度加工叶片，研制出三轴进给的叶片电解加工专用机床。
An electrochemical machine tool with three axes was designed and manufactured for blade machining, which makes it possible for the cathode tool to move at the optimized Angle.
针对加工中，遇到窄长槽零件的加工问题，介绍了窄长槽零件的电解加工方法、经验。
Accroding to the problems in machining narrow-long slot parts, electrolyzed machining method and experience of narrow-long slot parts were introduced.
电解加工机床通常是根据用户具体需求单机生产，机床研制周期长、设计重复、成本高。
Due to low quantity demanded, the machine of Electrochemical Machining(ECM) is usually developed in single production, leading to long production cycle, repetitive design and high cost.
针对模具加工中，经常遇到的深孔及窄深槽的加工问题，介绍了深孔的电解加工方法、经验。
Aimed at the problems in processing deep hole and narrow deep slot during die manufacture, electrolyzed processing method and experience of deep hole are introduced.
如何有效在线检测并控制加工间隙，是电解加工专家、学者们始终希望解决的一个关键难题。
How to on-line monitor and control the gap in effect has been the key difficult problem that ECM experts and scholars want to settle all the time.
本文阐述了电解加工原理，介绍了阴极结构及其各部位尺寸计算公式，推荐了有关工艺参数。
This paper presents the principles of electrolysis-machining and the design of the cathode, including formulas for main dimensions, and recommends the related operating data.
文中分别进行了片状电极和丝状电极之间、不同直径丝状电极之间的窄缝电解加工对比试验。
The experiments using foil electrode and wire electrode of different size are carried out to produce narrow groove.
另外，还详细介绍了一种新型电解加工电源：用于微小型零件加工的高频群脉冲电解加工电源。
Meanwhile, a new electrochemical machining power supply is introduced in detail-a power supply for high frequency group pulse electrochemical machining used in the micro-machining.
另外，还详细介绍了一种新型电解加工电源：用于微小型零件加工的高频群脉冲电解加工电源。
Meanwhile, a new electrochemical machining power supply is introduced in detail-a power supply for high frequency group pulse electrochemical machining used in the micro-machining.
应用推荐