用电加热的，则不须增加。
我们研制了一台结构简单的纵向放电加热的铜激光器。
A pure copper laser of simple structure with longitudinal discharge is reported.
论述了实施通电加热的工艺设计的重要参数及系统设计的总体要求；
Some critical parameters were studied and discussed for the requirements of the technology and system design of ohmic heating ; The applied scope, cir…
通过导电加热的温度补偿，导电加热切削能有效抑制金属切削表面的积屑瘤和鳞刺。
The electric hot machining (EHM) can effectively restrain built up edges and scales of the metal cutting surface by temperature compensation.
因此，亦称风帘机、空气幕、空气风幕机、风闸、空气门，电热风幕就是采用电加热的风幕机。
Therefore, also known as the wind curtain machine, air curtain, air curtain machine, air brake, air door, air curtain machine electric air curtain is the use of electric heating.
通电加热技术是食品工程中的一门新兴技术，食品物料的电导率是影响通电加热的主要参数之一。
Ohmic heating is a new technology in food engineering. Electrical conductivity is one of the electrical properties of food.
但是一旦安装了电加热装置，特别是采用了承压式运行，不锈钢内胆产品存在很大的局限性。
But once the installation of the electric heating device, especially the bearing type operation, stainless steel products limited.
不锈钢太阳能在“敞开”、不加电加热状态下，使用效果较好，产品寿命也较长，这是太阳能产品能够快速普及的优势。
Stainless steel solar energy in the "open", no electricity heating state, the use of good results, product life is longer, which is the rapid popularization of solar energy products advantages.
采用导电加热切削技术切削淬硬钢的特点在于：可以采用普通机床、硬质合金刀具对淬硬钢进行硬车削加工。
The feature of machining harden steel by means of EHM are: it can utilize the carbide tool to machine the harden steel in engine lathe.
包括采用陶瓷电加热器加热的局部热处理和采用热处理炉处理的整体热处理；条件适合的情况下优先采用整体热处理。
Partial heat treatment in adoption of electric ceramic heater & overall heat treatment in heating treatment oven are included; and, overall heat treatment is recommended if the conditions permit.
电加热器、螺纹元件、机筒、芯轴系列产品的生产，居于国内同行业的领先水平。
Electric heater, screw elements, barrel, Mandrel series of production, living in the same industry-leading level of domestic.
贯流电热风幕机是在贯流风幕机的进风口或出风口处加上电加热器，利用贯流风机运转带出的热气流形成的热风幕。
The utility model relates to a cross flow electric hot air curtain machine, which is an electric heater which is connected with an air inlet or an air outlet of a cross flow air curtain machine.
本文还介绍了该算法在多变量电加热系统中的应用。
One of the applications of Such an adaptive algorithm to a multivariable electric-heated system is also described.
采用电加热法加热时，需注意热电偶及加热圈的安装要尽可能靠近坡口，但不得妨碍焊工接近接头。
When an electric heating method is used for heating, thermal couple and heating coil should be installed closest to the bevel while should not hinder the access of welder to the joint.
采用电加热或火焰直接加热，但在车间制造过程中，为了确保温度均衡的前提下，尽量采用电加热。
Electric heating or direct flame heating can be applied. However, during workshop manufacturing, electric heating should be applied as possible under the Pre-requisite of temperature balance.
锅炉、吸风烫台、电加热熨斗（另配）为一体，可自动地连续产生高质量的饱和蒸汽，操作方便，效率极高。
This model is with in-build steam generator(Electric-steam iron is additional), which can automatically produce high-quality saturated steam to make the operation more efficient and convenient.
针对电磁铸轧系统中的电加热炉，采用了EPEC3g系列微处理器建立了电加热炉恒流量控制系统。
Constructed a control system of the electric stove with constant flow based on EPEC 3g microprocessor for the electric stove in the electromagnetic roll-casting system.
本文还对热泵干燥、电加热干燥、蒸汽加热干燥的一次能源消耗和能源费用进行了比较和经济评价。
The primary energy consumption and the energy cost of the heat pump dryer are compared with those of electrical heating dryer and steam-heating dryer and their economic evaluations are carried out.
本文系统地介绍了全自动电加热炊具的机械、电控系统的硬软件的设计开发过程。
The paper introduces systematically the designing and developing process of hard and soft wares of electricity-heat pot's mechanical and electrical control system.
反应釜的加热方式可选用电加热、蒸汽加热、循环导热油加热等。
The heating method of the reaction kettle can be used for heating, steam heating, circulating heat conducing oil heating and so on.
科瑞电器厂是集设计、生产、研发各类电加热器、螺纹元件、机筒、芯轴的专业厂家。
Corey Electrical Appliance factory is a set of design, production, research and development all kinds of electric heaters, screw elements, barrel, Mandrel specialized factory.
铝管加热器是将发热置于铝管内的一种电加热元件。
The aluminium tube heater is an electric heating component through putting the heating wire into the aluminium tube.
电加热器的热输出应该由要求的最大产品提取率来确定，不能有过剩能力。
The electric heater should have a heat output rated for the maximum product withdrawal rate requirements, without excessive over-capacity.
介绍了半固态金属加工中使用的电加热炉的温度采集与控制系统。
The temperature collect and control system for electric heating furnace in Semi-Solid Metal Processing is introduced.
线状（带状）加热器是将发热线（带）端部接上导线，并对连接外进行密封而制成的电加热器。
The kind of product joins lead onto the end of the heating wires and airproof the joint.
详述了分子筛初次启动和正常运行时的注意事项，并对电加热和蒸汽加热再生的安全操作做了简单说明。
The notices are described in details when Molecular sieve first startup & operating naturally, in addition, the secure operation of electric heater & steam heater are explained in brief.
介绍了氢气保护钼丝电加热炉的制作技术和日常操作使用及维护方法。
The fabrication, operating and maintaining of the hydrogen shielded electric heating stove with molybdenum wire are introduced.
本文利用组合式电热辐射板实验研究了电加热地板采暖辐射板内的传热特性。
In this paper, the heat-transfer characteristics of the heating panel of an electric heating radiation floor system were investigated.
本文利用组合式电热辐射板实验研究了电加热地板采暖辐射板内的传热特性。
In this paper, the heat-transfer characteristics of the heating panel of an electric heating radiation floor system were investigated.
应用推荐