控制器为UC 3846电流型控制芯片。
针对平均电流型控制电路,给出了系统稳定性的设计方法。
The design for the system stability in the average current-controlled switched converter is also discussed.
采用平均电流型控制方式,电源具有良好的稳态和动态特性。
The power supply system has good steady and dynamic characteristics because of adopting average current control mode.
论述峰值电流控制和平均电流型控制的工作原理及电路的主要特点。
The paper presented here describes the configuration characteristic of peak current-controlled and average current-controlled models.
介绍了电流型控制方法的基本原理和特点,分析了斜坡补偿的必要性及方法。
The paper presents the general principle and characteristics of the current code control method, analyzes the necessity and the method of ramp compensation.
本文就其优点作了叙述;对开关电源电流型控制集成器件作了简介;并给出试验电路。
This paper describes its advantages, introduces the current - mode control integrated device for switching power supply, and gives a experimental circuit.
功率电子应用需要输出电压或输出电流的幅值控制,分别称为电压型控制和电流型控制。
Power electronic applications require the amplitude control of output voltage or output current, called Voltage-Mode control and Current-Mode control respectively.
用平均电流型控制原理设计一个APFC电路,并进行了实际测试,证明该平均电流型控制的优越性。
An APFC circuit based on average current mode control is designed and tested. It is indicated that the average current mode control has many advantages.
采用基于UC 3846电流型控制芯片,简化了电流保护电路,避免了推挽变换器工作时磁芯偏磁导致的事故发生。
UC3846 of current mode control is used so that circuit for current limited function is removed and flux imbalance that can cause accident is been avoided.
控制系统采用的是电流型PWM控制方式,能够实现高品质的恒功率能量回馈。
The control system adopts current PWM control mode, and high quality energy feedback with constant power could be accomplished.
以开关信号理论为指导,对电流型CMOS电路中如何实现阈值控制进行了研究。
Guided by the switch signal-theory, how to realize the threshold controlling in current-mode CMOS circuits is studied.
提出了一种为电流型功率放大器所用的新的滑模控制方法。
A kind of new sliding mode control method for current type power amplifier is put forward.
本文提出了电流型逆变器-感应电动机变频调速系统中电机驱动恒功率负载时,系统以最大效率运行的节能控制方式。
This paper proposes an energy saving control mode for current source inverter(CSI) induction motor drive system with the motor driving a constant power load.
针对径向力的控制要求研制了双向电流型线性功率放大器和PID控制器。
The linear power amplifier of current-type and the PIDcontroller is designed for the control of radial force.
提出了一种新的适合于GTR电流型变频器整流器部分的PWM控制方法,推导出了在准圆轨迹PWM控制规律下,整流器输出电压的计算公式和平波电抗器电感量计算的实用公式。
A new PWM control method for GTR current source rectifier is presented. The mathematical formulae that output voltage of the rectifier and inductance of the DC filter are derived.
利用电流信号的阈值易于控制这一特点,对电流型CMOS电路中如何实现阈值控制进行了研究。
Since current threshold values are easy to control, this paper studies how to realize the threshold controlling in current-mode CMOS circuits.
提出了一种新型的双重单端正激式弧焊逆变电源,采用IGBT为开关器件,引入了电流型脉宽调制控制器。
A new double single-ended forward arc welding power inverter with IGBT as power device and current PWM controller is introduced in this paper.
交—直—交变频器按照交流电机电源电压的控制方法的不同,分为电压型和电流型两种。
Pay - Direct - cycloconverter supply voltage AC motor in accordance with the different control methods are divided into voltage-and current-mode two.
设计了一种以电流型PWM控制器UC3842芯片为核心的高频单端反激式开关稳压电源。
A high frequency single-ended flyback switching power supply is designed with current-mode PWM controller UC3842 chip as its core.
提出了三相电流型PWM整流器的一种新型实用的功率因数控制方法。
A new and practical power factor control strategy for three phase PWM current source rectifier was proposed.
本文主要完成了一种基于双极工艺实现的电流型PWM控制器芯片的设计。
This paper research the design to current mode PWM controller IC, it is achieved by bipolar process.
根据KA3525的应用特点,设计了一种基于该电流型PWM控制芯片和单片机控制实现输出电压可调的稳压电源电路。
According to the applied characteristics of the KA3525, a regulated power supply circuit based on a PWM controlled chip and controlled by single-chip processor was designed.
AD 8205型高端电流传感器可以简化检测电路,采用AD 8205和UC 3842电流型PWM控制电路实现PWM可调电流源,电路结构简单可靠,输出电流精度高。
The adjustable current source using AD8205 and current PWM controller UC3842 features such advantages as simplified reliable circuits and high precision output current.
提出一种电网电压不对称情况下抑制三相脉宽调制(PWM)电流型变流器(CSC)直流输出电流二次谐波、减少网侧电流低次谐波的控制方法。
This paper presents a new control strategy to eliminate second harmonic of dc output current in the 3-phase unbalanced network voltage PWM current-source converters (CSC).
本文以并联电流型有源滤波器的数学模型为基础,讨论了有源滤波器的控制方法。该方法由负载电流前馈、电源电流状态反馈和控制延迟补偿组成。
In this paper, the control method of the current-source active filter is discussed, which is made up of the state-feedback and delay compensation control.
本文介绍了开关电源的电流型PWM控制技术的原理及特点,并和传统的电压型控制作了比较。
This paper presents the principle and virtues of a current-mode-control pulse width modulation(PWM), and makes a comparison with traditional voltage-mode-control.
本文介绍了开关电源的电流型PWM控制技术的原理及特点,并和传统的电压型控制作了比较。
This paper presents the principle and virtues of a current-mode-control pulse width modulation(PWM), and makes a comparison with traditional voltage-mode-control.
应用推荐