利用直流电弧法，合成了含钙的富勒烯金属包合物。
Ca-containing Endohedral Metallofullerenes were synthesized by DC arc discharge method.
全面介绍碳纳米管的制备方法，包括电弧法、热解法、 火焰法等。
The methods for preparing carbon nanotubes including electric arc synthesis, pyrolysis and decomposition of hydrocarbon, and flame synthesis , etc.
碳剥离膜可用交流电弧法或直流电弧法来制备，也可用交直流电弧来做多层膜。
Carbon stripping foils were prepared by AC or DC arc discharge method.
应用技术：采用真空电弧法生产技术，是目前世界上生产石英坩埚最先进的技术之一。
Technology for application: As the producing technology, vacuum arc process is the one of the most advanced technology for producing quartz pots in the world now.
纳米碳管自1991年被发现以来，目前主要的制备方法有电弧法和化学气相沉积(cvd)法。
Since carbon nanotubes (CNTs) have been discovered in 1991, they are mainly produced by arc-discharge evaporation and Chemical vapor Deposition (CVD) method.
本研究提出一种有效制备单壁纳米碳管的半连续氢电弧法，实现了高纯度单壁纳米碳管的大量制备。
A hydrogen arc discharge method for preparing SWNTs was developed in this research, by which high quality SWNTs can be synthesized in a large scale.
本文利用等离子体光谱诊断法对水下焊接电弧温度进行了比较系统的研究。
In this paper the temperature of underwater welding arc is investigated systematically by means of spectral diagnostics of plasma.
应用电弧炉单渣法炼钢的改进工艺，能广泛用于诸多钢种的熔炼，具有较强的实用性、灵活性。
A new technique of applying arc furnace single-slag manner smelting steel can widely be used in varies of steels smelting, and possess preferable practicality and agility.
研究了基于快速原型和金属电弧喷涂(RP -ams)法快速制造金属模具过程中的精度问题。
The accuracy of a rapid manufacturing process for sheet metal stamping with RP and AMS (Arc metal Spray) is presented.
结果表明，这一方法对开关电器电弧开断的定性分析是实用的和有效的。
The result shows that this method is feasible and effective for qualitative analysis of arc interruption in switchgear.
采用温升法测量了电弧的热功率和静特性。
Elevated temperature method is used to measure the thermal power and electrical properties of welding arc.
为了仿真评估电弧炉引起的闪变严重度，对闪变仿真法及其在电弧炉供电系统中的应用进行了研究。
In order to assess the flicker caused by electric arc furnace, the simulation method to assess flicker and its application in electric arc furnace power system was studied.
分析了用电弧渣重熔（ASR）法生产高氮钢的技术优势，认为用ASR法生产高氮钢是目前比较可行的方案。
The arc slag remelting(ASR) process will be a prospective method of manufacturing high nitrogen steels, which has some obvious technical advantages compared with other methods.
为了研究玻耳兹曼图法和谱线绝对强度法对测量结果的影响，讨论了电弧加热发动机羽流的光谱诊断方法，并建立了一套光谱诊断系统。
To determine the difference of the measurement results from different measuring methods, diagnostic principle for arcjet plume was discussed and a set of spectral diagnostic system was established.
分析表明：该法用于直流电弧炉电气特性的建模研究，且进一步提高了预测的准确性。
First, the largest Lyapunov exponent of arc voltage waveform is calculated to confirm the chaotic behavior of arc furnace.
利用分断电弧过程中的电流动态特性，使用移动平均法提取了每次分断电流的燃弧时间。
According to the dynamic behavior of the breaking current, breaking arc duration is extract from the breaking current waveform by using the concept of moving average of statistics.
一步法主要包括电弧放电法、熔盐电解法、模板法和热解金属有机物法等四种。
One-step methods consist of arc-discharge method, electrolytic formation techniques, template-assisted method and pyrolysis of organometallic precursors, etc.
对直流TIG电弧阳极板表面电流密度的测量方法——分离极板法和探针（自制）法进行了分析比较。
The measuring methods of D C TIG welding arc anode sheet surface current density split sheet method and probe (made by ourselves) method were analysed and compared.
介绍了减速机机壳裂纹的电弧冷焊法，采用“短段、断续、分散焊”的工艺，有效地解决了这一难题。
Reducer chassis craze repairing method which adopts short craze welding, interrupted welding and dispersed welding is introduced and effectively solves this difficult subject.
热喷涂处理采用以金属或合金丝材为喷涂原料高速燃气电弧热喷涂法。
The thermal spraying treatment adopts a high-speed gas arc thermal spraying method which takes metal or an alloy wire as a spraying raw material.
法所称的索赔1 ，其中说一步说屏障建设进行使用电弧有淹没消耗焊条。
A method as claimed in claim 1, wherein said step of building up said barrier is carried out by using an arc having a submerged consumable welding electrode.
首先通过测量阻抗轨迹法对异相短路故障的测量阻抗的进行分析，得出牵引网发生异相高阻电弧短路故障时，常规原理的阻抗保护将拒动的结论。
Conventional impedance relay will refuse to trip according to an analysis of measuring impedance by means of impedance locus method when wrong-phase-coupling of traction power supply system occurs.
纳米碳管的制备方法主要有三种：电弧放电法、激光烧蚀法和有机物催化热解法。
The electric arc method is one of the most important methods in synthesizing carbon nanotubes, in addition to laser ablation method and catalytic decomposition of hydrocarbons.
纳米碳管的制备方法主要有三种：电弧放电法、激光烧蚀法和有机物催化热解法。
The electric arc method is one of the most important methods in synthesizing carbon nanotubes, in addition to laser ablation method and catalytic decomposition of hydrocarbons.
应用推荐