该电源由一个电源控制模块和多个电源变流模块组成。
The power supply consists of a power control module and several power converter modules.
辅助电源变流系统由晶闸管整流器和被测igbt逆变器组成，负载采用PWM整流器控制输出电流。
The converter is composed by thyrister rectifier and IGBT inverter, and USES a PWM rectifier as a load to control output current.
调节为基础，利用快速可控硅做开关元件，研制的一台新型等离子弧切割电源——输出直流100a逆变切割电源。
M. adjusted, by the use of high speed SCR gate, a new convening power source with output of 100a for plasma are cutting is developed.
对逆变方波交流电弧喷涂过程中电弧区的动态行为进行了一定试验分析，得出逆变方波交流电源是理想的电弧喷涂电源。
It is also proved to be the ideal power source for arc spraying process according to the experimental analysis of the dynamic behavior in arc.
介绍了所研制的具有自调整换向功能的大功率变极性等离子弧焊接电源。
A novel variable polarity plasma arc welding (VPPAW) power supply is introduced in this paper.
该电源可实现变极性方波交流、直流、脉冲电流等多种输出。
The power can output several kinds of welding current such as variable polarity square wave AC, DC and pulse current etc.
提出采用大功率IGBT设计变极性脉冲MIG焊双逆变弧焊电源。
The high-power IGBTs are adopted to design the dual inverter arc-welding power source for variable polarity pulse MIG welding.
为了进行电源系统分析和设计，本文建立了电压模式和峰值电流模式控制的逆变弧焊电源数学模型，并用计算机进行分析。
In order analyze and design the power supply system, the system models which control by two above-mentioned control modes are established and analyzed by computer.
对一种大功率IGBT逆变式空气等离子切割电源的主电路进行了原理分析与设计。
The paper analyzes and designs the main circuit of high-power IGBT inverted air plasma cutting power supply.
针对手工焊条电弧焊(MMA)弧焊过程特点，建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
采用软件环分，降低了硬件成本，提高了驱动电源的可靠性，方便于实现变拍驱动。
The cost of hardware is lowered, the reliability of the driving power-supply is raised and the drive of variable rhythms is easy to be realized by the use of software circular - allotting.
本文就GNG系列逆变式高压真空直流电源的原理系统、设计特点、技术性能等做一简要论述。
In this paper, the principle system, design characteristic, technology performance of high voltage vacuum power supply in GNG series inverter type are briefly mentioned.
采用软件环分，降低了硬件成本，提高了驱动电源的可靠性，便于实现变拍驱动。
The cost of hardware is lowered, the reliability of the driving power-supply is raised and the drive of variable rhythms is easy to be realized by the use of software circular-allotting.
设计了一种集充电和逆变功能于一体的大功率光伏逆变电源系统。
A kind of high power photovoltaic inverter power system, containing charge and inversion function is designed.
电源主回路主要由飞轮脉冲发电机、整流变压器、晶闸管变流设备、硅整流器、开关网络等组成。
The main circuit of power supply is made up of pulsed generators with flywheel, rectifier transformers, thyristor converters, diode rectifiers and switches.
本文在传统晶闸管逆变弧焊电源的基础上，实现了采用8098单片机系统的微机控制模式。
In this paper, the micro-computer controll mode adopting 8098 slice computer system is realized on the basis of traditional thyristor arc welding rectifier.
逆变式弧焊电源是新一代的弧焊电源，其特点是速度快，直流输出电流波纹小，电弧稳定，质量小，体积小，能耗低。
The inverter arc welding power source is the new power source and features high speed, small DC current ripple, stable arc, light weight, small capacity and low power consumption.
变频调速技术通过改变电动机工作电源频率调节电机转速，消耗的电能随风量大小而变，具有显著的节能效果。
By using the frequency and speed modulation technology, the electricity consumed will vary with the amount of the wind, thus a remarkable energy-saving result is achieved.
介绍了并联逆变式IGBT变频电源的工作原理及在汽车发动机曲轴淬火上的应用情况。
The working principle of the parallel contravariant IGBT variable frequency power supply and its application in the quenching process of engine crankshafts are introduced.
利用大功率开关电源技术研制出新一代的IGBT逆变式恒电位仪。
A new generation of IGBT inverse constant potential instrument is developed by using powerful switching power supply technology.
分析了逆变焊接电源输入端e MC设计的原理，并在一些实践的基础上提出了具体的抑制eMI的措施。
The design principle on EMC of input for inverter welding power source is analyzed in this paper, and some methods for restraining EMI are put forward on the basis of the practices.
介绍了大功率单相变频加热电源的系统组成，包括整流、滤波、逆变和控制电路等部分。
This paper introduces the system of single phase large power source varied frequency for heating, contains rectifier, filter, inverter and control circuit etc.
重点分析了YAG激光器串并联混合谐振型逆变开关电源的结构和性能。
The paper mainly analysised the structure and features of series parallel resonant inverse switch power supply designed for pulse YAG laser.
为了研究高性能、高效率的CO_2焊接电源系统，本文引入了逆变技术，并使用IGBT作为功率器件。
This paper introduces inverter technology and USES IGBT as power component to research high performance and high efficiency CO2 arc welding power source.
电源模块为系统控制电路、变频驱动电路、变送电路、DSP芯片提供不同要求的电源。
The power supply module provides the control circuit, the drive of frequency conversion circuit, transaction circuit and DSP with different power supply.
逆变式点焊电源是电阻焊领域研究的重要方向之一。
Inverter spot welding power source is one of important directions in the studies of the resistance-welding field.
本文提出了逆变式弧焊电源高频变压器的设计步骤、方法以及实例。
The design procedures and examples of high frequency transformer Used in Inverter ArcWelding Power Source are proposed in this paper.
采用状态空间平均法建立了全桥逆变式弧焊电源主回路的平均状态方程，经过线性化处理推导出频域小信号模型。
The paper introduces the dynamic characteristic and the structure of arc welding power, and gives a method of designing arc welding power which using DSP chip as a controller.
可供设计逆变式弧焊电源时参考。
The designs for inverter arc welding power sources are available for reference.
采用具有全程调速器的内燃发动机、发电机、逆变弧焊电源，以及二次控制系统构成发电电焊两用机。
Generating and welding dual use set consists of generator, welding inverter, automatic control system, and internal-combustion engine controlled by speed regulator.
应用推荐