输入预压、波头、焊接时间、保压、焊接电流等参数。
Input preloading, wave head, welding time, the pressure, welding current parameters.
当电缆的长度增加时，其电缆电阻、电容和泄漏电流等参数也会变化。
Parameters like cable resistance, capacitance, and leakage currents change as cable length increases.
论述了高温直流磁控反应溅射法制备ito透明导电薄膜时氧分压、溅射气压和溅射电流等参数对其光电特性的影响。
The effect on the electrical and optical properties is studied as ITO transparent conductive thin films prepared by DC magnetron reactive sputtering technique with different deposition parameters.
通过实验确定了最佳参数，其中包括：离化电子电流和电压、加速电压、阻止电势、供气压力等。
The optimum parameters, such as electron current and voltage for ionization, acceleration voltage, retarding voltage, gas inlet pressure, were determined by experiments.
额定电流和总电阻等参数均在铭牌上标明。
Rated current and the total resistance and other parameters are indicated on the nameplate.
该断路器通过拨码开关完成整定电流、脱扣时间、瞬动倍数等参数的设定。
Through dial switches the circuit breaker can set rated current, tripping time, instantaneous multiple and so on.
分析了腔镜反射率、量子阱数等参数对阈值电流、输出光功率的影响，并根据理论计算对器件参数进行了优化设计。
The effects of DBR reflectivity and well Numbers on threshold current and output power of bottom-emitting VCSELs were analyzed to design an optimal device structure.
同时给出了其牵引绕组电压、电流等系统主要参数的计算。
The system interface parameters calculation, such as input voltage and cur-rent for traction windings is also presented.
参数检测和带载放电同时进行，单片机控制，可自动检测三相电压、电流、频率等参数。
Parameter test and load discharge can process at one time. It is controlled by CPU, and can automatically test three-phase voltage, current and power ETC.
其参数是通过在系统扰动过程中的发电机电压、电流和转子角等数据而得到的。
The parameters are calculated from the data of small perturbations of the generator voltage, current and rotor angle during system disturbances.
PL 3223提供若干间接参数，依此计算出电压有效值、电流有效值、线电压频率等参量。
PL3223 supplies several indirect parameters, which are used to calculate voltage RMS, current RMS, frequency of the line voltage and so on.
运用正交试验，结合自行研制的焊接电弧动态小波分析仪对焊接电流、电弧电压、焊接速度等主要焊接工艺参数进行了优化研究。
The main welding parameters such as welding current, arc voltage and welding speed have been optimized by the orthogonal test and welding arc dynamic wavelet analysis instrument.
以铝合金MIG焊为例，在每种脉冲模式下，分别改善焊接电流、焊接电压、脉冲频率、占空比等参数进行焊接并采集输出电流波形。
Taking MIG welding as example, under each control modes, the welding parameters such as the welding current, welding voltage, pulse frequency, etc.
通过对激光的电噪声的测量可以监测激光器的诸多参数和特性，如弛豫频率，谱线宽度，阈值电流，模式跳变及输出光功率是否稳定等。
We can monitor many parameters and characteristics by measuring TEN, such as surge frequency, spectrum width, threshold current, mode jump and stability of output light power.
计算出铝合金扁锭的感应器电流、电源频率、功率和能耗等电参数；
The electric parameters such as inductor current, power frequency and energy consumption etc.
研究了焊接电流、焊接速度及焊接电压等焊接工艺参数对A - TIG焊焊缝熔深的影响规律。
The effect of welding parameters such as welding current, welding velocity and welding voltage on A-TIG weld's depth and width has been studied.
在该模型的基础上，讨论了势垒、阳极结的电势降落和电流的放大因子等电参数的变化。
Based on the model, the variations of the electrical parameters such as the potential barrier, the anode junction voltage drop, and the current amplification factor are studied and discussed.
在此基础上分析线路塔型、导线参数、相序排列等因素对不平衡电流的影响。
On this basis, the influences to unbalance current of line tower type, wire parameters and phase sequence arrange are analyzed.
该仪表能够完成对电机的电压、电流、速度等参数进行采集、处理、输出和显示。
It can collect, process, export and display the parameters of motor's voltage, current and speed.
通过参数设定、输入电压相位计算、控制算法实现和开关接口等环节设计，实现了输入电流偏置角动态调整的控制策略。
In order to study the strategy of input current modulation, the simulation model of matrix converter under unbalanced input is built with MATLAB.
该装置具有广泛的通用性，可用工业测控系统进行力、位移、温度、电压、电流等各种参数的检测与变换。
It can be widely used in industrial measure and control systems to measure and transform voltage, current and other parameters with high reliability.
电力系统中常需测量电压、电流、功率因数、有功功率、无功功率和视在功率等参数。
In an electric power system, the following parameters often need measuring: voltage, current, power factor, power, reactive power and apparent power.
为解决原系统所存在的结构合理性、电流断续和参数选择等问题，提供了合理方案和可靠依据。
The rational scheme and reliable basisare provided for solving the problems about the rationality of constructions, current cutting-out and parameter setting existing in the primary system.
测定泵的输入电流、电压、转速、输出流量、输出压力、泵效率等参数，通过回归推断各参数的相关特性。
The input electric current, voltage, rotary speed, output flux and output pressure of the pump were tested. The regression relation of these parameters was deduced.
试验研究分析了感应器结构、电流等工艺参数对电磁场分布的影响。
Some experiments are taken to research the influence of the parameters (inductor current, inductor shape etc.) on the distribution of the electromagnetic fields.
电流、焊接速度、压力等参数都会影响窄搭接焊机在镀锌机组生产中的焊接质量。
Current, welding speed, and pressure are the factors which can influence the welding quality of narrow lap welding machine during the galvanizing unit production.
文中详细论述了剩余电流动作保护装置的参数选用，安装要求，低压电网接地方式及安装施工要求等。
This paper introduces the parameter selection, installation, grounding mode of low-voltage power grid and construction method of residual current operated protective device.
在对镦粗速度、加热电流、镦粗压力等主要工艺参数分析的基础上，建立了工艺过程的优化控制系统。
Based on analysis of main process parameters such as upsetting velocities, heating current, upsetting pressures etc., the optimum control system of process parameters is determined.
通过实验，比较了在焊接电流、通电时间以及电极压力等参数变动时，单相工频点焊机与逆变直流点焊机的焊接工艺性能差异。
With the multi parameters fluctuated, the different of the technology performance between AC spot welding machine and inverter spot welding machine is analyzed.
通过实验，比较了在焊接电流、通电时间以及电极压力等参数变动时，单相工频点焊机与逆变直流点焊机的焊接工艺性能差异。
With the multi parameters fluctuated, the different of the technology performance between AC spot welding machine and inverter spot welding machine is analyzed.
应用推荐