研究了在大气和乳化液两种介质中，峰值电流对高速走丝电火花线切割加工的影响。
The influence of peak current on finishing high-speed wire electrical discharge machining (WEDM) in gas and emulsion dielectric is studied.
提出了一种基于复合工作液的、以电火花电解复合加工技术对太阳能硅片进行切割的工艺方法。
A solar wafer slicing method was studied, which was based on complex dielectric fluid and efficiency electric discharge machining (EDM) and electric chemical machining (ECM) technique.
开发了能实现复杂曲面零件电火花线切割加工的多轴联动加工系统。
In this paper, the motion rules of multiple spindle linkage motion in machining complex ruled curved surfaces by WEDM was analyzed.
电火花切割加工中，步进电动机失步产生误差，直接影响加工精度。
During the protess of elecrospark wireelectrode cutting, step motor makes mistakes because of outof synchronism, which will affect accuracy of process directly.
拥有先进的电火花线切割加工等专业设备，独到的设计，精益求精的品质，使南方尼的模具遍及大江南北，美名远扬。
The company is equipped with advanced electric spark and line cutting etc . equipment . nanfang nylon mould has enjoyed high confidence and popularity throughout china owing to precise manufacturing.
慢走丝电火花线切割加工精度是衡量加工性能的重要指标之一。
Machining accuracy of slow-feeding EDM wire-cut is one of major targets scaling processing properties.
通过对电火花线切割机床在加工过程中的特殊受力分析，给出步进电机的匹配选择方法。
This article introduced the matching selection of step motor for wire-cut electric discharge machine by analyzing the special stress of the machine.
本文进行了电加工中的磁力电解抛光和干式电火花线切割两方面内容的研究。
WE study two areas of the electro-machining: the magnetic force electrolysis polishing and the dry-type WEDM.
随着对产品性能和加工精度要求的不断提高，低速走丝电火花线切割加工在机械加工领域中的地位日益突出。
With the improvement of product performance and accuracy of machining, LS-WEDM has increasingly played an important role in the field of mechanical machining.
气中电火花线切割加工技术是近几年出现的一种新技术，它采用气体作为介质。
WEDM in gas is a kind of newly developed technology, in which gas has been used as a dielectric.
试验表明，这种高质量的脉冲电源为改善微细电火花线切割加工整体性能、拓展加工领域提供了技术保证。
A large quantity of experiment show that this MWEDM pulse generator can improve overall process performances, provide guarantee of technology for expanding machining field.
应用高速摄影技术研究电火花线切割加工（WEDM）放电、热蚀、气泡运动和金属材料的抛出过程，并对线切割加工放电的过程进行了描述。
The Paper presents the processes of corrosion, bubble movement and vaporization of metals in WEDM by using high speed photography, and also describes the process of electric discharge in WEDM.
叙述了在使用低速走丝电火花线切割机床加工精密模具时，一些常用的加工工艺技巧及编程方法。
Some commonly used machining process skill and programming method were introduced when using low speed WEDM machine to machine precision mold.
采用一般的脉冲电源对磁钢进行电火花线切割加工，不可避免地将引起充磁，造成排屑困难。
When the method of general pulse power of wire cut EDM is used, magnetic steel has magnetic property inevitably and it is difficult to evacuate.
加工设备：数控铣，精雕，电火花，线切割，钻床，磨床。
Processing equipment: CNC milling, Carving, Electrical sparkle, linear cutting, driller, Grinder, Conventional Milling CNC Machining Center.
电火花线切割加工精度，主要指尺寸精度、形状精度、位置精度以及加工表面粗糙度。
The machining accuracy of WEDM means mainly the dimensional accuracy, accuracy of form, accuracy of position, and the surface roughness of cut surfaces.
电火花线切割加工的表面粗糙度是衡量加工质量的重要指标之一。
The surface roughness in the wire cut of electric discharge machine work is one of the important parameters to measure the work performance.
分析了板线内导体在利用数控电火花线切割加工中所遇到的工艺技术难题。
The core technique problems during wire cut electrical discharge machining in the inner conductor sheet were analyzed by this paper.
低速走丝电火花线切割机走丝系统是否能稳定运行，直接影响着加工精度和加工表面质量。
Whether the wire winding system of LSWEDM(low speed wire electrical discharge machine) can run stably directly affects the machining accuracy and machining surface quality.
根据处理后的图形数据信息，按照加工程序的代码格式自动编制出电火花线切割两种常用的G代码和3b格式加工程序。
According to the treated figure data information, the program is worked out automatically in two kinds of code: ISO standard code format-g code and 3b code, which are in common use in WEDM.
分析了在微细电火花线切割加工中出现的各种丝损现象，以及影响丝损现象的原因，提出了减少丝损的措施和对策。
The phenomena of wire wear in the process of Micro-WEDM and the relevant factors causing wire wear are analyzed.
设计了一套超声辅助电火花线切割加工的实验装置，并对复合加工的机理和特性进行了研究和探讨。
A set of experimental device that ultrasonic aided wire cut machining has been developed. and the mechanism and inherent nature of combined technology are explored and studied in deep going.
应当对高速走丝电火花线切割的各个方面综合治理，才能在提高加工精度上取得突破性成果。
Only by tackling the problems concerning various aspects in a comprehensive way can we gain the breakthrough in raising the machining accuracy of WEDM with high wire-travelling speed.
提出了一种加工微细轴的新方法——电火花切割研磨法。
A new method, WEDG (Wire Electro Discharge Grinding), for EDM 'ing very thin rods is proposed in this paper.
用气体介质代替液体介质，开发出了一种新型的电火花切割精加工工艺。
A new WEDM (Wire Electrical Discharge Machining) technology for finishing cut has been developed, in which gas has been used as a dielectric instead of water.
本文通过对电火花线切割加工工艺规律的分析，选取影响工艺效果的主要因素：工件厚度、脉冲宽度、脉冲间隔、脉冲高度，作为输入向量。
By analyzing the law of WEDM processing, this article selects the main factors affecting process: the thickness of the work-piece, pulse width, pulse interval, pulse height, as the input vectors.
分析了数控电火花线切割加工在塑料模加工中的应用场合，探讨了数控电火花线切割加工在塑料模加工应用中的几种特殊方法。
This paper analysis on CNC WEDM apply in the plastic mould process, and discuss special method of WEDM in the plastic mould process.
高速走丝电火花线切割加工过程中，电极丝有时会出现先有花斑后断丝的现象。
Indistinct pattern are sometimes found on the wire electrode wound regularly in reciprocating travelling WEDM.
高速走丝电火花线切割加工过程中，电极丝有时会出现先有花斑后断丝的现象。
Indistinct pattern are sometimes found on the wire electrode wound regularly in reciprocating travelling WEDM.
应用推荐