一个具有内耗散的电池模型被用来分析电池在最大输出功时的性能特性。
The battery model with the internal dissipation is used to analyze the performance characteristics of an electric battery at the maximum work output.
贝尔彻的电池模型是完全由病毒构成的金属圆盘，看起来就像普通手表电池。
Right now, Belcher's model battery, a metallic disk completely built by viruses, looks like a regular watch battery.
依据离散马尔可夫电池模型理论，模拟出跟踪电池基本行为的离散过程，仿真结果显示模拟过程与理论推导相吻合。
Based on the theory of the discrete-Markov battery model, the fundamental behavior of the battery is simulated. The result shows that the simulated process is consistent with the deduction.
它的模型有一个双面镜像系统。该系统直接把阳光投射进一块小型(1平方厘米大小)光伏电池的光学感应棒上。
Its model involves a two-mirrored system that directs sunlight down an optical rod onto a small (1 square centimeter) photovoltaic cell.
Pyykko博士和他的同事们作了两个版本的电脑模型，来观察铅酸电池是怎么工作的。
Dr Pyykko and his colleagues made two versions of a computer model of how lead-acid batteries work.
另一个模型，“Oorja”，由BP和印度科学院开发，拥有一个内置的电池驱动风扇来使空气对准燃烧室内的木球，从而提高效能。
Another model, the "Oorja", developed by BP and the Indian Institute of Science, has an integrated battery-powered fan to direct air to wood pellets in the combustion chamber, improving efficiency.
通用汽车的风险投资部门总裁乔恩Lauckner说：提高能源密度的整个概念涉及到车辆的种类奖项时他表示，目前还不清楚多少钱，新技术将保存，但“我只想说，这是非常重要，它不 是一该电压电流模型使用的锂锰尖晶石阴极制成的锂离子电池(“尖晶石"指的是三维的原子排列)。
The current model of the Volt uses lithium-ion batteries made with lithium-manganese spinel cathodes ("spinel" refers to the three-dimensional arrangement of atoms in the material).
我还在改良我的基于树布局设计的模型来认识是否能有一种新的方式来制造电池板阵列。
I am improving my tree design model to see if it could be a new way of making panel arrays.
这个模型使用与树木布局模型一样、数量相同的PV(光伏)太阳能电池，因此有同样的输出峰值。
It had the same type and number of PV solar panels as the tree design, and the same peak voltage.
相对论模拟模型预测的铅酸电池产生的电压相当精确。
The relativistic simulations predicted the voltages measured in real lead-acid batteries with great precision.
研究团队改进了这些模型，提升电池储存的电量，而不是依靠安装一块更大的电池。
The model has been modified by the researcher's team to increase the amount of electrical energy it can store - but not by installing a bigger battery.
理想PV电池的模型可以表示为一个感光电流源并联一个二极管。
An ideal PV cell can be modeled as a light-induced current source in parallel with a diode.
他们不只是做模型汽车，还要装上机械装置和电池，用摇控器操控汽车呢。
They not only make model cars, but install mechanical devices and batteries, and use a remote control to control the car.
今年夏末，在科罗拉多州的戈登，燃料电池技术公司VehicleProjects公司计划完成了带有混合燃料电池转换器火车头的模型，这种火车头不产生废气。
Later this summer, fuel-cell technology company Vehicle Projects, Inc., in Golden, Colo., plans to complete a prototype fuel cell–battery hybrid switcher locomotive that creates no emissions.
本周，现代公司展示了BLUEWILL模型车，车顶的太阳能电池可为锂电池充电。
Hyundai showed off a prototype called the Blue-Will this week, with roof-mounted solar cells to help recharge its lithium batteries.
提出了一种最小二乘支持向量机的电池剩余电量预测新模型。
A novel prediction model for remaining capacity of batteries based on least square support vector machine (LS-SVM) was proposed.
米切尔·波维内丽建立模型来预测不同纳米级的太阳能蓄电池的效率。
Povinelli is working on models to predict the efficiency of solar cells that have different nanostructures.
基于质子交换膜燃料电池电堆的能量守恒，建立了在大范围的负载扰动下电池电堆温度的非线性模型。
Based on the energy conversation of proton exchange membrane fuel cell (PEMFC) stack, the nonlinear temperature model of PEMFC stack with the large range of disturbances is developed.
介绍了燃料电池的工作原理及其车辆应用模型，并在此基础上进一步阐述了燃料电池混合驱动汽车的结构与其能量流的控制管理策略。
The principle and the application model of full cell in vehicle are introduced. The structure and energy flow control strategy of fuel cell hybrid vehicle are described.
基于电池系统模型的复杂性，提出了均衡充电智能控制。
Because of the complexity of battery model, intellectualized equilibrium charging system is brought. forward.
该模型考虑了放电深度和放电速率对电池寿命的影响。
This model USES depth and rate of discharge and to estimate battery lifetime.
所建模型适合于所有液体电化学电池。
用参数可分离非线性最小二乘拟合方法，根据少量测量数据较准确地求得了太阳电池双指数数学模型。
Solar cell both exponent mathematical model can be obtained exactly using a few measurement data by the least squares fitting method that parameter can be separated.
首先介绍并分析了固体氧化物燃料电池(SOFC)的工作原理和理论电压模型。
In this paper, the working principle of the solid oxide fuel cell (SOFC) and the theoretic voltage model are introduced and analyzed.
为了进行电池控制设计而为电池输出电压建立模型。
Output voltage of proton exchange membrane fuel cell was modeled for control design.
在传热模型中，除考虑传导和对流换热外，也考虑了电池和空气进气管之间的辐射换热。
Radiation between cell tube and air feed tube and heat transfer by convection and conduction was also included in this model.
介绍了一个建立在向量空间模型上的电池分类系统，提出了一个基于模糊决策的快速完成识别电池容量和曲线一致性的计算方法。
A cell classify system based on vector space model was introduced and a fast fuzzy based algorithm for recognizing capacity and curve of battery was proposed.
本文介绍了几种硅太阳电池工程用模型，这些模型考虑了电池温度和日照强度对输出特性的影响。
This paper presents several engineering analytical models of silicon solar cell, these models take into account cell temperature and solar radiation on out put characteristic.
通过对蓄电池的工作原理以及影响SOC的研究，得出SOC的数学模型，并提出计算蓄电池内阻的公式。
Via researching work principle of batteries and influence SOC, We put forward mathematics model for SOC, and formula for calculating inner resistance of batteries.
通过对蓄电池的工作原理以及影响SOC的研究，得出SOC的数学模型，并提出计算蓄电池内阻的公式。
Via researching work principle of batteries and influence SOC, We put forward mathematics model for SOC, and formula for calculating inner resistance of batteries.
应用推荐