本系统可以实现多路温度信号采集与显示，可以使用按键来设置温度限定值，通过进行温度数据的运算处理，发出控制信号达到控制蜂鸣器和继电器的目的。
The system achieves multi-channel temperature signal acquisition and control. Temperature limit is set by keyboard. The buzzer and relay are controlled by MCU.
与传统的继电器控制比较，PLC控制降低了实习成本，增强了教学效果，提高了学习效率。
Compare with the traditional control with the relay, the PLC control lowers the practice cost, enhances the teaching effect, and increases the study efficiency.
控制与保护开关电器(CPS)是一种新型的用于低压配电与控制系统的多功能、一体化基础元件。
The control and protection switching electric appliance (CPS) is a sort of New-style multifunction and integration component design to low-voltage distribution and control system.
本文阐述了数控与电器控制系统在160卧式镗铣床技术改造中应用的具体设计思想和实现的方法。
This paper describes the design concept and the implementing method of NC and electrical control system in the technical reconstruction of a 160 horizontal boring and milling machine.
本文阐述了数控与电器控制系统在卧式镗铣床技术改造中应用的具体设计思想和实现的方法。
This paper describes the design concept and the implementing method of ZC and electrical control system in the technical reconstruction of a horizontal boring and milling machine.
讨论了铅钙合金浇铸系统机械、液压与电器控制构成、工作原理及设计特点。
The article introduces the sprinkle mould system of lead calcium alloy, and discusses formation, work principles and design characteristics of hydraulic and electric control.
通过测试仪与舵电位计对接，利用继电器阵列控制精密电压源、精密恒流源对舵电位计进行测试，以此来判断舵电位计是否合格。
Collecting helm potentiometer to measure instrument, using of relay array to control precision power supply to test helm potentiometer. and then deciding helm potentiometer is up to standard or not.
其受控对象如窗户状态、电器状态的反馈与控制电路稳定可靠。
The feedback of the remote-control objects such as window condition, the electric device and the control circuit are steady and reliable.
刮水器间歇控制与刮水器控制开关、刮水间歇控制继电器及其在刮水器工作电路中的控制方式有关。
The intermittent control of wipers is related to the control switch, control relay and its control mode of the wipers operating circuit.
通过对LOGO与继电器控制进行比较，说明采用LOGO控制模块具有优越性和较好的价格比，以及在类似工程中应用前景。
Through the comparison of LOGO and relay control, it's clear that LOGO control module has superiority and better price and application prospect in similar engineering.
本文对家用电器模糊控制开发平台进行分析与设计。
This paper Analysis and design the fuzzy control software development platform.
经查是与四通阀线圈串联的控制继电器触点接触不良，电阻增大，致使电压降低。
The check is in the series of coil and four-way reversing valve control relay contact resistance increases, the bad, the contacts the voltage reduced.
由两个主控制继电保护系统对各条500千伏传输线进行保护，该控制继电保护系统上装有一只后备继电器，以实现初级保护与二次保护。
Each 500 kV transmission line will be protected by two primary pilot relaying systems with a backup relaying to achieve primary and secondary protection.
电流互感器通常与电流表、控制电路、保护继电器配套使用。
Current transformers are commonly used in metering and protective relays in the electrical power industry.
设计和实现了一种采用工控机与温度模块、PWM输出卡、固态继电器及相关控制电路搭建的计算机电阻炉温度控制系统。
Temperature computer control system of a resistance furnace is designed with industry person computer (IPC), temperature input module, PWM output card, solid state relay(SSR) and interrelated circuit.
操纵系统与电器控制系统相比，所承担的控制任务非常精简明确，结构上更是要简单许多。
Control system and electrical control systems, mission control borne by the very concise clear, the structure is simple to many.
本产品采用氟利昂压缩机组，以F - 12作制冷剂，并装有压力继电器与温度调节器自动控制。是制造汽水、汽酒的配套设备。
The tank contains compressor using freon F-12 as refrigerant, and temperature regulator for automatic controlling. It is necessary equipment for aerated water and sparkling sine production industry.
它通过将TCP/IP嵌入到电源当中，实现电气设备与互连网的对接，实现电器设备的远程控制，网络控制。
The product has embeded the TCP/IP protocol into the power and realize the electronical facilities to connecting with Internet. , and also realize the remote control and network control.
本产品采用氟利昂压缩机组，以F - 12作制冷剂，并装有压力继电器与温度调节器自动控制。
The tank contains compressor using freon F-12 as refrigerant, and pressure sensor, and temperature regulator for automatic controlling.
本文介绍接近开关传感器与PLC的控制相连接而组成的自动控制系统，它取代操作繁琐的电器继电器控制系统，实现造纸圆筒换卷过程的自动控制。
This paper introduces the autocontrolling system composed with proximity sensor and PLC, this system is instead of relay controlling complicated system to realize cylinder changing automatically.
PLC在机床控制方面与传统的继电器控制系统相比，具有可靠性高、体积小、功耗低、维护简单、开发周期短、价格低等特点。
Compared with relay in controlling lathes, PLC has some advantages such as high reliability, low consumption, small volume, easy maintenance, short developing circle, low price and so on.
介绍了SIEMENS逻辑模块LOGO在行车抓斗电控中的运用，并将LOGO控制与直流继电器控制进行了比较。
Application of SIEMENS logic module LOGO on bucket electrical control in overhead crane driving was introduced.
如果不采用这样一种新的参数或重新参数化，也可能提供两个单独的与两个相反旋转方向相应的控制输入，并通过如一继电器来交替地启动。
Two single control inputs corresponding to two reverse rotation direction can be provided to start the driver via a relay instead of via the parameter.
在正常使用状态下，控制箱与市电相连，控制箱内的浮充电器自动充电，保证启动用蓄电池的正常工作。
Under normal operation, the control cabinet is connected with the urban power, the inside electrical auto charged to ensure normal operation of the storage battery for start.
继电器连接在安装头与灯头之间，并在控制器的控制下接通或断开安装头至灯头的电路。
The relay is connected between the mounting head and the lamp head and for connecting or disconnecting the circuit from the mounting head to the lamp head under the control of the controller.
包括与0 - 60秒可调一次五安培双刀双掷控制继电器延误。
Includes one 5 amp DPDT control relay with 0-60 second adjustable time delay.
包括与0 - 60秒可调一次五安培双刀双掷控制继电器延误。
Includes one 5 amp DPDT control relay with 0-60 second adjustable time delay.
应用推荐