电化学加工的电源输出特性在很大程度上影响着电化学加工的加工效果。
The output properties of the power supply have great effect on ECM process.
加工电源的频率、波形等输出特性在很大程度上影响微细电化学加工的效果。
The frequency, wave shape and the related properties of the power supply have great effect on micro ECM process.
基于电场理论对固定阴极电化学加工的研究提出了一种新的分析和处理方法。
In the paper, a new idea based on electromagnetic theory is advanced to study the ECM with fixed cathode.
开展了微细电化学加工技术的试验研究工作，内容包括微细电铸和微细电解加工。
This paper is focused on developing micro electrochemical fabrication processes, including micro electroforming and micro electrochemical machining.
金属电化学线切割加工技术是利用电化学加工原理进行金属切割的一种新加工工艺。
Metal wire cut electrochemical machining (MWEM) technology is a new metal cutting machining method that based on the principles of electrochemical machining.
研究超高频群脉冲(UGP)电化学加工中脉冲电压对底部间隙、侧面间隙和极间流场的影响。
Investigates influences of pulses on the bottom gap, the side gap and the electrolyte flow field in ultra-short group pulses (UGP) electrochemical machining.
[17] 金蕾，李荻。 钛合金化学铣切及电化学加工[J]。稀有金属材料与工程，1989，（2）：66-71。
JIN Lei, LI Di. Chemical milling and electrochemical machining[J]. Rare Metal Materials and Engineering, 1989, (2): 66-71.
实验结果论证了电化学加工各种可变参数对去除齿坯金属层厚度的影响程度，为提高齿轮电化学加工精度提供了重要的理论依据。
The experiments and results demonstrate that various sorts of alterable parameters of electrochemical process have some effects on removing metallic layer of semifinished product of gear, providing…
给出了脉冲电化学加工极间平衡间隙的数学模型，并据此讨论了高频群脉冲电化学加工中，电源主脉冲频率与平衡加工间隙的关系。
Based on the model, the relationship between the main pulse frequency of supply power and the balanceable inter-electrode gap is discussed.
提出齿轮的表面质量对其使用性能和寿命有着极为重要的影响，并详细论述了脉冲电化学机械齿轮光整工艺，及其加工后的齿轮的表面质量特性。
This paper points out that a gear's surface quality has important influence on its employment performance, and pulse-electrochemical mechanical finishing in gear machining is discussed in detail.
实验表明，脉冲电化学机械抛光是一种有效的镜面加工方法。
The experiments of polishing show that it is an effective mirror processes.
对脉冲电化学光整加工（PEFM ）中所采用的一种电解液的伏安特性进行了实验研究。
The volt ampere properties of electrolyte in pulse electrochemical finish machining (PEFM) are investigated in this paper.
在分析研究脉冲电化学光整加工原理的基础之上，结合实际进行了实验设计。
Based on analyzing the mechanism of pulse electrochemical finish machining, a practical experiment is designed.
极间间隙是对脉冲电化学光整加工具有重要影响的工艺参数，保持极小的极间间隙加工，可以提高工件的表面光泽度以及加工的尺寸精度。
Interelectrode clearance is one of the most important parameter of it, keeping minimal clearance while machining will improve the part's surface gloss and size accuracy.
提出了基于扫描离子电导显微术(SICM)的电化学微细加工方法。
The method of electrochemical micro-process based on scanning ion conductance microscopy (SICM) is developed.
阐述了脉冲电化学光整加工原理。
The principle of pulse electrochemical finish machining (PECFM) is discussed.
介绍了一种特殊齿形的内齿的电化学仿型加工，介绍了相关的工装夹具设计，工具阴极设计和修正以及加工工艺参数。
This paper introduces electrochemical copying method for inner teeth machining as well as clamping apparatus and the tool cathode design. In addition, the technological parameters are given.
齿面经过脉冲电化学光整加工后表面粗糙度低、微观几何形貌平滑，不仅使齿轮寿命大幅度提高而且工作噪音也大幅度降低。
The lower surface roughness and smooth microform by electrochemical finishing not only enhance highly the life of gear, but reduce the noise.
研究了电化学机械加工轴承滚道的表面特性，并同传统超精加工进行了系统的分析比较。
The surface characteristic of the raceway of bearing after electrochemical mechanical machining(ECMM) is measured and analyzed.
其结果对进一步开展这方面的研究工作具有指导意义，在进一步深入开展研究电化学体硅微加工技术时，可有望成为实现硅深孔列阵加工的新技术。
The consequences are benefit to Silicon electrochemical micromachining technology and the technology will be hopeful to become an new technology about Silicon deep-holes etching technology.
论述脉冲电化学光整加工特点，研究脉冲电化学光整加工机理，根据光整加工原理进行实验设计。
Based on the characteristics about pulse electrochemical finish machining (PEFM), its mechanism is studied. According to finish machining principles the experimental design is carried out.
微细电化学线切割加工是最近出现的一种微细加工新方法。
Wire electrochemical micromachining(WEMM) is a recent new method for micro-machining.
在本文中，提出了一种新型的光整加工方法—电化学机械复合光整加工(ECEF)，并详细的论述了其加工原理。
In this paper, a new finishing machining method - Electrochemical Mechanical finishing (ECEF) is put forward, and the mechanism of ECEF is explained in detail.
通过界面双电层电容值的变化来解释脉冲电化学光整加工提高精度的根本原因；
The reason for the improvement of precision by the EP is the change of double layer capacity value.
在上述研究的基础上，结合螺旋锥齿轮的精切齿原理及特点，探讨了脉冲电化学光整加工在螺旋锥齿轮上的应用模式。
It is discussed the application mode of PECF on the spiral bevel gear based on the research above and the principle and characteristic of precision cutting of spiral bevel gear.
本文基于电化学腐蚀原理，制备微细电化学线切割加工中使用的微米尺度线电极。
Based on electrochemical etching principles, the paper fabricated the micrometer scale wire electrodes used in WEMM.
为了满足螺旋锥齿轮等大型零件的脉冲电化学光整加工的要求，设计了高频、窄脉宽、大电流的脉冲电源。
To meet with the requirement of PECF finishing, pulse power source with high frequency, narrow pulse width and high current is designed.
从加工原理出发，分析了实现电化学微加工的前提条件。
This paper addressed the important factors that were necessary for achieving EMM based on its fundamental principles.
从加工原理出发，分析了实现电化学微加工的前提条件。
This paper addressed the important factors that were necessary for achieving EMM based on its fundamental principles.
应用推荐