电化学试验和湿热试验结果表明电解铝硅合金具有良好的耐蚀性。
The results of electrochemical experiments and moisture and hot experiments indicate that the electrolytic Al - Si alloy has excellent corrosion resistance.
采用埋片试验和电化学试验研究了X60管线钢在陕京管线典型土壤环境中的腐蚀性。
The buried tests and the electro-chemical experiments were applied to investigate the corrosion sensitivity of X60 steel in typical soil environments of Shan-Jing gas pipeline.
通过除氧试验、腐蚀试验和电化学试验，研究了抗坏血酸在亚硫酸盐防腐蚀中的作用。
Studies the behaviour of ascorbic acid by carrying out deaeration tests, corrosion experiments and electrochemical tests.
同时本文还对超声波—脉冲电流电化学复合抛光进行了试验探索。
This paper also tried to do some experiments of combined ultrasonic electrochemical polishing.
开展了微细电化学加工技术的试验研究工作，内容包括微细电铸和微细电解加工。
This paper is focused on developing micro electrochemical fabrication processes, including micro electroforming and micro electrochemical machining.
应用电化学方法及腐蚀试验研究了LY 12铝合金表面常温稀土化学转化膜。
The cerium conversion coatings on LY12 aluminum alloy surface under normal temperature was studied by electrochemical methods and corrosion experiments.
利用湿热试验、盐水浸渍试验及电化学测试方法评价了膜的耐蚀性能。
The anticorrosive property of the conversion film was examined intensively by moisture and heating test, salt solution immersion test and electrochemical method.
涂层金属耐腐蚀性的电化学测定方法简便，快速，比盐雾试验和大气曝露等常规方法提供较多信息。
The electrochemical determination of corrosion resistance of coated metals is more easy and simple compared to the salt fog test and atmosphere exposure and may provide more information.
在不同景观区的矿床上方进行地球电化学勘查的方法试验。
Tests were carried out in different landscape areas on the deposits by geo-electrochemical exploration methods.
试验研究了在三维电极体系下，利用电化学氧化反应进行烟气脱硫的技术。
This paper studies the flue gas desulphurization utilizing electrochemical oxidizing reaction in the three-dimensional electrode system.
分析了采用脉冲电解技术制取金属锰的电化学原理，通过试验确定了适宜工艺条件。
The electrochemical principles of manufacture of electrolytic manganese metal by the pulse technique is described.
通过试验测得金属氢化物电极的电化学交流阻抗谱(EIS)，经过分析得到该电极的等效电路图。
Electrochemical impedance spectra (EIS) of a metal hydride electrode were interpreted by means of an equivalent circuit.
试验结果表明：辅以超声波作用的电化学技术可以在常温下快速去除不锈钢表面的高温热处理致密氧化皮，恢复了不锈钢的金属色泽表面。
The results show that the electrochemical technology coupled with ultrasonic actions can remove oxide films rapidly at room temperature and renew the metallic luster of stainless steel.
利用电化学阳极溶解原理，提出一种新型脉冲电化学光亮刻字技术，设计了工装，并以轴承为例进行了刻字试验。
A new lettering technology is put forward based on the electrochemical dissolving principle of anode, and the equipment for lettering is designed and lettering on bearing is tested.
通过盐雾试验、扫描电镜、电化学测试等手段，研究了该钝化膜的耐蚀性及耐蚀机理。
Corrosion resistance and mechanism were studied by salt spaying test, SEM and electrochemistry tests etc.
采用动电位极化和电化学阻抗试验方法，研究了温度和溶解氧对5083铝合金在海水中腐蚀电化学性能的影响。
Potentiodynamic technique and electrochemical impedance spectroscopy (EIS) were used to study the effect of temperature and dissolved oxygen on the corrosion performance of alloy 5083 in seawater.
本工作通过电化学，恒载荷应力腐蚀和再钝化试验，对碳钢在碱溶液中的应力腐蚀破裂进行了研究。
The stress corrosion cracking(SCC) of carbon steels in aqueous alkali was studied by electrochemical technique, stress corrosion test under constant load and repassivation test.
采用SEM、电化学、以及盐雾试验和湿热试验等其它方法对封孔材料与效果进行了评价。
The sealing materials and sealing efficiency was studied by means of SEM. electrochemical salt spay test and hot-humid test.
不同条件下电化学处理浮选的试验结果表明：电化学浮选脱硫优于常规浮选脱硫和抑制剂脱硫。
The flotation experimental in the different condition indicates that coal electrochemical flotation is better than flotation and depressant flotation.
采用化学和电化学加速腐蚀试验方法对6种不锈钢的耐点蚀和缝隙腐蚀性能进行了评价。
Using accelerated chemical and electrochemical corrosion testing methods, the resistance to pitting and crevice corrosion behavior for six stainless steels were evaluated.
应用拉伸试验和慢拉伸试验，研究X70管线钢电化学充氢后材料拉伸性能的变化。
Tensile tests and slow strain rate tests (SSRT) are used to investigate the mechanical behaviors of X70 pipeline steel after electrochemical hydrogen charging.
对电化学不锈钢着色工艺进行试验研究，提出溶液再生调整公式。
Liquid recycle formula is given through tentative study on electrochemical coloring technology on stainless steel.
通过高电位镁阳极的熔铸及成型工艺中的净化技术研究，对试验样品进行了化学成分和电化学性能测试。
The purification technology of Mg-Mn alloy sacrificial anode was studied and electrochemical properties and chemical composition of samples were tested.
利用球盘磨损试验机和电化学综合测试仪研究了IBED膜层的摩擦学性能和电化学腐蚀特性。
The wear resistance and electrochemical corrosion properties of IBED coatings were investigated with ball-on-disk wear tester and electrochemical equipment, respectively.
将黄铜片用上述三种溶液钝化处理后，通过湿热加速试验、硝酸点滴试验、盐水浸泡试验及电化学测试对耐腐蚀性进行了研究。
The corrosion resistance of samples after passivation is studied in the experiment by humid-air accelerated corrosion test, nitric acid titrating test and the brine dipping test.
试验表明，采用此工艺来抛光铝材获得的综合效果优于酸性电化学抛光和传统碱性电化学抛光，是一项有应用前景的新工艺。
Results showed that the polishing effect was improved in alkaline bath with PEG as brightener, and the use time of bath was prolonged with sodium tartrate as stabilizer.
在室内采用LPR 电化学法和转轮试验法对缓蚀剂的膜持久性进行了评价。
In laboratory wheel-box testing and LPR method were used to test the inhibitor film persistence.
实验室试验结果表明，地电化学法地浸采铀是可能的。
The test result has shown that it is possible using the geoelectric chemistry method in in-situ leaching of uranium.
采用浸泡、电化学、模拟试验以及拉伸试验对冷轧厂电镀锌机组不锈钢紧固螺栓在现行工艺条件下遭受严重腐蚀进行了研究。
The severe corrosion of stainless steel fastening bolts on Electrolytic Galvanizing Line(EGL)in cold strip mill plant under current working conditions has been studied.
试验结果表明：影响砂蚀磨损性的主要因素为电化学性能和硬度。
The results show that the main factors of corrosive wear are electric chemistry and hardness.
应用推荐