本文研究了钕铁硼阴极电泳涂装工艺。
The cathodic electrophoresis process for bond NdFeB permanent magnets was studied in this paper.
对影响电泳涂装质量的因素进行了研究。
The influencing factors on the quality of electrophoresis finishing were studied.
磷化技术的开发是为阴极电泳涂装而服务的。
Phosphating technology has been developed specifically for use with cathodic electrocoating.
另外,介绍了阴极电泳涂装生产的工艺维护。
In addition, maintenance of cathodic electrophoretic coating process was described.
介绍了镁合金表面合金化及电泳涂装工艺流程。
The process flows of magnesium alloy surface alloying and electrophoretic coating were introduced.
在电泳涂装过程中这种气体的析出却是不利的。
Gassing is undesirable in the electrocoating process, limiting the throwing power, an important property which will be discussed later.
叙述了分析化验工作在电泳涂装中的重要作用及其要求。
The importance of washing process after electrophoretic coating was described.
探讨了降低电泳涂装设备折旧费,从而降低涂装成本的途径。
The ways to reduce the depreciation allowances of the electrophoresis coating equipments in order to lower the coating costs are discussed.
介绍了新建阴极电泳涂装线在投产前必须要做的一些准备工作。
The preparation needed before the operation of the new cathodic electrophoresis coating production line is introduced.
分析了阴极电泳涂装质量事故的产生原因,并提出了解决措施。
The factors which resulted in the quality accident in cathodic electrophoretic painting were analyzed, and measures were put forwarded to solve the problem.
介绍了新建阴极电泳涂装线在投产前必须要做的一些准备工作。
The preparation needed before the operation of the new cathodic electrophoresis coating production...
该处理剂可直接用于铝件表面装饰或作喷漆、喷塑、电泳涂装的前置镀层。
The agent can be directly used for the surface decoration of aluminum parts, and as the precoatings of spray paint, spray plastics, and electrocoatings.
介绍了阴极电泳涂装工艺管理的主要内容、中心环节、操作技巧及注意事项。
The preparation needed before the operation of the new cathodic electrophoresis coating production line is introduced.
在阴极电泳涂装中,DM阳极隔膜是除去弱酸离子,保证电泳正常进行的特种分离膜。
The DM anode membrane is a polymer membrane specifically designed to remove acetic in electrodeposition coating tanks.
本文对阴极电泳涂装的成膜机理,电泳漆膜质量的影响因素,电泳漆的回收利用及废水处理作了论述。
The film-forming mechanism, factors affecting the film quality, recovery and recycling and sewage disposal in respect with cathodic electrophoretic painting are described in this paper.
阐述了在阴极电泳涂装过程中金属阳极因腐蚀产生的危害,分析探讨了阳极的腐蚀原因及其防护方法。
The harmfulness caused by corrosion of metal anode in electro-coating process was expounded. Corrosion reasons of anode were analysed and its protection methods were explored.
阴极电泳涂装工艺在轿车和小型车生产上被广泛使用,但目前国内在大型客车生产上采用可为绝无仅有。
This article focuses on the difficulties and solutions about using cathode electro-coating in the production of large coach, and the problems to be taken care of in the production.
介绍了超滤器在阴极电泳涂装中的作用、阴极电泳用超滤器的类型、荷电膜超滤器在阴极电泳涂装线中的应用。
The types and functions of ultrafilter for cathodic electrodeposition (CED) painting and the functions of charged membrane ultrafilter for CED have been described.
介绍了从英国引进的汽车驾驶室磷化、阴极电泳涂装线采用国产阴离子型聚丙烯酰胺PHP_(30)处理污水的效果。
In the phosphating and cationic electrodeposition painting line, imported from Brilian, for car driver's cab, a domestically-made anionic polyacrylamide PHP_ (30) has been used for sewage disposal.
前处理就是对铁板、钢板、镀锌板等金属的表面进行清洗、化学处理而使底材易于电泳涂装,从而得到所需的防腐蚀涂层。
Pretreatment is a process which cleans and phosphatizes the surface of steel to get good ED film for good anticorrosion.
通过对两种典型的阴极电泳材料的电压试验、入槽供电方式的选择试验以及程序式分段电压控制试验,证实了阴极电泳涂装过程中电压控制的重要性。
The importance of voltage control during cathodic electrophoresis was proved through voltage tests, choice of methods for introducing current into bath and programmed step test of voltage control.
广泛应用于电镀、涂装、电泳、喷漆等工艺的前处理及后处理工序。
Widely used in electroplating, painting, electrophoresis, painting of the pre-treatment and post-treatment.
介绍了拖拉机钣金件的涂装工艺,并着重介绍了前处理、电泳和烘干过程中的节能方法。
The finishing process of the metal board on tractors is described, focusing on the pretreatment, electrophoresis process and energy-saving approaches during baking process.
介绍了汽车涂装工艺电泳过程中出现的一些常见缺陷,对这些缺陷产生的原因进行分析并阐述其防治方法。
The article introduced a number of common failures emerging during electrodeposition process in automotive painting, analysed the cause and explained their prevention and cure.
肯德基门门喷涂工艺之电泳喷涂,是将涂装漆溶解在电泳溶剂里并通电。
KFC door door electrophoretic coating spraying process, the paint coating is dissolved in a solvent in electrophoresis and energized.
介绍了重型卡车涂装生产线的阴极电泳工艺流程、设备安装、调试过程,并指出了电泳生产过程中出现的问题和解决方案。
The technology and procedure, installation of equipment, and shakedown test of cathode electrophoresis used on the production lines of coating for heavy-duty trucks were introduced.
与浸法涂装不同,电泳沉积在内腔部位的涂膜,在烘干过程中不会被热蒸汽洗掉。
Unlike dip coatings, electrodeposited paint is not washed off in enclosed areas by hot vapors during curing.
着重结合国情阐述了引进技术中用国产原料生产阴极电泳涂料及其涂装时出现问题的处置方法。
It focused on, considering the domestic situation, the production of CED paint by use of imported technology, but the domestic raw materials, and problem-shooting measures during painting process.
着重结合国情阐述了引进技术中用国产原料生产阴极电泳涂料及其涂装时出现问题的处置方法。
It focused on, considering the domestic situation, the production of CED paint by use of imported technology, but the domestic raw materials, and problem-shooting measures during painting process.
应用推荐