对山东昌乐、海南岛蓬莱蓝宝石及其环带的特征进行了电子探针研究。
By the electronic probe analysis and research on sapphire and its bands both from Shandong Changle and Hainan Penglai, we think that the sapphire from Shandong Changle enriched with bands.
通过扫描电镜、能谱分析仪和电子探针研究了稀土复合变质剂对离心铸造的高碳高速钢轧辊组织和力学性能的影响。
The effects of RE compound modificator on the mechanical properties and microstructure of high carbon high speed steel used for roller ring were investigated by SEM, EDS and EPMA.
利用光学显微镜、扫描电子显微镜和电子探针研究了不同保温时间对钢液中非金属夹杂物的形状、成分和尺寸的影响。
The effects of different holding times on the shapes, compositions and sizes of the inclusions were investigated by using optical and scanning electron microscopes and by the electron microprobe.
利用金相显微镜、X射线衍射仪、电子探针及滑动磨损试验机，研究了合金熔覆层的显微组织及性能。
The microstructure and properties of the composite coatings were investigated by optical microscopy, X-ray diffractometer, electron probe microanalyzer and a skimming wear machine.
利用电子探针对CP线表面黑斑进行了详细的分析研究，指出黑斑产生的主要原因是由于厌氧胶的氧化分解，提出了解决黑斑的方法。
The paper studies the black stains in the surface of CP wire in detail by means of electron probe.
根据显微构造和电子探针结果分析可知，研究区基底变质岩经历过至少三次变形变质作用。
According to microstructural and electron microprobe analyse, it has been determined that at least three metamorphic stages occurred in the basement metamorphic series in the region.
利用电子探针分析方法对贵州某地低碳石煤中钒矿物和价态进行了分析，并对该矿石进行了加压酸浸试验研究。
The vanadium phase and valence state of stone-coal with low carbon in Guizhou province were analyzed by electron probe, and a pressure acid leach experiment was carried out.
采用薄片观察、电子探针、红外光谱等测试手段，对其样品的矿物学、宝石学、谱学特征进行了研究。
The mineralogical, gemmological and spectral characteristics of this kind of jade is studied by using the slice observation, electron microprobe and infrared spectrum.
采用中频真空感应熔炼炉、X射线衍射仪、金相显微镜、电子探针、显微硬度计等实验分析方法，研究了稀土金属铈与低熔点金属锡在钢中的相互作用。
The interaction between the cerium and tin in steel was studied by vacuum induction melting, Xray diffraction, optical microscopy, electronic probe microscopy analysis, and microhardness tester.
在野外调查基础上，通过显微镜下观察及电子探针分析，对矿区主要金属硫化物进行了细致研究。
On the basis of field work, by means of observation of microscope and analysis of electron probe, this paper researches main sulfide minerals of the deposit at great length.
借助JCXA- 733型电子探针仪对浮法玻璃表面呈现的光畸变点缺陷进行了研究。
The spot distortion flaw on the surface of the float glass has been studied, Using the JCXA-733-type electron microprobe.
用光学显微镜、透射电子显微镜以及电子探针等现代材料试验手段对50钢中存在的大块黑色团状异常组织进行了研究和分析。
The abnormal block and black round structure of 50 axletree steel was studied and analyzed using optical microscopy, transmission electron microscopy, electron probe and so on.
利用矿相学、化学分析和电子探针技术等对该矿床矿物特征、矿物生成顺序及共生关系进行研究、探讨。
The mineral character, the mineral arisen sequence and the relation of mineral intergrowth are studied by mineralogy, chalcography, chymic analysis and EPMA, etc.
利用电子探针、磨损试验机等试验手段，研究了微量元素对特殊黄铜的组织和耐磨性能的影响。
Effect of microelement on the microstructure and wear resistance property of special brass have been investigated by SEM, abrasion machine etc.
利用反光显微镜、MPV - 1型显微光度计、JCXA- 733型电子探针、X射线粉晶分析等手段对产在河南祁雨沟爆破角砾岩型金矿中的针硫铋铅矿进行了研究。
Aikinite in the Qiyugou gold deposit, Henan Province has been studied by means of reflecting microscope, MPV-1 Type microphotometer, JCXA-733 Type electron microprobe and X-ray powder analysis.
采用金相、扫描电镜、显微硬度及电子探针显微分析等手段对结合界面区域的组织结构、显微硬度变化及元素扩散进行了研究。
The structure, microhardness change and element change in the zone of bonding interface were studied by means of metallograph, SEM, microhardness and EPMA, etc.
应用显微拉曼光谱和电子探针技术，对云南禄丰出土的元代铜镜腐蚀情形进行研究，确定了铜镜本体及其表面腐蚀产物的成分，并初步分析了元代青铜镜采用的防腐技术。
Here Raman microscopy and electro probe technique were used to identify the corrosion products and their locations on and within of ancient Yuan Dynasty bronze mirror from Lufeng of Yunnan province.
利用电子探针、扫描电镜研究了聚丙烯腈在湿法纺丝工艺中的横截面形貌与皮芯结构。
The cross section morphology and skin-core structure of PAN fiber in wet-spinning are analyzed by the means of electron probe microanalyser (EPMA) and scanning electron microscope (SEM).
利用电子探针及透射电镜研究发现，涂层的表面致密化程度和界面结合情况是影响其抗氧化性的关键因素。
By research with electro-probe microanalyzer(EPMA), we found that the surface density and the interface combination status of the coating is the key factors that effect its anti-oxidation.
采用扫描电镜和电子探针等分析手段研究了粉煤灰火山灰反应残渣的形貌和化学组成。
Morphology and chemical composition of fly ash residues of pozzolanic reaction were investigated by scanning electron microscopy (SEM) and electron probe microanalysis (EPMA).
采用化学成分分析、金相分析、断口扫描电镜及电子探针分析等手段，对4 5钢棒材冷拔断裂的原因进行了分析研究。
The fracture reason of 45 steel bar during cold drawing was analyzed by chemical inspection, metallographic examination, scanning electron fractograph and electron probe analysis.
本研究工作用加工、热处理、金相观察、相分析和电子探针等方法，研究了TZM合金的强化机制。
In this paper, the strengthening mechanism of TZM alloy was investigated. The alloy was processed, heat treated and examined by metallographic observations, phase analysis and electron probe.
通过模拟闭塞腐蚀电池试验研究了钢在热处理前后的点蚀扩展速度，并利用电子探针和扫描电镜分析了钢表面的蚀坑形貌。
The pitting propagation rate was evaluated by simulating occluded corrosion cell (SOCC), and corrosive characteristic of pits was studied by scanning electro microscopy (SEM) and EPMA.
用云母核孔膜、扫描电子显微镜和微电子探针对工艺房间空气中悬浮的气溶胶进行了采集，并对气溶胶的粒径分布、微粒形态及结构、元素成分和捕集机制进行了研究。
Aerosols in the air of a workshop were collected with mica track filters, and the size distribution, shape, structure, elemental compositions and capture mechanisms of aerosols were studied.
用X射线衍射、X射线光电子能谱、X射线电子探针、红外光谱等方法对分子筛进行了结构研究，并用阶梯扫描方法测得其晶胞参数。
The structure of the molecular sieves is studied by means of X-ray diffraction, XPS, EPMA and IR spectrometry, and the unit cell parameters are measured with step scanning technique.
用扫描电镜、电子探针等分析研究了重晶石和固体包裹体矿物的形貌、成分和物理性质。
The morphology, component and physical characteristics of barite and solid inclusion are studied by means of SEM and microprobe etc.
本文在详细的光、薄片鉴定和电子探针分析的基础上，首次对其矿石矿物进行了系统的研究。
Its ore minerals were systematically studied on the basis of thin section and polished section microscope observation and EPMA.
并用金相、X -线衍射分析、电子探针、扫描电镜等方法对试验后样品的腐蚀表面进行了观察研究。
Surfaces of corroded specimens have been examined by means of metallography, X-ray diffraction analysis, EPMA, SEM, etc.
并用金相、X -线衍射分析、电子探针、扫描电镜等方法对试验后样品的腐蚀表面进行了观察研究。
Surfaces of corroded specimens have been examined by means of metallography, X-ray diffraction analysis, EPMA, SEM, etc.
应用推荐