研究人员已经尝试几种类型的电化学涂料，观察他们是否能提高导电性，但涂层往往打破迅速或不留贴上电极。
Researchers have tried several types of electrochemical coatings to see if they could improve conductivity, but the coatings often break down quickly or fail to stay affixed to the electrodes.
叙述了涂层金属耐腐蚀性的几种电化学测定方法，例如直流电阻法、交流阻抗法、电位时间法、充电曲线法。
Several electrochemical determination methods to test the corrosion resistance of coated metals were described, such as DC resistor, AC resistor, potential time and charging curve.
应用电化学方法研究了磷酸锌在水溶液和醇酸涂层中的缓蚀性能和缓蚀作用机理。
The difference of inhibition mechanism of zinc phosphate in aqueous solution and in alkyd coating has been studied by using electrochemical techniques.
采用钛基钌铱铑复合涂层作为阳极，以硝酸铈和硝酸铵作为电解液，电化学法制备二氧化铈超细粉体。
Cerium dioxide ultrafine powder is prepared by electrochemical method using composite coating of In-Ru-Ir as anode, cerous nitrate and ammonium nitrate as electrolyte.
研究了埋地管道体系的等效电路模型，为将电化学理论应用于管道涂层缺陷检测打下了坚实基础。
Equivalent circuit model corresponding to buried pipeline system is analyzed, which laid firm foundations of electrochemistry theory application to the detection of pipeline coating faults.
采用CS300P型电化学腐蚀工作站检测了梯度涂层的耐蚀性能。
The corrosion resistance of the gradated coating was tested using CS300P electrochemical corrosion workshop.
涂层金属耐腐蚀性的电化学测定方法简便，快速，比盐雾试验和大气曝露等常规方法提供较多信息。
The electrochemical determination of corrosion resistance of coated metals is more easy and simple compared to the salt fog test and atmosphere exposure and may provide more information.
综述了电解海水用金属氧化物涂层阳极的研究现状和发展趋势，以及该阳极的电化学特性与微观组织结构的关系。
The recent status and trend of the development of metal oxide coated anode are reviewed with relationships between its electrochemical properties and microstructure discussed.
最后，利用电化学方法研究了在不同腐蚀环境下混凝土保护涂层对钢筋锈蚀行为的影响。
Lastly, the influence induced by concrete protective coating on reinforcement corrosion is discussed using electrochemical method.
利用电化学阻抗(EIS)技术研究了含有锌铬黄防锈颜料的环氧树脂涂层的耐蚀性能。
The resistance to corrosion of an epoxy coating containing the pigment of zinc chrome yellow was studied using electrochemical impedance spectroscopy (EIS).
通过扫描电镜(sem)、腐蚀电位和电化学阻抗谱(EIS)等方法对改性聚氨酯的富锌涂层进行了表征。
The modified waterborne polyurethane zinc-rich coating was characterized by scanning electron microscopy (SEM), corrosion potential test and electrochemical impedance spectroscopy (EIS).
用电化学阻抗谱研究了丙烯酸系乳胶作为混凝土添加剂或钢筋表面涂层时对钢筋腐蚀行为的影响。
Acrylic emulsion was introduced into steel reinforcing concrete as concrete admixtures or rebar coatings in order to prevent steel reinforcements from corrosion.
利用电化学阻抗谱（EIS）技术研究了含有锌铬黄防锈颜料的环氧酯漆涂层的耐蚀性能。
The resistance to corrosion of an epoxy coating containing the pigment of zinc chrome yellow was studied using electrochemical impedance spectroscopy (EIS).
本文阐述了利用复合涂层与外加电流电化学保护相结合的方法，对已运行的旧的、腐蚀较严重的输水管道进行防护。
This paper describes the united anticorrosion methods of coatings and impressed current electrochemical protection, which offers protection to old, badly corrosion water-carried pipeline.
涂层均采用电化学沉积技术制备。
Both coatings were made using electrochemical deposition technology.
采用电化学方法研究了两种常用涂层—环氧沥青涂层和环氧铝粉涂层在3。
Corrosion behaviors of two kinds of common used coatings–bituminous epoxy coating and epoxy aluminum coating immersed in 3.
针对不同的涂层体系，通过模拟其在不同腐蚀环境中的失效过程，获得大量的电化学交流阻抗测试数据。
By simulating the failure process of coating in different corrosion environment, a large number of electrochemical impedance test data has been collected.
利用电化学交流阻抗方法研究了铝镁阳极型强屏蔽涂层的电化学阻抗谱特征。
The EIS characteristics of an anodic type anticorrosion coating prepared with Al-Mg alloy were studied.
阳极的电化学活性表面积随涂层中氧化物的成分变化而呈振荡变化；表面活性点数目随制备温度上升而下降。
It was shown that the electrochemical active surface area of the oxide anodes oscillates with IrO 2 content in deposits and decreases with increasing of the preparation temperature.
以金属作为基底，环氧树脂作为涂层材料，采用电化学阻抗谱技术研究表面未经处理、经硅烷处理和经磷化处理试样的环氧涂层酎蚀性能。
The anticorrosion behavior of untreated, silane treated and phosphating treated metal surface on metal is studied, and the epoxy resin is used as coating.
通过实际环境腐蚀试验和电化学测试，研究了粉末渗锌涂层和达克罗涂层在不同水环境中的耐蚀性能。
Corrosion resistance of zinc impregnation and dacromet coating was studied by environmental corrosion test and electrochemical measurement techniques.
利用电化学阻抗谱方法对FC柔性陶瓷耐磨耐热重防腐蚀涂料中防锈颜料对涂层耐蚀性能的影响及其机理进行了研究。
Using EIS, the influence of the addition of rust protective pigment on the corrosion performance of FC flexible ceramic wear-resistant coating was studied.
结合电化学阻抗、涂层体积电阻率及涂层形貌特征，拟定了一种无溶剂环氧涂层老化多因素综合评价方法。
EIS, coating's volume resistivity and coating's appearance feature were integrated for establishing a solvent-free epoxy coating aging comprehensive evaluation method.
研究结果表明，单纯盐雾老化对涂层表面形貌和结构形态没有产生明显影响，因此，盐雾老化25周后涂层仍具有较高的电化学阻抗。
The surface topography and structure and morphology of the coating changed a little after 25 weeks salt fog exposure. As the result, the coating resistance hold high over the period of 25 weeks.
利用斑点试验、点蚀试验、电化学测试及扫描电镜等方法 ，研究了熔敷温度、保温时间和稀土添加量等工艺参数对热熔敷法制备的玻璃涂层耐蚀性的影响 ，探讨了添加稀土提高玻璃涂层耐蚀性的机理。
The impact test, the thermal shock test and the scanning electron microscopy were used to investigate the effect of rare earth oxide on the adhesiveness between the glass coating and the base metal.
利用斑点试验、点蚀试验、电化学测试及扫描电镜等方法 ，研究了熔敷温度、保温时间和稀土添加量等工艺参数对热熔敷法制备的玻璃涂层耐蚀性的影响 ，探讨了添加稀土提高玻璃涂层耐蚀性的机理。
The impact test, the thermal shock test and the scanning electron microscopy were used to investigate the effect of rare earth oxide on the adhesiveness between the glass coating and the base metal.
应用推荐