化学和制药领域倾向于选择电缆连接，通过电缆密封管进入盒子或传感器。
For example, the chemical and pharma sector tend to choose cable connection by means of glanded entry to the box or sensor.
介绍了目前几种电缆密封装置的使用情况，对电缆穿舱密封装置性能进行了分析研究。
This paper introduces application of several kinds of cable sealing equipment, analyzes and studies the performances of the sealing equipment for marine cables crossing cabins.
高压井口电缆密封控制系统可在不泄流、不放压，维持井内正常注水条件下进行密闭测试。
The wellhead high pressure wireline control system can conduct close-in tests without bleeding off fluid and pressure, and keeping normal subsurface water injection.
该文简述了热缩套管选用、施工处理等内容，并介绍了热缩套管工艺在舰船电缆密封方面的应用。
The technological treatment , application scope and the selection method of the heat shrinkable sleeve for marine use are described in detail.
这些危险场所电缆密封套管和插头由高性能的尼龙材料制造而成，且颜色有蓝色和黑色两种可选。
These hazardous location cable glands and strain relief fittings are made of high performance nylon and can be ordered in either blue or black colors.
请注意我们的试验箱和系统中所使用的密封材料和电缆绝缘中含有硅。
Please note that the sealing material and cable insulation used in our test units and systems contains silicone.
氯丁橡胶绝缘垫圈和全部环氧树脂密封，提供真正的无芯电缆连接。不需要另外配置绝缘电缆盒。
Neoprene grommet and complete epoxy encapsulation provide for a true non-wicking cable entry. An isolating cable chamber is not needed.
对影响大直径电缆动密封的各种因素进行了分析和理论计算，提出了推广应用此项技术应注意的关键因素。
The key factors which affect the dynamic packoff of the cable with big diameter are analysed and calculated in theory.
根据实际工作经验，在系统地分析潜水电泵电缆引入密封装置使用寿命短的影响因素基础上，对其作了结构改进。
According to practical experience, the paper systematically analyses some factors affecting the life of the cable entry sealed device, and then makes some construal improvements.
轴承设计，轴长，机械密封系统和外罩／电缆系统等部件于9100系列泵完全相同。
"Incorporates the same "construction features"as the Series 9100 for bearing design, shaft strength, mechanical seal system and cap/cable system"
在用直读式电子压力计监测地层压力时，信号电缆线在井口的密封不良，一直是个难以解决的技术问题。
When monitoring formation pressure by read-out electronic gauge, it is a technical problem to settle that the sealing condition of signal line at well head is not good.
热缩指套用于电缆分叉处的绝缘盒密封保护，有二芯、三芯、四芯、五芯规格产品。
Yonggu heat shrinkable for protection of insulation and sealing in fork position. it includes two cores. threecores. four cores, five cores.
使得线路畅通，电缆保持密封，并保证电缆接头处的绝缘等级，使其安全可靠地运行。
Making smooth lines, cables remain sealed, and to ensure that the insulation level of cable joints to make it safe and reliable operation.
电缆如果需要分段使用，电缆分段后必须用防水封帽将电缆头密封，防止进水。
If the cable should be used sectionally, the head of the cable must be sealed in order to prevent water intake.
着重介绍了高聚合度聚氯乙烯在制鞋、密封条、电缆料等方面的应用实例。
Special attention was paid to the applications of HPVC on sole, seal and compound.
本发明涉及用于同轴电缆连接器的微囊密封及其使用方法。
The invention provides a micro encapsulation seal for coaxial cable connectors and method of use thereof.
控制电缆水下联接密封插座是采用自密封原理，由普通航空插座改装而成的。
Underwater connection sealed socket for control cable is modified by common aerial socket with self-sealing principle.
同时，由于主体部分采用弹性材料，因此可适应不同内径的电缆，并可产生良好的密封效果。
At the same time, because the main body adopts elastic materials, the invention can adapt to cables with different inner diameters, and generates good sealing effect.
适用于夹持和固定各种类型的钢丝编织或带状铠装电缆，用于必须对电缆芯线部分隔爆及外壳气体密封达ip66的场所。
Applicable to all types of wire clamp and fixed ribbon weaving, or armored cable, for the need for cables and the core wire part of the flameproof enclosure up to IP66 sealing gas place.
电缆与所述密封连接件在连接处为采用热硫化工艺成型的整体。
The hot vulcanization process forming entirety is adopted at the connecting position of the cable and the branch sealed connecting component.
一种能变形的、通常是弹性的密封部件和外壳，用于密封不规则的表面，如电缆等。
A flexible, usually elastomeric sealing element and housing used to seal an irregular surface such as a wireline.
结果，粘结剂粘结形成于同轴电缆与连接器之间以生成牢固的机械粘结及水气的密封。
This results in an adhesive bond forming between the coaxial cable and the connector to create a secure, mechanical bond and moisture seal.
电缆采用添料密封。
开发了两种电缆隧道入口处堵水装置——成型橡胶件密封装置和密封膏密封装置。
Two types of water blocking device for the inlet of cable tunnel are developed, one is a profiled rubber seal and the other is a sealant seal.
本建议描述用不可燃材料来保护电缆的方法，并提供关于密封材料的分类和特性的资料。
This Recommendation describes the protection of cables by means of incombustible materials and provides information on the classification and characteristics of the sealing materials.
电缆内端头应使用钢制封帽，与金属套的密封必须采用铅封，密封性能良好。
Cable inner end must use steel nut cap. Lead sealing is required for the sealing between the cable inner head and metal sleeve, which has a good sealing property.
电缆的一端永久性连接在封闭的水银开关内，这个完整的密封总装形成完全不透水、抗撞击装置。
One end of the cable is permanently connected to the enclosed mercury switch and the entire assembly is encapsulated to form a completely watertight and impact resistant unit.
热缩指套用于电缆分支叉处的绝缘和密封保护，有二芯、三芯、四芯、五芯的产品。
Heat shrinkable finger sleeve is suitable for protection of insulation and sealing in fork position. It includes two cores, three cores, four cores, five cores.
可对任意形状的带电体进行防护，解决相间距的不足，用于被损坏电缆修补，电力电缆中间接头侧面密封等问题。
It Can be charged for any body shape for protection, with space to solve the shortage, for repairing damaged cable, Power cable Joints side sealing problems.
可对任意形状的带电体进行防护，解决相间距的不足，用于被损坏电缆修补，电力电缆中间接头侧面密封等问题。
It Can be charged for any body shape for protection, with space to solve the shortage, for repairing damaged cable, Power cable Joints side sealing problems.
应用推荐