探测效率是X射线光电子能谱仪一个很重要的仪器参数。
Detective efficiency is an important instrumental parameter of X ray photoelectron spectrometer.
利用X -光电子能谱仪分析了改性处理后的表面化学性质。
The chemical properties on the surface of the GACs were determined by X-ray photoelectron spectroscopy (XPS).
综述了金属栅网在电子能谱仪的减速透镜和分析器中的应用。
The metal mesh used in retarding lenses and analyzer of electron spectrometer is summarized, Thedesign of retarding lenses can be simp1ified, when Enzel lenses is combined with the metal mesh.
用X射线光电子能谱仪(XPS)研究了仿制的铜红袖的着色机理。
The colour mechanism of imitated copper-red glaze was studied under the use of XPS.
报道了我们自行搭建的扫描探针电子能谱仪的数据获取系统的物理实现。
The physical frame of a home-made data acquisition system of the scanning probe electron energy spectrometer (SPEES) was reported.
报道了对扫描探针电子能谱仪（SPEES）中俄歇电子出射的理论模拟研究。
The simulation of the Auger electron emissions in scanning probe electron energy spectrometer (SPEES) is reported.
再用PHI 550型俄歇电子能谱仪测出上述样品金膜中银的浓度剖面分布。
After that the above samples have been analysed by AES (type PHI 550) and silver concentration profiles in the gold films have been obtained.
采用光学显微镜、扫描电子显微镜和电子能谱仪等方法对开裂齿轮进行了分析。
By means of optical-microscopy, scanning election microscopy (SEM), and election diffraction spectrometer (EDS) etc., the crack of gear was analyzed, the reason of the failure is found.
通过欧杰电子能谱仪，发现水锈膜外层富含碳，在下层富含铁和氧，可能是氧化铁。
From Auger Electron Spectroscopy, it has been found that the outer layer of a rouge film is carbon rich, and the underlying region is iron and oxygen rich, probably iron oxide.
本文应用XPS（X射线光电子能谱仪）研究了真空烘烤对碘化铯光阴极化学状态的影响。
The effects of vacuum-baking on the chemical state of CsI photocathodes are studied with X-ray photoelectron spectroscopy (XPS).
用扫描电子显微镜(sem)和X射线光电子能谱仪(XPS)对钢球磨损表面进行了分析。
The worn surfaces of the steel balls were analyzed by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS).
本文阐述了电子能谱仪的关键部件——电子能量分析器的一种慢性故障现象（沾污）及其消除方法。
This paper presents a method to eliminate the chronic deterioration on the performance of electron energy analyser, which is a key component of the electron spectrometer.
利用X射线衍射仪、X射线光电子能谱仪（XPS）对涂层的相结构及涂层的化学成分进行了分析和讨论；
The coating phase structure and chemical composition were analyzed by X-ray Diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS) respectively;
使用X射线光电子能谱仪(XPS)、X射线衍射仪(XRD)、原子力显微镜(afm)对薄膜的结构进行了分析。
The structural properties of the films were analyzed by X ray photo electron spectroscopy (XPS), X ray diffractometer (XRD) and atomic force microscope (AFM).
采用扫描电子显微镜(sem)、X射线光电子能谱仪(XPS)、傅立叶红外光谱仪(IR)对盘上磨痕进行表面分析。
The surface of the wear scar was analyzed by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Fourier infrared spectroscopy (IR).
X射线衍射仪、电子能谱仪、原子力显微镜和椭圆偏振仪等研究薄膜的击穿电压、介电常数、晶体结构、化学成分、表面形貌及薄膜的折射率。
The breakdown voltage, permittivity, crystal structure, composition, surface and refractive index of the thin films were studied by I-V, C-V, XRD, EDS, AFM and elliptical polarization instrument.
将正电子寿命谱仪的可工作能区分成42个小块。
The workable region for a spectrometer was divided into 42 small regions.
本文对数控车削纯镍时刀具的沟槽磨损问题，应用扫描电镜、电子探针、俄歇能谱仪等进行了探讨。
Using electronic sweep mirror, electronic prober and energy spectrum meter to investigate the groove shape wear of a cutting tool, while numerical controlled turning the pure nickle.
运用能谱技术（EDXA）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）和图像分析仪对涂层成分、显微组织、涂层相结构和组成进行了分析。
The coating composition, microstructure and phases were investigated by energy dispersive X ray analysis (EDXA), X ray diffraction(XRD), scanning electron microscope(SEM)and image analyzer.
计算表明：应用渡越光栅谱仪选择合适的膜片厚度及间距，对于给定的电子能谱，可以得到大的能量接受度和好的能量分辨率。
Calculation shows that large energy acceptance with good resolution can be achieved for given electron spectrum by proper selection of foil thickness and spacing when using TRG spectrometer.
实际建立的系统包括激光器、外光路系统、真空制样室、俄歇能谱仪、电子发射测量仪。
The total system comprise laser, external ray system, vacuum chamber, AES and emission electron surveyor.
用扫描电子显微镜和能谱仪对钨和铜以及不锈钢的热等静压焊接试样的焊接界面进行了分析研究。
The SEM and EDS were used in this paper to analysis the welding interface of the specimens of tungsten and copper, copper and stainless steel made by HIP welding.
建立了一种用带有能谱仪的扫描电子显微镜(SEM -EDXA)测定麦草细胞壁木素分布的方法。讨论了溴化、切片厚度和样品座对定量测定的影响。
A method has been developed for the determination of lignin distribution in wheat straw cell walls by scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM-EDXA) technique.
为解决发电机定子线圈槽的异常升温现象，利用扫描电子显微镜、能谱仪等现代分析手段对300MW发电机定冷水系统不明异物进行了表征和分析。
To solve the problem of abnormal temperature rise of generator stator slots, unknown foreign powder in the 300MW generator stator water cooling system was characterized and analyzed by SEM and EDS.
光学、扫描电子显微镜和透射电子显微镜观察揭示出各生理群的优势菌，并用能谱仪对颗粒污泥的元素组成进行了分析。
From observation of light microscope, SEM and TEM revealed the predominant bacteria of various groups, and element composition of granular sludge was analysed by EDXA.
本文提供了北京正负电子对撞机同步辐射光束线上X射线能谱的首次测量结果，文章对探测器和谱仪系统、测量方法及数据分析予以扼要的描述。
This paper provides the first measurement results of X-ray spectrum at the beam lines of synchrotron radiation. It describes the detector and spectral system, measuring method and data acquisition.
能窗的选择对正电子寿命谱仪的分辨率有决定性的影响。
The resolution of a positron lifetime spectrometer is mainly dependent on selection of the energy window.
采用扫描电子显微镜(sem)、能谱仪(EDS)、X射线衍射仪(XRD)等仪器研究了氧化膜的形貌、组成和相结构。
The microstructure, morphology and components of the oxide film are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy disperse spectroscopy (EDS).
利用扫描电子显微镜和X射线能谱仪对在厦门湾采集的水体悬浮颗粒物进行形态观察和X射线能谱微区元素分析。
Suspended particulate matters in water environment collected from western Xiamen Bay were analyzed using scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy(EDS).
利用扫描电子显微镜和X射线能谱仪对在厦门湾采集的水体悬浮颗粒物进行形态观察和X射线能谱微区元素分析。
Suspended particulate matters in water environment collected from western Xiamen Bay were analyzed using scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy(EDS).
应用推荐