磨损微粒是机械设备磨损的重要信息载体，基于电感测量原理和磨损颗粒的检测要求，提出了电感式传感器的设计。
Wear particle is an important information carrier, on the basis of inductive principle and monitoring requirement of wear particle, the design of inductive transducer is presented.
系统还内置一个设计做工都非常讲究的功率分频器，它有着相对传统而言更低的低频单元串联电感值。
Design work has also built a system is very particular about the power divider, it has a lower frequency than traditional units in terms of series inductance values.
实验结果证明：用最优化方法设计的变螺距线圈，使电感传感器的有效线性输出范围得到了显著的提高。
The results of experiments have shown that the available linear range of output voltage of the optimized inductive transducer with solenoid pitch varying ino.
讨论了位移传感器对电磁轴承系统控制精度的影响，在此基础上提出一种差动电感式位移传感器的设计方案。
Discuss the controlling accuracy of displacement sensor used in AMB system. On the basis of this, a design program of differential conduct displacement sensor is given.
采用有限元法和增量电感公式对一种新型电极结构的电光调制器进行了理论分析和设计。
The characterization and design of LiNbOa optical modulators of novel electrode structures are discussed by using the finite-clement method (FEM) and the incremental inductance formula.
结果表明选用较高电阻率的磁性薄膜和优化磁路设计，是薄膜电感器设计中必须考虑的问题。
Results indi- cates that magnetic films with relatively higher resistivity and optimized magnetic circuit have to be considered in film inductor design.
并在该模型的基础上，分析了耦合器漏感与励磁电感对感应充电系统的影响，设计制作了实验系统耦合器。
Based on this model, the paper analysed the influence of magnetizing inductance and leakage inductance on inductive charging system, then designed the coupler of inductive charging experiment system.
最后对电感器的结构进行了优化设计。
实验结果证明：用最优化方法设计的变螺距线圈，使电感传感器的有效线性输出范围得到了显著的提高。
The results of experiments have shown that the available linear range of output voltage of the optimized inductive transducer with solenoid pitch varying in optimum rule is highly lengthened.
最后分析了磁性元件的特性，变压器，电感的设计和MOSFET开关器件的选型。
Ultimate analysis magnetic elements' characteristic, transformer, inductance design and MOSFET switch component's shaping.
在硬件设计方面，完成了阅读器主电路及功能模块的设计，特别是对D类功率放大器、编码器和电感线圈的设计理论和方法作了详细介绍。
In the design of hardware, the paper details in introducing the reader circuit and function module, especially the theory and method of design in D-type power amplifier, Manchester code and coil.
提出了一种高精度超长位移传感器的理论及设计方法，并在此基础上研制了新颖的电感式位移传感器。
An inductance type of position sensor is presented and its operating theory and design method are also described.
本文利用高压支承变压器高频载波下付边电感与负载电容的谐振特性，设计并研制了有源谐振的ESS。
In the palper, with resonance between the secondary coil of suspension transforMer and capacitance load the active ESS has been developed.
[问：lyshao]PowerEsim设计出的变压器和电感参数还需再次调整吗？
Do those inductance parameters I got from Power Esim design need to be adjusted?
电感是电子电路设计中的重要元件，广泛应用在滤波器、带通放大器、高频补偿等各种电路中。
Inductor is the important elements in electronic circuit design, widely used in filters, band-pass amplifiers and other high-frequency compensation circuit.
基于乘除法的思想设计了一种针对电感传感器的检波方法，该方法不同于常规二极管与单纯乘法的检波方法。
A demodulation method based on multiplication-Division is designed to work for inductance sensor; and it is different from two common demodulation methods, that is diode or only multiplication ones.
本文通过对磁集成技术与薄膜技术的分析，详尽介绍了薄膜电感器和薄膜变压器的设计以及损耗分析，提出了基于薄膜技术设计开关电源中的集成磁件。
This paper analyses magnetic integration technology and thin-film technology, then brings out an idea of making integrated magnetics of switch power supply based on thin-film technology.
分析了理想条件下开关电源电感电流连续的一般规律，并给出了常用变换器在三种工作状态下的调节特性。其中导出的公式可用于变换器电路设计和计算机辅助设计。
The general theories of the inductor currents on three states and the regulating features of common convertors under idea conditions are described and design formulae are derived from the analyses.
根据直线同步电机长定子的齿槽结构特性，设计了一种新型的电感式相对位置传感器。
In accordance with the cogging characteristic of the long stator of the linear synchronous motor, a new inductive sensing system of relative position is designed.
ZP-PS系列插座式电源浪涌保护器是专门为通信、电子设备在操作过电压和雷电感应频繁的场合而设计的。
ZP-PS series socket power surge protector is designed for communication, electronic equipment in the operation of over-voltage and lightning induction frequency.
ZP-PS系列插座式电源浪涌保护器是专门为通信、电子设备在操作过电压和雷电感应频繁的场合而设计的。
ZP-PS series socket power surge protector is designed for communication, electronic equipment in the operation of over-voltage and lightning induction frequency.
应用推荐