研制了用微机控制的电化学测试分析系统。
Develops a electrochemistry measuring analysis system controlled by microcomputer.
提出电化学测试分析多酚类化合物的可能性。
The possibility of using this electrochemical reaction for polyphenolic compound analysis is proposed.
交流阻抗技术作为一种重要的电化学测试方法目前被广泛应用。
AC impedance technology is a important electrochemical measure method that be used extensive now.
电化学测试结果显示稀土元素掺入有效的提高了材料的循环性能。
The results of electrochemical testing indicated that doping rare earth elements can improve the cycle performance of the material.
用电化学测试技术研究了碱性溶液中卤素离子对铁阳极过程的影响。
The influence of halide ions on anodic process of iron in alkaline solutions has been studied by electrochemical techniques.
利用湿热试验、盐水浸渍试验及电化学测试方法评价了膜的耐蚀性能。
The anticorrosive property of the conversion film was examined intensively by moisture and heating test, salt solution immersion test and electrochemical method.
通过电化学测试方法研究了脉冲真空渗氮防腐层及裸样的抗腐蚀性能。
The corrosive behavior of Pulse Vacuum Nitriding coating and plain sample were investigated by an apparatus of electrochemical measurement.
电化学测试表明该配合物的氧化和还原峰电位同配体相比向高电位方向移动。
The oxidation potential and reduction potential of the title complex shift to higher potential compared with those of the pure ligand.
作为电化学测试的初步应用，建立了基于电化学测试方法的电池分析模型系统。
Finally, an analytic PEMFC model based on electrochemical methods was constructed as a simple example for the application of electrochemical techniques.
通过盐雾试验、扫描电镜、电化学测试等手段，研究了该钝化膜的耐蚀性及耐蚀机理。
Corrosion resistance and mechanism were studied by salt spaying test, SEM and electrochemistry tests etc.
采用电镀法在铜箔上制得了金属锡电极，用作锂离子蓄电池阳极材料进行了电化学测试。
The metal tin electrodeposited on cupper foil was used as anode material of lithium-ion batteries.
研制了服役黄铜管腐蚀电化学检测系统，在模拟循环冷却系统中对黄铜管进行电化学测试。
A electrode system for detecting the corrosion of brass tubes in service is made. Brass tubes in simulated circle cooling system are studied with the electrode system.
介绍了一种双路高阻抗电化学测试前置放大器的电路设计原理、元件选择、安装调试及其应用。
This paper introduces the circuit design principle, component selection, installment, testing and application of a two-way impedance electric chemical test pre-placed magnifier.
在氯化钠溶液中的电化学测试表明，聚苯胺膜的存在可以显著地提高低碳钢的耐腐蚀性和抗点蚀能力。
The electrochemical test in sodium chloride solution demonstrated that the coating can improve the anticorrosion capacity, especially the resistance to pitting of low carbon steel.
通过实际环境腐蚀试验和电化学测试，研究了粉末渗锌涂层和达克罗涂层在不同水环境中的耐蚀性能。
Corrosion resistance of zinc impregnation and dacromet coating was studied by environmental corrosion test and electrochemical measurement techniques.
选用典型的二氧化钛纳米超亲水薄膜，用扫描探针显微镜(SPM)和电化学测试系统进行一般性的表征。
A typical nanostructured titania super hydrophilic film was chosen for general characterization employing a Scanning Probe Microscope (SPM) and an electrochemical measurement system.
采用焊接热模拟、电化学测试、扫描电镜、X射线衍射等方法研究了热循环对喷瓷管道瓷层耐蚀性的影响。
The influence of thermal cycles on the enamel coating corrosion resistance was investigated by Weld Thermal Simulation, Electro chemical Technique, SEM and XRD.
本文以电化学测试技术对“栲胶型带锈防锈剂”的主要组分——栲胶在钢铁表面的防锈作用机理进行了研究。
This paper conducts a research on the rust-prevention mechanism of the tannic extract applied on the surface of ferrous metals by using testing technology of electrochemistry.
利用循环伏安、恒电位阶跃、电化学阻抗等电化学测试技术研究了电结晶初期以及电沉积过程的电化学行为。
The electrodeposited behaviours in the initial stage and deposited process were investigated by cyclic voltammetry(CV), chronoamperometry(CA), electrochemical impedance spectroscopy(EIS).
采用XRD、SEM、TG-DSC、激光粒度分布以及电化学测试等手段对该材料进行了结构表征和性能测试。
The crystal structure and the electrochemical performance were characterized by XRD, SEM, TG-DSC, laser particle-size distribution measurement and electrochemical performance testing.
电化学测试结果表明由于噻吩单元的引入，卟啉聚合物和小分子染料的能隙都降低了，从而有利于电荷的注入和传输。
Electrochemical measurement displayed that the band gaps of the polymers as well as porphyrin dyes were reduced by introducing thiophene units, thus improved the charge mobility.
中性盐雾、电化学测试等腐蚀性能试验结果表明，钛盐钝化溶液所获得的蓝色钝化膜，其耐腐蚀性能更优于铬酸盐钝化膜。
Corrosion resistance of the blue passivation film obtained in titanium salt solution was superior to that of the chromate passivation.
电化学测试表明，快速凝固处理后合金的活化性能不变，循环稳定性得到显著改善，但其放电容量和高倍率放电性能有所降低。
The electrochemical tests indicated that the melt-spun alloys showed a good activation property and much better cycling stability, but lower discharge capacity and high-rate dischargeability.
将黄铜片用上述三种溶液钝化处理后，通过湿热加速试验、硝酸点滴试验、盐水浸泡试验及电化学测试对耐腐蚀性进行了研究。
The corrosion resistance of samples after passivation is studied in the experiment by humid-air accelerated corrosion test, nitric acid titrating test and the brine dipping test.
采用电化学测试技术，以实验室制备的高酸原油催化裂化气提水为腐蚀介质，研究了常温条件下该腐蚀介质对如钢的腐蚀行为。
Electrochemical methods were applied to investigate the corrosion of A3 steel in FCC stripper water prepared in the laboratory. All experiments were conducted under ambient temperature.
在铈盐溶液中用阴极电解的方法沉积铝合金铈转化膜，用电化学测试、腐蚀实验、SEM和EDAX等分析手段研究了转化膜的性能。
Electrochemical measurements, corrosion tests, SEM and EDAX were used to investigate forming cerium conversion coatings on aluminum alloys in cerium salt solutions by cathodic electrolysis.
利用斑点试验、点蚀试验、电化学测试及扫描电镜等方法 ，研究了熔敷温度、保温时间和稀土添加量等工艺参数对热熔敷法制备的玻璃涂层耐蚀性的影响 ，探讨了添加稀土提高玻璃涂层耐蚀性的机理。
The impact test, the thermal shock test and the scanning electron microscopy were used to investigate the effect of rare earth oxide on the adhesiveness between the glass coating and the base metal.
利用环氧树脂胶粘剂粘结软质聚氯乙烯作为金属板材的内衬，通过电化学阻抗测试分析了聚氯乙烯内衬耐酸耐碱性能。
Soft PVC cemented with epoxy adhesives was used as the inside lining of the metal plate and its anti-corrosion performance was analyzed through the electrochemistry impedance test in this article.
利用环氧树脂胶粘剂粘结软质聚氯乙烯作为金属板材的内衬，通过电化学阻抗测试分析了聚氯乙烯内衬耐酸耐碱性能。
Soft PVC cemented with epoxy adhesives was used as the inside lining of the metal plate and its anti-corrosion performance was analyzed through the electrochemistry impedance test in this article.
应用推荐