液电清砂技术是解决铸件清理问题的一种新方法。
Electrohydraulic cleaning Technique is a new method of solving cast - cleaning problems.
本论文正是在电液伺服控制技术的基础上，完成了基于DSP的电液伺服测控系统的研究。
The paper is completed research of measurement and control system based on DSP under technology.
本文对“电液集成块”及其回路作了介绍，并对其CAD技术作了简介。
This paper describes electrohydraulic integrated block and its circuit, and briefly introduces its CAD technique.
应用比例技术能使电液信号转换过程可控，采用比例阀可以方便、快捷、精确地完成工作循环过程。
The procedure of electric and hydraulic signal exchange can be controlled by the application of proportional technique, and work circle can be fulfilled conveniently, rapidly and accurately.
在电液比例流量阀中，本文采用了以单片机c 8051f 320为核心的控制技术。
This paper adopts the control technology of single chip C8051F320 core in electronic-hydraulic proportional flow valve.
介绍了电液比例控制技术在衬垫摩擦系数中的应用及摩擦系数测定的原理。
The application of electro-hydraulic proportional control technology in the test of liner friction coefficient and the testing principles of friction coefficient were introduced.
计算机辅助测试(CAT)技术的兴起和应用，为电液伺服阀、比例阀性能测试开辟了广阔的发展前景。
The application of computer-aided test (cat) provides a brilliant future for characteristic test of servo valve and the technique of virtual instruments brings cat into a new developing stage.
在大型构件液压同步提升技术中，采用了计算机输出的脉宽调制信号作为电液比例流量阀的输入电流信号控制液压提升器的速度。
In hydraulic synchronizing lifting technology for oversize structure, computer output PWM signal as the input current of proportional valve is used to control the velocity of hydraulic cylinder.
介绍了ZYJ7型电液转辙机的特点及技术改进和工艺质量控制，并提出了养护使用时应注意的事项。
The characteristics, technological innovation and technology quality control of ZYJ7 electrohydraulic switch machine is introduced in this paper, and the issues in the maintenance are put forward .
多功能人工关节模拟试验机是一台集机、电、液技术于一体的专用台架试验设备。
The tester for simulating artificial joints is an appropriative pedestal equipment which involves mechanism, electricity and hydraulic.
电液控制塞阀是近年来应用于流化催化裂化装置的高新技术设备。
Electro liquid control plug valve is the high and new technical equipment applied in FCC unit in recent years.
介绍了虚拟仪器技术并采用虚拟仪器实现了电液伺服控制系统的计算机辅助测试。
The CAT system for electrohydraulic servo control system based on virtual instruments was introduced. The structure of system is based on PC-DAQ.
目前，关于粉末成形液压机的研究热点是电液比例技术在粉末成形液压机中的应用。
At present, the hot research spot about the powder forming hydraulic press is the application of electro-hydraulic proportional technology in the powder forming hydraulic press.
本文以电液比例压力阀为例，介绍了采用测控一体化技术的比例阀试验系统。
With a example of electro-hydraulic proportional pressure valve, a electro-hydraulic proportional valve test system with integrated test and control technology was introduced.
液压电梯是一种典型的电液速度控制系统，直接轿厢速度反馈控制是一项先进的技术。
Hydraulic elevator is a typical electrohydraulic control system, and the speed feedback control method is advanced technology.
介绍了蒸气锤改造成电液锤的主要技术参数及改造后电液锤的节能效果。
This scrap mostly expatiate on mian technical parameters for the steam hammer refit to a electro_hydraulic hammer, and refer its benefits on save energy.
利用电液伺服控制技术，设计一套适用在颈椎牵引椅中的电液伺服控制系统，通过M ATLAB软件对系统进行仿真，最终获得较好的控制效果。
A set of electro hydraulic servo control system was designed suitable for cervical traction chair and it was proved to be effective through MATLAB stimulation.
研究转动式电凝聚技术用于乳化液破乳处理的效果和可行性。
The effect and feasibility of the rotational electrolysis coacervation technology applied to emulsion breaking of emulsion wastewater from metal machining is investigated by experiments.
油研带来贯穿其广泛的比例阀的选择边缘的电液控制技术给您。
Yuken brings cutting edge electro-hydraulic control technology to you through their extensive proportional valve selection.
射流感应破裂荷电是一种以静电学、两相流理论及空气动力学理论为基础的能产生超高荷质比带电液滴的新技术。
The droplet size and the charge to mass ratio are measured by developed device of particle charge to mass ratio and reagent of catching fuel droplets.
提出了电沉积铑技术中的两个难点，即电解液的配制和铑镀层中残余内应力的消除。
Two problems in electrodeposition of noble metal Rh were proposed. They were of how to prepare the electrolyte and of how to remove the residual stress in electrodeposited Rh coat.
电液伺服控制系统是液压领域的重要分支，也是控制技术的重要组成部分。
Electro-hydraulic servo control system is an important branch of hydraulic field, and an important component of control technology.
介绍电液比例控制技术在铜电解阴极板自动线冲铆机上的应用，分析了电液比例压力控制系统的设计特点。
This paper introduces the use of electrohydraulic proportional control system to copper electro - cathode board die machine in the automatic product line.
在配气机构方面，电液或电磁控制的全可变气门技术便是其中一种。
The Electro-hydraulic valve actuation(EHVA)in this dissertation is a kind of way for the future engine.
最后，将CAN总线技术引入到该车微电控制系统中来，设计了该车微电控制系统的硬件网络，并完成了电液控制程序的编写。
Finally, CAN-BUS technology is applied to electric control system, hardware network of electric control is designed and programs of electro-hydraulic control are finished.
本论文所取得的相应结果，为今后电液气门技术的进一步研究和开发打下了良好的基础。
The studies and results obtained in this dissertation will make a foundation for further research and development.
可调式电液回转器，属于液压控制技术领域。
The utility model relates to an adjustable electro-hydraulic turning gear which belongs to the technical field of hydraulic control.
作为路面半实物仿真的重要设备，高性能的电液伺服加载设备为高速轮胎的设计、应用提供性能实验数据，为新技术的推广提供可靠的试验资料。
As an important part of hardware-in-the-loop simulation equipments, advanced EHSLS can provide data for new types of high-speed tires' design.
作为路面半实物仿真的重要设备，高性能的电液伺服加载设备为高速轮胎的设计、应用提供性能实验数据，为新技术的推广提供可靠的试验资料。
As an important part of hardware-in-the-loop simulation equipments, advanced EHSLS can provide data for new types of high-speed tires' design.
应用推荐