电磁检测法是目前公认的最可靠的钢丝绳检测方法。
Among those nondestructive testing methods for wire ropes, the electromagnetic testing method is recognized as the most credible one.
电磁检测方法主要有材料磁性量测、巴克好森噪声和磁声发射。
Magnetism measuring, Barkhausen noise and magnetic acoustic emission were often used for electromagnetic testing.
钢丝绳张力对钢丝绳电磁检测精度的影响是有待深入研究的问题。
The influence of the wire rope tension on the electromagnetic inspection accuracy needed to be researched deeply.
钢丝绳的电磁检测技术从磁化强度上分为强磁检测和弱磁检测两类。
The wire rope electromagnetism testing technology is sorted to testing of strong magnetism and testing of weak magnetism from the magnetization intensity.
系统采用电磁检测方法，已在徐浦大桥缆索机器人现场试验中成功进行了实践。
The electromagnetic system was successfully applied in field test of cable robots on Xupu Bridge.
对材料硬度、硬化层深度、晶粒大小、极限强度等主要采用电磁检测和超声检测。
Electromagnetic testing and ultrasonic testing are the main points for materials hardness, hardness depth, crystallite size, limiting intensity etc.
又或者你得和其他技术员们一起坐在凳子上，将完工的手机电路板放到类似于小炉子的衬铅盒子里，以检测每块部件的电磁干涉。
Or you could sit at a bench with other technicians placing completed cell-phone circuit boards into lead-lined boxes resembling small kilns, testing each piece for electromagnetic interference.
M大爷：我们发现，DNA在水中会有结构上的变化，这个变化在即使高度稀释也会保持，并且这个变化会导致DNA发射电磁信号，而我们可以检测这个信号。
L.M. : What we have found is that DNA produces structural changes in water, which persist at very high dilutions, and which lead to resonant electromagnetic signals that we can measure.
并不是所有的DNA信号都可以被检测到，我们的设备可以特异性高敏感的检测到来自细菌和病毒的DNA发射的电磁波。
The high-intensity signals come from bacterial and viral DNA.
这个电磁信号可以作为检测细菌存在与否的生理标记，尤其是当传统的检测方法，比如PCR不起作用的时候。
The waves give us a biomarker to test for the presence of these bacteria, even when we can’t detect them with classical techniques like PCR.
这个电磁信号可以作为检测细菌存在与否的生理标记，尤其是当传统的检测方法，比如pcr不起作用的时候。
The waves give us a biomarker to test for the presence of these bacteria, even when we can't detect them with classical techniques like PCR.
机械控制电路实现水位检测、电机驱动、进水、排水等功能，主要由水位检测器、电动机、传动系统部件、进水排水电磁阀组成。
Machine control circuit realizes the functions of water level detect, motor driven, water import and export, it consists of water level detector, motor, transmission system components and penstocks.
分析了复合材料微波检测中电磁参量、电磁波频率和介质薄片厚度的计算方法。
The computation methods of electromagnetism parameters, electromagnetic wave frequency and medium slice thickness in microwave measuring for composite material were analyzed.
通过对存在缺陷的XLPE电力电缆线段的检测表明，电磁耦合法能较好的反映其局部放电特性。
The detection of defected XLPE cable section, showed that electromagnetic coupling method can better reflect the characteristics of partial discharge of the cable.
根据直升机起飞、着舰时所需的助降灯光使用要求，考虑电磁兼容性标准，详细介绍了灯光助降系统的主机板、电源板、驱动电路、故障检测电路等硬件设计过程。
On the basis of the need of the lamplight for the helicopter to take off or touch down at the warship, the standard of the electromagnetic compatibility is considered.
基于电磁原理，构建实验装置，以研究水泥杆中钢筋的检测方法。
This paper introduces an experimental device used in research on electromagnetic test of cement pole.
介绍了某型检测设备系统的电磁兼容设计方法。
The paper introduces electromagnetic compatibility(EMC)design for a certain missile test equipment.
阐述了我国电站锅炉管道无损检测自动化技术的发展趋势，提出应积极研究、开发和推广电磁超声技术和蒸汽管道泄漏超声检测技术。
It is pointed out that the research, development and popularization of electromagnetic ultrasonic testing and ultrasonic detection of leakage in steam pipelines should be carried out.
用电磁感应原理来检测墙体中带交流电的火线，其电路简单而可靠。
The principle of electromagnetic induction is to be used to detect AC living wire in a wall, the circuit is simple but reliable.
研究了计算机电磁泄漏信息的检测、接收与重现技术。
The detection, reception and recovery of EM leakage information from computer are investigated.
分析了汽轮发电机发生转子绕组匝间短路故障时的电磁特性，提出了基于小波分析的故障检测与诊断方法。
Electromagneic characteristic of the interturn short circuit in turbo-generator rotor windings is analyzed. And a method of fault detection and diagnosis based on wavelet transform is presented.
用动态接触电阻测量系统进行了电磁继电器失效检测试验，检测了其触点闭合过程的接触压降。
The contact voltage-drop of counterpart contacts in the closing course of electromagnetism relay is observed and recorded in its failure test using dynamic contact resistance measurement system.
采用电磁隔离霍尔元件进行电流检测，采用了IGBTCPV 363m 4 K模块组成逆变桥来实现功率主回路直流到交流的逆变。
Electromagnetism isolated Hall sensor is used to sense the phase current of the PMSM, and the IGBT CPV363M4K module is used to implement the inverter.
本文介绍了日产风度轿车RE4F04A型自动变速器的主要传感器、电磁阀、各种开关、控制单元及其控制电路的检测方法。
This paper introduces the detecting means of the main sensors, solenoids, all kinds of switches and controlling unit about RE4F04A automatic transmission used in Nissan Cefiro sedan.
分析了电机绕组在各种状态下检测电流与电机电磁转矩的关系，并进行了实验验证。
The relationship between detection current and electromagnetic torque was analyzed in each state and it's testified by experiment.
提出了一种基于电磁波检测的零值绝缘子诊断方法，即联合采用基于(特高频)uhf和(高频)HF的局放电流检测方法。
A diagnosis method of zero-value insulator based on electromagnetic wave detection is put forward, namely partial discharge detection method jointly using UHF and HF.
本研究提出了一种利用普通的电磁式速度传感器检测超低频绝对振动信号的技术方案。
This research offers the technical scheme of detecting ULF Absolute Vibratory signal by the normal electromagnetism rate transducer.
电磁无损检测钢轨踏面硬度中，检测信号对提离效应极其敏感，所以必须对提离效应加以抑制。
Testing signal is very sensitive to the lift off effect in the hardness nondestructive testing of rail surface by electromagnetic method, so lift off effect must be restrained.
用动态接触电阻测量系统进行了电磁继电器失效检测试验，监测了其触点闭合过程的接触压降。
The contacts voltage of counterpart contacts in the close course of electromagnetic relay is observed and recorded in its failure tests using dynamic contact resistance measurement system.
用动态接触电阻测量系统进行了电磁继电器失效检测试验，监测了其触点闭合过程的接触压降。
The contacts voltage of counterpart contacts in the close course of electromagnetic relay is observed and recorded in its failure tests using dynamic contact resistance measurement system.
应用推荐