介绍了电弧喷涂技术的原理和技术特点。
Theories and specialties are given about arc spraying technology.
介绍大功率二次雾化电弧喷涂设备和技术。
The high-power two-time atomization electric arc spraying equipment and techniques are presented.
介绍一种新型电弧喷涂技术粉末复合电弧喷涂技术。
A new technology-the electric arc spraying technology combined by powder is introduced.
而且电弧喷涂涂层中具有约10%左右的氧化物含量。
In the electric arc spray coating the oxide content was about 10%.
利用高频感应重熔工艺对铁基电弧喷涂铝层进行处理。
The arc-spraying aluminum coating on iron substrate was treated by induction remelting.
电弧喷枪流场特性是影响电弧喷涂质量的关键因素之一。
The fluid dynamics in the jet field of a high velocity wire arc spray gun is one of the key factors to coating qualities.
采用电弧喷涂技术在镁合金az91基材表面制备铝涂层。
Aluminum coating on AZ91 magnesium alloy was deposited by arc spraying.
将电弧喷涂与其他热喷涂技术在涂层性能等方面做了对比。
The arc spraying technology was compared with the other thermal spraying technologies in the ways of coating performance and so on.
探讨电弧喷涂工艺参数变化对涂层组织、抗折弯性能的影响。
The effects of parameters changes of electric arc spraying technology on coating structure and anti-buckling performance were discussed in this paper.
电弧喷涂的其他规范参数由喷涂设备和喷涂材料的特性决定。
Arc spraying of other parameters by the spraying equipment and spraying decide the properties of materials.
基于RP原型的电弧喷涂快速模具制造工艺是一项模具制造新技术。
Arc spraying rapid tooling manufacturing technique based on RP is a new technology of mould making.
高速电弧喷涂镍铝涂层结合强度高，涂层组织致密，是优良的打底涂层。
It was proved that high velocity arc spraying Ni-Al coating is one of best intermediate coatings with high adhesive strength and fine structure.
雾化在电弧喷涂中具有重要的作用，涂层质量很大程度上取决于雾化效果。
Atomization is very important in arc spraying, as the coating quality depends greatly on atomization.
目前电弧喷涂复合涂层主要使用粉芯丝材，但粉芯丝材存在成本高的问题。
Nowadays arc sprayed composite coatings are mostly prepared by cored wires. But the high cost has restricted their application.
介绍了电弧喷涂技术的原理和工艺过程，论述了该技术的主要应用和研究进展。
In this paper, basic principles and technical process of arc spraying are introduced. The main application and current development are also discussed.
目前制备高性能涂层常用的方法有等离子喷涂、电弧喷涂、超音速火焰喷涂等。
There are some methods that are plasma spraying, arc-spraying and hypersonic flame spraying technology to prepare alloy coating with high erosion and corrosion resistance.
介绍了电弧喷涂工艺在大型轴件修复上的应用，展望了电弧喷涂工艺的发展趋势。
The application of arc spray technology on repair of large - size shaft is introduced. And the developing trend of arc spray technology is prospected.
为了提高材料的耐磨、耐蚀性能，并降低生产成本，开发了粉末复合电弧喷涂技术。
For improving wear resistance and corrosion resistance of materials, and decreasing the cost, Arc spray technology combined by powder was developed.
将电弧喷涂技术成功地运用到模具制作上，开辟了电弧喷涂技术应用的一个新领域。
Using successfully of Arcspraying technology on tooling opened a new field of application of Arcspraying technology.
主要研究结果如下：采用电弧喷涂方法制备非晶涂层，涂层中非晶含量最高可达65。
The major results are summarized as follows: the amorphous coatings were prepared by arc spraying technology, the highest amorphous content attainable 65.
研究结果表明：电弧喷涂铝基粉芯丝材制备的涂层具有优良的抗高温氧化和耐腐蚀性能。
The result suggests that the coating of Al-based cored wire prepared by arc spraying has excellent high-temperature oxidation resistance and corrosion resistance.
介绍了电铸与其它工艺的结合，如电弧喷涂、连接技术、微机械技术、快速制模技术等。
The methods of refining grains to improve the electroforming quality were analyzed, including changing power, adding additive, using combined advanced technologies and using ejecting and so on.
电弧喷涂锌、铝制备涂层，广泛用于钢铁构件耐大气、淡水、海水和土壤环境的长效附腐。
Coatings deposited by arc - sprayed zinc, aluminum on the steel substrate are proven to have sufficient corrosion resistance in the atmosphere, freshwater, seawater and soil environments.
表面粗化在电弧喷涂中具有重要作用，涂层质量很大程度上取决于表面粗化预处理的效果。
Surface roughening is very important in arc spraying, as the coating quality depends greatly on its treatment result.
电弧喷涂是热喷涂的主要技术之一，用于液压缸活塞柱体表面修复，可以得到较好的修复效果。
The arc spraying is a kind of important heat spraying technologies. It can be used to repair the damaged surface of hydraulic cylinder piston, and obtains the better effect.
高速电弧喷涂技术是热喷涂技术中的高新技术，高速电弧喷涂枪是实现高速电弧喷涂的关键装置。
High velocity arc spraying is one of the high tech processes in thermal spray devices where the high velocity arc spraying gun is the key equipment.
结果表明：高速电弧喷涂粒子束更加集中，粒子的飞行速度显著提高，粒子的雾化效果明显改善。
The properties and the microstructure of the coating are compared. Results show that concentrated spray plume and high particle velocity are acquired. The quality of atomized particle is improved.
采用电弧喷涂方法在Q 235钢基体上喷涂铝涂层，并用正交设计的方法对工艺参数进行了优化。
Aluminum coatings were sprayed onto the substrate of steel Q235 by arc spraying method and the processing parameters were optimized by orthogonal experimental design.
研究了基于快速原型和金属电弧喷涂(RP -ams)法快速制造金属模具过程中的精度问题。
The accuracy of a rapid manufacturing process for sheet metal stamping with RP and AMS (Arc metal Spray) is presented.
研究了基于快速原型和金属电弧喷涂(RP -ams)法快速制造金属模具过程中的精度问题。
The accuracy of a rapid manufacturing process for sheet metal stamping with RP and AMS (Arc metal Spray) is presented.
应用推荐