其研究结果对引信电磁兼容性设计具有一定的积极作用。
The results obtained in this paper have positive effect on fuze EMC design.
为从事电磁兼容性设计的技术人员提供了成功的抑制骚扰电压的解决方案。
This article provides the successful solutions that restrain disturbance voltage for the technical personnel engaged in the electromagnetic compatibility design.
高速混合PCB的电磁兼容性设计首要解决合理安排布局布线和接地问题。
The problem of reasonable layout wiring and grounding is firstly resolved in design of EMC for PCB with high-speed and digital and analog mixed signals.
本文还对OBD系统电控单元进行了电气负荷与电磁兼容性设计与试验评估。
This article also developed electrical load and EMC design of OBD system electronic control unit.
介绍了电磁兼容性的基本概念以及火控计算机系统中采用的电磁兼容性设计方法。
The article introduces the basic concept of electromagnetic compatibility and the design of electromagnetic compatibility used in the fire control computer.
智能传感器系统作为现代信息技术的基础之一，对其进行电磁兼容性设计显得越来越有必要。
As one of the basis of the information technology, the electro-magnetic problem for the intelligent sensor systems is becoming more and more important.
本文将设计问题分为热设计，低温设计，机械性能设计，密封设计和电磁兼容性设计五个部分来阐述。
In the last part of this paper, it discussed the problems of thermal design, low temperature design, mechanical design, sealing design, and electromagnetic compatible design.
针对开关电源印制电路板的电磁兼容性设计，从PCB的布局与布线、接地等方面提出设计原则及注意事项。
The design rules and observing proceedings are presented from the layouts, wires placing and grounding of the printed circuit board (PCB) aiming at the EMC design of switch power supplies.
介绍了元器件的选择与使用、降额设计、热设计、冗余化设计和电磁兼容性设计等多种电子产品可靠性设计的技术方法。
In reliability design, the article emphatically introduces the choice and use of components the design of the sub-rating, the heat, redundancy and EMC.
反激式开关变压器和反馈控制回路设计，以及考虑电磁兼容性对电路的改进，是其关键技术。
The design of flyback switching transformer and feedback control loop and the improvement of the circuit for considering electromagnetic compatibility are the critical technologies.
实验结果表明，所设计继电器不仅实时性好、电磁兼容性强，而且体积小、成本低、容易实现。
The experimental result shows that the designed digital relay has the characteristics of good real-time, high EMC, small volume, low cost and simple implementation.
根据直升机起飞、着舰时所需的助降灯光使用要求，考虑电磁兼容性标准，详细介绍了灯光助降系统的主机板、电源板、驱动电路、故障检测电路等硬件设计过程。
On the basis of the need of the lamplight for the helicopter to take off or touch down at the warship, the standard of the electromagnetic compatibility is considered.
做验证测试，电气和电磁兼容性测试，解决电气设计问题。
Do verification test, electrical and EMC test, solve electrical design issue.
经实验证明，文中所提到这些抗干扰方法是可行和有效的，并且对其它电力电子装置的电磁兼容性的设计也具有一定的借鉴作用。
The anti-interference methods are proved feasible and effective in practical, which are also useful to electromagnetic compatibility design of other electronic devices.
着重介绍了电磁兼容性在引信试验场中五维定位系统设计中的重要作用和系统设计中所采用的抗干扰方法和对策。
The important role of electromagnetic compatibility in five-dimension positioning system in fuse test field and the methods for handling the noises in this system are presented emphatically.
为了满足电磁兼容性和安全性要求，设计了EMI抑制电路。
The EMI suppression circuit is designed to meet the requirements of electromagnetic compatibility and safety.
本文介绍了数控系统开关电源电磁兼容性emc涉及的内容，然后提出开关电源电磁兼容性的设计方法。
This paper introduces the content of electromagnetic compatibility (EMC) of CNC system switching power source and design method of it.
最后总结分析了开关型变换器电磁兼容性优化设计的原则和方法。
In the end, principles and methods of optimal design of the EMC on full bridge switching-mode converters are analyzed.
本文提出了对电磁兼容性的控制方法，以及针对不同的设备或系统不同的设计方案，并介绍了电磁兼容性的测试。
This paper presents the way to control Electromagnetic Compatibility and different designs that aim at different equipments or systems. It also introduces the test of Electromagnetic Compatibility.
这些问题涉及到EMC（电磁兼容性）设计和高速PCB板设计。
The EMC (Electro Magnetic Compatibility) and the design of PCB were also involved in these problems.
接着对该ECU的电磁兼容性进行了有效设计，并着重解决了ECU的抗干扰性能。
To ensure the anti-interference capability of the ECU, the EMC design of the ECU is carried out.
以印制电路板的电磁兼容性为核心，分析了电磁干扰的产生机理，详细介绍了在设计、装配印制电路板时的抗干扰措施。
The mechanism of EMI is analyzed, and the anti-interference measures of the PCB in design and assemble are amply introduced with the core of EMC.
提出了微处理器系统硬件电路及软件的抗干扰设计方法，结果表明，万能式断路器具有良好的电磁兼容性，实际运行稳定、可靠、安全。
The hardware circuit and software's anti-jamming design method were raised, and the results show the universal circuit breaker is with fine EMC, stable in actual operation, reliable and safe.
本文结合实际情况，总结了数字式心电图机电磁兼容性的一般设计，可为同行在维修时提供参考。
Based on actual conditions, this article summarized the general EMC designs of ECG for peers to provide a reference in maintenance.
并且，研究了高速电路设计所涉及的如信号完整性和电磁兼容性问题，并在其指导下根据原理图进行了PCB设计，重点攻克了低成本架构带来的布局布线困难。
Moreover, high speed circuit design such as signal integrity and electromagnetic coexist is researched and PCB is designed on schematic. PCB layout and route are mainly solved in PCB design.
主讲电磁兼容性原理、电磁测量、仪器设计等课程。
Main Course: Principles of Electromagnetic Compatibility, Electromagnetic measurement, instrument design and so on.
设计的组合天线具有良好的电磁兼容性，仿真结果表明该天线对于接收“北斗”和GPS信号都具有较好的圆极化轴比和增益方向图。
The simulation indicated that the polarization axial ratio and antenna gain pattern of this antenna are good for "BD-1" signal and GPS signal.
设计的组合天线具有良好的电磁兼容性，仿真结果表明该天线对于接收“北斗”和GPS信号都具有较好的圆极化轴比和增益方向图。
The simulation indicated that the polarization axial ratio and antenna gain pattern of this antenna are good for "BD-1" signal and GPS signal.
应用推荐