充电控制器必须通过设置补偿这些不同特性。
The charge controllers must compensate for these differences through the charge controller settings.
文章介绍了该节电控制器在现场使用的测试效果。
The paper proposes the actual test effect of this electricity saving controller when used on the spot.
设计了基于CAN总线和LPC 2294的智能家电控制器。
The intelligent home appliance controller based on CAN bus and LPC2294 microprocessor was designed.
对具有温度补偿功能的光伏系统充电控制器的设计与应用进行研究。
The design and application of battery charge controllers with temperature compensation for use in photovoltaic systems are studied.
介绍了密封铅酸蓄电池充电控制器UC3906的工作原理和应用电路。
The operation of integrated circuit UC3906 and its application in sealed lead acid battery charger are described.
带微处理器的充电控制器，功能强、体积小、实用性强，适于推广使用。
The results show that simple parallel charge controller suits for low power photovoltaic system;
针对光伏电池—蓄电池能源系统充电的特点，设计了一种基于DSP的充电控制器。
In response to the charge features of photovoltaic system, one type of charge controller is designed, which is based on DSP.
太阳能发电控制器是专门为太阳能发电系统提供蓄电池充电、放电管理的电力电子装置。
Photovoltaic controller is an apparatus which is exclusively designed to charge or discharge the storage battery in the photovoltaic generation system.
太阳能发电控制器是专门为太阳能发电系统提供蓄电池充电、放电管理的电力电子装置。
Solar power generation controller is an electronic apparatus which is specially designed to charge or discharge the storage batteries in the solar power generation system.
最后在分析光伏离网发电系统工况的基础上，基于单片机进行了太阳能充放电控制器的设计。
Finally, based on analyzing the working states of stand-alone PV generating systems, the design of the solar charging and discharging controller based on microcontroller has conducted.
实际应用表明，该设计可基本实现预定的通信要求，同时家电控制器设计的复杂程度大大简化。
Its practical application indicated that the design could basically satisfy the scheduled communication requirement, and then deeply reduce the design complexity of the appliance controller.
基于该模型开发的抽油机节电控制器已在大庆、胜利、辽河、中原、大港各大油田采油厂投入使用。
The controller of pumping unit based on the model has been successfully used in the oil recovery plants of Daqing, Shengli, Liaohe, Zhongyuan and Dagang oil Fields.
介绍了一种以微处理器PIC16F716为核心的户用型太阳能充放电控制器，阐述了控制器的整个设计过程，对充放电进行详细地分析。
The paper introduced a solar home system controller which took MPU PIC16F716, explained the whole design process of the controller, analyzed charge and discharge in detail.
介绍了一种气压电控式超微量注射控制器的原理与设计。
A kind of electrical controller microinjection controller with air as the pressure medium is described.
电控系统是玉柴电控欧iii发动机的“神经中枢”，包括传感器、控制器、执行器和控制线束。如图37所示。
Electric control system is the "nerve centre" of Yuchai Euro III engine which composes of sensor, controller, actuator and control cable harness. See the Figure 37.
将这种模糊神经网络控制器应用于镍氢电池的充电控制中，证明了算法的有效性。
Such fuzzy neural network controller is applied to the control of nickel hydrogen battery charging, have proved the validity of the algorithm.
分析了原矿井提升机电控系统存在的缺陷并阐述可编程序控制器（PC）在矿用提升机中的应用及效果。
The shortcomings existing in electrical control system in preliminary mine hoist are analyzed, and the application and effectiveness of PC in hoisting shaft are summarized.
针对互联电力系统自动发电控制(agc)，结合模糊控制和遗传算法提出一种新型的PID智能控制器。
A new PID intelligent controller is proposed, combined with fuzzy logic controls and genetic algorithms, for AGC of interconnected power systems.
最后，将这种改进的模糊控制器应用于充电控制当中，设计了一种智能充电系统。
Finally, an intelligent charging system that adopts such improved fuzzy controller is designed in this thesis.
介绍了可编程控制器在转椅力学性能试验机的气-电控制系统中的应用。
This paper described the PLC application in the pneumatic-electrical control of the test of swivel chair mechanical property.
即主传动系统由SCR-D取代原K-F-D系统，电控部分用可编程序控制器PLC取代原继电器-接触器控制方式。
The original K - F - D system was replaced by SCR - D system for main transmission, while PLC was substituted for the original relay contactor control mede.
电控系统由设定器（上位机）、数字控制器、输入通道（位置检测）和后向通道（执行机构）构成。
The control system is composed of setting unit(host computer ), digital controller , input channel (position detector)and output channel (actuating mechanism).
采用了高性能的微控制器MC 68376，运用模块化设计方法，针对工程运用的实际特点，全程按照可靠性设计规范，设计了电控单元的硬件和底层软件。
By using high performance the microcontroller MC68376 according to the modularization method and the reliability design procedure, the hardware and fundamental software of ECU were designed.
采用ABB专用变频器为传动控制器，西门子PLC和触摸屏为上位控制单元的交流复卷机电控系统设计。
The design of an AC rewinder electrical drive system was introduced. The system adopted ABB special converters as drive controller. The upper-control was realized by PLC and HMI supplied by SIEMENS.
众多家电控制正在发生变化，从纯粹的机械，以全面电子化微控制器被纳入设计。
Home appliance controls are changing from purely mechanical to fully electronic as microcontrollers are incorporated into the designs.
本文针对解除管制后的自动发电控制系统(agc)提出了一种新颖的基于T - S模型的模糊逻辑控制器。
A novel fuzzy logic controller based on T-S model is proposed for automatic generation control (AGC) system after deregulation.
电脑控制，变频调速，精选法国施耐德变频器、“邦普”电脑控制器，大大提高整机电控系统可靠性。
Importing transducer from Schneider and Bangpu computer control panel to improve the security of machine electricity-control system.
电脑控制，变频调速，精选法国施耐德变频器、“邦普”电脑控制器，大大提高整机电控系统可靠性。
Importing transducer from Schneider and Bangpu computer control panel to improve the security of machine electricity-control system.
应用推荐