IARC专题工作组就以下暴露于射频电磁场的方式对现有文献进行了讨论和评价。
The IARC Monograph Working Group discussed and evaluated the available literature on the following exposure categories involving radiofrequency electromagnetic fields.
不过，包括传播我们自己的电磁波在内的现代通讯方式正在试图寻在接触点。
However, more recent modes of communication have included beaming our own radio waves into space attempting to make contact.
从下学期起我们将搬去，电磁学自己的实验室，现在这门课还是用，讲座-背诵型方式讲授。
From next term we try to move it into the own term version of electromagnetism, which are up till now has been taught in the lecture-station format.
紫外线发光二极管则可以提供一种方式来提高电磁频谱的一部分，从而生产出颜色更深、更多姿多彩的莴苣。
Ultraviolet LEDs could provide a way to replace and enhance this part of the electromagnetic spectrum to produce darker, more colorful lettuces.
发现了力和运动的共存方式。据此，统一了电磁力、强力、引力，并解释了湍流和地球自转的动力原理。
Find a way of force and motion coexist. Accordingly, the unification of the electromagnetic force, powerful force, gravity, and explains the turbulence and Earth's rotation principle.
同时，由于工业现场对抗电磁干扰和传输距离有比较高的要求，所以本设计采用CAN总线作为各个模块通讯的方式。
At the same time, because of high requirement of anti-electromagnetism interference and long distance this design uses CAN bus as the communication style of every module.
在电磁能量的返回方式，测量对象与探测结果的表示形式方面，与典型大地电磁法进行了比较。
Ther are some differences in the returnable behaviour of electromagnetic energy, the measuring objectivs and the expression of the detecting results when compared with the MT method.
电磁阀是用电磁的效应进行控制，主要的控制方式由继电器控制。
Electromagnetic valve is used to control the effects of electromagnetic, the main control by the control relay.
指出了静触点结构、回位弹簧弹力以及通电方式是影响电磁开关粘连的主要因素；
The structure of fixed contact, return spring and conduction ways are the major factors influencing the power-on of electromagnetic switch.
实践证明，为减小旁侧影响，避免其它电磁信号干挠，合理选择激发方式、激发位置对探测效果影响很大。
Practice demonstrated to reduce lateral influence avoid other electromagnetic signal disturbance rationally select inducing mode and position have prodigious influence on detection effects.
电锅炉，通俗来讲，它就是一种电热转化的原理，电磁是它转化成热能的一种介质，也可以说是方式。
Electric boiler, in general terms, it is a principle of electric heating conversion, it is a medium of electromagnetic energy into heat, can also be said to be the way.
TL690折叠式FM/AF数字显示无线耳机采用的是电磁换能技术作为电声转换方式。
TL690 the foldaway FM/AF numeral demonstrated the wireless earphone uses the electromagnetism trade technology as the electroacoustical transformation way.
作者根据自己工作经验，提出了交流电磁铁芯短路环的几种安装方式优缺点及工艺上应注意的问题。
On the basis of working experience, some vital problems concerning several mounting methods, merits and faults and the process of AC electromagnetic core of short circuit ring are mentioned.
提出了采用三值梯形波励磁方式的电磁流量计设计。
Electromagnetic flowmeter adopting three-value trapezoidal waveform exciting mode is proposed in this paper.
详细介绍了新研制的电控式VE分配泵供油正时控制电磁阀工作原理、结构形式、参数计算、控制方式以及对应的驱动电路。
The principle, structure and parameters of the solenoid valve used to control the fuel injection timing of VE pump are described. The control method and circuit are studied.
通过实验研究了不同加载方式下的煤岩破坏电磁辐射记忆效应特性；
The characteristics of memory effect of electromagnetic radiation (EMR) during the fracture of coal or rock in different loaded ways are studied.
这种点火方式与传统的通过电磁感应产生高电压点火方式不同，被称为电容放电点火(CDI)。
This particular system is different from the conventional magnetic inductive system and is called Capacitor Discharge Ignition (CDI).
气动系统电磁换向阀采用汇流板集装方式，减少了占用空间；
Electromagnetic valve of pneumatic system adopts conflux boards so as to reduce space.
本论文针对特定的电磁跟踪式输入方式，完成了从虚拟雕刻设计到实际加工的映射。
This thesis also analysis the coordinate mapping from virtual sculpting to realmachining based on the Human Computer Interactive input way of electromagnetictracing.
介绍一种针对工企业应用中电磁阀门开启度大小，而设计的具有手动与自动两种控制方式的，内嵌式数控恒流源电路。
This paper presents imbedding the Digital control-Constant current, it enable applied at control of electromagnetic switch, and Double modes-control was designed in it.
按电磁式继电保护及常规操作方式的变电站建设模式逐渐被淘汰。
The substation construction mode according to electromagnetic relaying and conventional operational way is being given up.
本研究采用化学镀的方式对木材进行处理，制备出的木质电磁屏蔽材料是一种新型消除电磁污染的材料。
Wood material is treated with electroless plating, and the preparation of wood electromagnetic shielding material is regarded as a new type material for eliminating electromagnetic pollution.
以电磁铁的电磁吸力与电磁铁线圈的电流的关系为基础，设计基于PWM控制方式的电磁阀驱动电路。
Based on relation between electromagnetism force and coil circuit of high speed solenoid, The solenoid drive circuits are designed based on PWM controlled type.
这似乎意味着魔法以某种方式影响了电磁波，进行了重大的能量转换。
It seems to imply that magic affects the electro-magnetic spectrum in some way. Some serious energy is being dealt with.
电磁控制进排气门是一种新型的可变配气相位技术，在发动机上以电磁驱动气门比传统的凸轮驱动方式具有更大的优越性。
Electromagnetic control valve actuation is a new kind of variable valve timing technology. It can offer more advantages than general camshaft valve actuation when used in the engine.
他们提出的新方式起始于一种观测—当某些特定的电磁辐射穿越大气层时，下雨会增加穿透的难度。
Their scheme starts from the observation that rain can make it harder for certain sorts of electromagnetic radiation to travel through the atmosphere.
电磁干扰以多种方式存在于汽车内部，这些干扰对车载电子装置及无线电接收设备会产生不同程度的影响。
The electromagnetic interference exists in the automobile with the different kinds. The interference has the varying degree influence on the vehicle electronic device and the radio receiver.
该文采用电磁带隙(EBG)结构层覆盖的方式实现了一种锥形方向图。
In this paper, a cone pattern is realized by covering an electromagnetic band-gap (EBG) structure.
该文采用电磁带隙(EBG)结构层覆盖的方式实现了一种锥形方向图。
In this paper, a cone pattern is realized by covering an electromagnetic band-gap (EBG) structure.
应用推荐