金相组织、扫描电子显微镜分析试验。
Metallographic structure, Scanning electron microscope analysis test.
用掠角沟道技术和透射电子显微镜分析了这种硅化物的结构。
The structure of synthetic silicides has been investigated with the analysis of channeled low Angle emergence and TEM.
利用透射电子显微镜分析了合金在不同条件下的组织形貌特征。
The microstructure characteristics of the alloy after different deformations were analyzed.
对云南会泽大黑山玄武岩铜矿床地气微粒采样，并用透射电子显微镜分析。
Geogas particles have been sampled from Daheishan basalt copper deposit in the Huize county of Yunnan and analyzed by transmission electron microscopy.
采用极化曲线测试结合扫描电子显微镜分析技术，研究了退火对铝合金阳极的活性的影响。
The effects of annealing on the activity of al alloy anode were studied by measurement of polarization curves and analysis of SEM.
利用X-射线衍射分析和电子显微镜分析的结果，确定堇青石窑具的多晶结构和各晶相的含量；
The Polycrystalline structure and the phase composition of cordierite kiln furniture are deter-mined by means of X-ray and electron microscope.
测定了九龙高岭土的可塑性、化学组成、粒度及其分布、白度等，并且做了X—射线和透射电子显微镜分析。
The plasticity, chemical composition, particle size and its distribution, whiteness and so on of jiulong kaolin were measured and analyzed by X-ray and TEM.
这个发现是由一队来自中国和英国的科学家联手做出的。他们用电子显微镜分析恐龙化石的细胞膜，进而判断恐龙的羽毛颜色。
The discovery was made by a team of scientists from China and the UK, who used electron microscopy technology to analyze membranes in fossilized dinosaurs to determine what color the feathers were.
该小组还收集了啄木鸟头骨的计算机断层扫描和扫描电子显微镜分析，在细节上梳理出骨密度不同的各部分如何结合在一起。
The team also gathered computed tomography and scanning electron microscope analyses of woodpecker skulls, laying out in detail how the parts fit together and where bone density varied.
采用等离子喷涂法制备了钽金属涂层，用电子显微镜分析了不同工艺条件下钽涂层的化学成分、表面形貌，测试了涂层与基材的结合强度。
Ta coating was prepared by plasma spraying, which composition and morphology were investigated using SEM, also the bonding strength between Ta coating and Al substrate was tested.
对疏松型纳米氢氧化镁(LN - MH)阻燃剂进行了扫描电子显微镜分析、X -射线衍射分析、元素分析、傅立叶变换红外光谱和粒径测定。
SEM, XRD, elementary analysis and FTIR were adopted to characterize the loose nano magnesium hydroxide (LN-MH), followed by the measurement of particle diameter.
用透射电子显微镜（TEM）分析了所制备的样品。
The samples have been analyzed with transmission electron microscope(TEM).
用扫描电子显微镜和X射线衍射技术分析了微晶玻璃析晶和显微特征。
The crystallization and microstructure of the glass were investigated using scanning electron microscopy and X-ray diffraction technique.
电子显微镜观察与分析表明，晶界上的薄膜状硼化物是导致合金缺口敏感的主要原因。
Analysis and observation under electron microscope indicated that it seems to attribute the notch sensitivity of the alloy to the film-like boride along the grain boundaries substantially.
利用扫描电子显微镜(SEM)分析了阳极氧化后及产品失效后阳极钽芯表面介质膜的微观结构，并对液钽电容器失效机理进行了探讨。
The surface microstructure of anodic tantalum core was analyzed by scanning electron microscope (SEM), and then analyzed the failure mechanism of wet tantalum capacitor.
用电子显微镜和热重分析表征了纯化效果，并初步分析了纯化机理。
The purification mechanism is based on the difference of tensile strength and dispersibility of thin long CNTs with that of carbon fibers.
本文以H- 800型透射电子显微镜为例，介绍了几例故障现象、故障分析及故障排除方法。
Taking H-800 electron microscope for example, this article introduces some faults appearance, faults analysis and method of faults exclusion.
文章简要介绍了日立h- 600型电子显微镜抽真空系统，分析了抽真空程序及其程序控制电路。
The paper simply introduces the evacuation system for model H-600 electron microscope and analyzes the program of evacuation and the program control circuit.
使用扫描电子显微镜（SEM）和能谱分析（EDS）等观察分析磨损钢球表面的磨痕形貌、化学元素和纳米粒子形态。
The surface morphology of wear scar, nanoparticles and its element distribution have been tested and analyzed by scanning electron microscope(SEM) and energy dispersive spectrometry(EDS).
利用电阻炉加热，采用电子显微镜及图象分析仪，研究了近液相线铸造a 356铝合金在二次加热过程中的组织变化。
Using resistance furnace, the structure of A356 aluminum alloy casted by nearby liquidus semi-continuous was studied during remelting by means of electron microscope and image analysis apparatus.
采用X射线衍射（XRD）、透射电子显微镜（TEM）分析手段对样品的物相、结构、形貌进行了表征和分析。
The sample's crystal phase, structure, morphology and the reaction process were characterized and analyzed by using X-ray diffraction(XRD), transmission electron microscopy(TEM).
本文首先对热波电子显微镜成象机理和特性进行了分析。
In this paper, the mechanism and feature of TWEM are analyzed and studied.
采用扫描电子显微镜观察分析了复合材料磨损表面形貌。
The worn surfaces of the composites were observed on a scanning electron microscope.
利用扫描电子显微镜观察分析了聚碳酸酯、尼龙6、低密度聚乙烯的微观断裂行为，并对其断裂起因、断裂过程及断裂形态进行了讨论。
The fracture morphology of PC, PA6, LDPE is analyzed by using scanning electron microscopy (SEM), and the fracture cause, fracture process and fracture morphology are discussed respectively.
运用能谱技术（EDXA）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）和图像分析仪对涂层成分、显微组织、涂层相结构和组成进行了分析。
The coating composition, microstructure and phases were investigated by energy dispersive X ray analysis (EDXA), X ray diffraction(XRD), scanning electron microscope(SEM)and image analyzer.
采用直读光谱仪、显微硬度机、光学显微镜和扫描电子显微镜等分析手段，对失效的汽车发动机活塞连杆总成断裂原因进行了分析。
Aemission spectrometer, micro-hardometer, optical microscope and scanning electron microscope were used to analyze the reason of crack on connecting rod unit assembly for piston of car engine.
采用直读光谱仪、显微硬度机、光学显微镜和扫描电子显微镜等分析手段，对失效的汽车发动机活塞连杆总成断裂原因进行了分析。
Aemission spectrometer, micro-hardometer, optical microscope and scanning electron microscope were used to analyze the reason of crack on connecting rod unit assembly for piston of car engine.
应用推荐