分段补偿电流对电压基准源的温度特性提升效果明显。
It is obvious that piecewise compensation current could significantly improve temperature characteristics of the voltage reference source.
文中设计了一种高阶温度补偿的精确带隙电压基准，使用0。
这种新型电压基准电路适用于锂电池保护芯片，提供检测基准电压。
The novel voltage reference source was applied to a Li-ion battery protection IC to provide various detection voltages.
介绍了一种低压电流模带隙电压基准电路，并提出了一种新颖的启动电路结构。
A low voltage current mode bandgap voltage reference circuit with a novel start-up circuit is designed.
在现代电子线路仪器和设备中，作为电压基准的稳压二极管，有着较广泛的应用。
In the modern electronic circuit instrument and the equipment, took the voltage datum the zener diode, has a more widespread application.
(使用)密电压基准会涉及精度变化和特定范围的整个工作温度范围内的初始精度。
Precision voltage references are available with varying degrees of precision and initial accuracy over some operating temperature range.
该电路采用耗尽型NMOS管作电流源器件，结合负反馈，实现了稳定的电压基准。
A depleted NMOS transistor, which was used as current source, and a negative feedback loop constitute a stable voltage reference.
为此，人们近年来在此领域不断的深入，以期制造出更为稳定的电压基准稳压二极管。
Therefore, the people have gone deep into research constantly in this domain in recent years by the time, hope to make the voltage datum zener diode is stabler.
现代电压基准建立于使用集成晶体管和带状能隙基准、掩埋齐纳二极体和结场效应晶体管。
Modern voltage references are constructed using the energy - band - gap voltage of integrated transistors, buried zener diodes, and junction field - effect transistors.
带隙基准可提供近似零温度系数和大的电源电压抑制比的稳定电压基准，且与工艺基本无关。
Bandgap Reference can provide stable voltage with nearly zero temperature coefficient and larger PSRR, and also are process unrelated.
该带隙电压基准源电路中的深度负反馈运算放大器为低失调、高增益的折叠型共源共栅运算放大器。
A deep negative feedback operation amplifier used in band gap reference is a common source and gate folded cascade operation amplifier with a lower offset voltage and a higher gain.
该公司的主要产品门类涵盖放大器、电池管理、数据转换器、高频、接口、电压调节器和电压基准。
The Company's principal product categories include amplifiers, battery management, data converters, high frequency, interface, voltage regulators and voltage references.
在稳压电路中，作为电压基准的稳压二极管，随着温度的变化，其稳定电压值亦会发生相应的变化。
In the voltage regulator circuit, the zener diode which ACTS as the voltage datum, along with the temperature change, its regulated voltage value also can have the corresponding change.
内置的2.5V电压基准源电路采用自偏置的供电方式，提高了基准电压的精度，而且也降低了功耗。
The built-in 2.5V self-biasing reference voltage source improves the accuracy of the reference voltage, and also reduces power consumption.
本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。
In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.
当基准经历一个温度变化且返回初始温度，它们并非总能获得与初始电压相同的电压。
When references experience a temperature change and return to the initial temperature, they do not always have the same initial output voltage.
其它特性包括：集成缓冲用来驱动基准电压，以及集成完全差动放大器用来缓冲调制器输入并进行电平转换。
Other features include an integrated buffer to drive the reference as well as a fully differential amplifier to buffer and level shift the input to the modulator.
提出了一种新型的低电压、低功耗、工作在亚阈值区的基准电压源。
A new low-voltage low-power CMOS voltage reference operating in subthreshold region is presented.
设计了一种具有良好稳定性和高精度的带隙基准电压源电路。
A bandgap voltage reference circuit with good stability and high accuracy is designed in this pa - per.
在基准电压源的设计中，如何实现高精度、低温度系数是一大难点。
Voltage Reference in the design, how to achieve high-precision, low temperature coefficient is a major difficulty.
其输出的基准信号稳定，与电源电压、温度以及工艺的变化无关。
Reference source outputs a stable reference signal which is independent of power supply voltage, temperature and process.
不同于常规电压求和带隙基准，电流求和是实现低压基准的主要方法。
Current Summing is the basic method to realize low-voltage reference which is different from that of conventional voltage mode.
设计高性能的基准电压源和比较器是模拟电路工程师一直努力的目标。
To design voltage reference and comparator with high performance is a long-term pursuit of analogy IC designers.
微功耗、低工作电压、高电源抑制比是在电源芯片中的基准源设计过程中遇到的主要挑战。
Low power, low voltage and high PSRR are the main challenges in designing bandgap reference for switching regulator.
本文研究了一种采用数字化技术，实现与电网电压同步的基准正弦电路的原理，给出了电路关键参数的设计原则。
A reference sinusoidal circuit based on digital technique and synchronous with the line voltage is investigated. The design principle of the key circuit parameters is given.
基准电压产生电路为带隙电路的扩展，节省了资源并得到了高稳定度的基准电压。
The voltage reference generator was the expansion of the bandgap circuit for saving the resources.
分析基准电压回路的电路设计，通过增大并联电容或供电电源的容量，解决了动态工作下的零漂问题。
Based on the analysis of benchmark voltage circuit design, the zero drift in dynamic condition is solved by increasing capacitance of the parallel capacitor or the power supply.
由此得到温度系数很小的带隙基准电压。
Therefore, we get the bandgap reference voltage with very small temperature coefficient.
基于精密基准电压源lm199的解剖，对其恒温电路作了全面的计算机辅助分析。
An overall computer-assisted analysis of the temperature control circuit for the precision reference voltage source LM199 has been made.
基于精密基准电压源lm199的解剖，对其恒温电路作了全面的计算机辅助分析。
An overall computer-assisted analysis of the temperature control circuit for the precision reference voltage source LM199 has been made.
应用推荐