这些高质量、高报酬的工作中的很大一部分将发生在当今那些生产煤炭和石油的国家里。
Many of these high quality, good-paying jobs will be in today's coal and oil producing states.
将它们添加到清单反映了生产厂家在质量方面取得的相当大的改进，以及对成为资格预审规划一部分的日益增加的兴趣。
Their addition to the list reflects considerable quality improvement made by manufacturers, and an increasing interest in being part of the prequalification programme.
l如果在产品运输和储存过程中，对该防腐剂和设备的兼容性有怀疑，可以咨询防腐剂生产厂商，供应链质量部。
If there is any doubt about product compatibility with equipment during shipment and storage.
子公司称，很多中小部件都可以在几小时或几天内从计算机设计直接转变为符合生产质量需要的金属零部件，而使用传统工序需要好几天或几周时间。
It says many small and medium-sized components can be turned from computer designs into production-quality metal parts in hours or days, against days or weeks using traditional processes.
重型压力计的外壳和功能性零部件均按照特殊质量参数制造，以专用生产流程进行安装，并经过了数次检查。
The housing and functional parts of the heavy-duty manometer are manufactured with the aid of specific quality parameters, mounted in a special production process and checked many times.
我相信每个人都同意热处理是生产高质量产品的一部分。
I believe we can all agree that heat treating should strive to produce the best product quality possible.
协助生产经理、质量保证部经理确保所有部门符合工艺流程制造标准。
To co-ordinate with the Production Manager and Quality Manager to ensure all department are in conformance with manufacturing standards.
不同公司生产不同的部件(如硬盘、中央处理器和磁盘驱动器等)，不同厂商所生产的同一部件的质量也不是参差不齐。
Different companies produce different components (e.g. hard drives, central processing unit (CPUs), and disk drives), and the quality of a component may vary across manufacturers.
在试生产过程中，质量部应按测量系统分析计划进行测量系统的评价和分析。
In the course of trial production, quality department should, based on measuring system analysis plan, conduct assessment and analysis to the system.
每一个工程技术更改必须由技术部以正式的文件及时通知质量，生产，材料部门。
Engineering Dept. must inform each engineering change with formal documents to Quality Dept. Production Dept. and Material Dept. timely.
装配智能IC卡公用电话机，其综合质量水平是零部件、外购外协件、原材料以及生产、装配、设计整个过程的质量综合体现。
In the assembling of IC card intelligence telephone, the All quality Level accords to the quality of parts, components, material and the course of producing, assembling and designing.
玻纤增强汽车门内饰板采用结构反应模塑（SRIM）工艺生产，在保证强度的前提下有效减小了零部件的质量。
SRIM process was adopted to produce automotive door interior trimming panel, where mass of parts can be reduced without strength decrease.
使产品从原材料进货、零部件入库到生产的各个环节中层层严格把关，以确保产品的质量。
Make products from the raw material stock, spare parts inventory in various links to the production strictly layer upon layer, in order to ensure the quality of the products.
介绍了一种现代汽车制造厂对零部件供应商进行质量控制的先进管理模式，它包括对零部件的设计、生产、包装、交付等环节进行全面控制。
An advanced quality management mode for automobile component part supply is introduced, which includes the control over all process of design, production, packing, delivery, etc.
现场是否有：组织机构图、岗位说明书（质量受权人、质量保证部经理、质量控制部经理和生产部经理）、成品批放行程序。
Documents to be provided: organization diagram, job descriptions for QP, QA, QC and production managers, batch release procedure for finished products.
自动穿经的经纱的特点是零缺陷和质量上乘，与手动穿经相比，当要求在一小部分时间内生产，它们也是可行的。
Automatically drawn-in warps are characterized by zero defect and high quality, and they are available as required for production in a fraction of the time compared with manual drawing-in.
第三部分相关理论综述。阐述了准时化生产方式、质量管理体系和5s现场管理方法的理论。
New management methods This part describes the definition and theory of JIT, Quality Control System's establishment, 5s workshop management methods.
质量部负责生产件批准资料向顾客提交。
The Quality Department is responsible for submitting the Production part Approval Data to the customer.
在帘子布的生产过程中，质量检测与控制是非常重要的，而疵点检测是质量检测与控制中最重要的一部分。
The quality inspection and control is very important in the production process of the cord fabric. But the defects detection is the most important part of it.
最后介绍的是一部高质量的零件热风干燥机，专门针对生产量较低的设备。
Finally, a top quality hot air parts dryer, designed with the small production facility in mind.
生产部经理：引进质量控制，使得工作时数减少了20%，而生产力则进步了25%。
Production manager: Initiated quality control resulting in a reduction in working hours by 20% while increasing productivity by 25%.
生产部经理：引入质量控制，使得工作时数减少了20%，而生产力则提高了25%。
Production manager: Initiated quality control resulting in a reduction in working hours by 20% while increasing productivity by 25%.
根据客车侧骨架立柱的结构特点，立柱端部为圆弧结构，采用冲模成型，从而提高骨架立柱的质量及生产效率。
According to the structure characters of the bus frame pillars, the end arc is made by die.
生产部经理：引入质量控制，使工作时数减少了20%，而生产力则提高了25%。
Production manager: Initiated quality control resulting in a reduction in working hours by 20% while increasing productivity by 25%.
公司下设质量保证部、工程技术部、生产制造部、总经办、财务部。
The Company set up Quality Control Department, Technology Department, Produce and Manufacture Department, General Manager Office and Financial Department.
公司下设质量保证部、工程技术部、生产制造部、总经办、财务部。
The Company set up Quality Control Department, Technology Department, Produce and Manufacture Department, General Manager Office and Financial Department.
应用推荐