详细分析了试制工艺及产品性能并对生产工艺的优化改进进行了探讨。
The technology and the properties were analyzed in detail, and the technical improvement was also studied.
这些新的生产方法都是对生产工艺的优化，从而提高企业的生产运作效率。
These new methods help to optimize the production process, and promote the production efficiency of enterprise.
对指导工厂生产扩产、生产工艺的优化和新型环流反应器的开发等具有积极的意义。
They are significant for designing and scale-up of the air-lift reactor, and for researching and development the new reactors.
本文主要研究了菌根制剂生产工艺的优化及其复合胶囊菌剂对油松幼苗的生长促进作用。
This paper mainly studied Optimization of Production Process for Complex Ectomycorrhizal Fungal and Bacterial Fertilizers and its Effects on Chinese pine seedings.
采用硫氰酸钠为溶剂，湿法二步法工艺生产扁平腈纶，探讨了喷丝板的选型和生产工艺的优化。
Using NaSCN as solvent, flat acrylic fiber was produced by two-step wet spinning process. The selection of spinneret shape and the optimization of process conditions were discussed.
由于该模型藕合了钢种连续冷却转变曲线，可预测相变热及相变区间，因而为新钢种开发及现有生产工艺的优化提供了依据。
As steels CCT figures have been coupled in the model, it can predict the heat and range of phase transformation, this function can provide direct help for ne...
在大量实验的基础上对低聚果糖的生产工艺进行优化。
Based on lots of experiments, the production process of FOS was optimized.
通过化学成分和生产工艺优化，使钢材的各项性能达到标准要求。
The steel's properties come up the standards by optimizing chemical composition and production process.
在此基础上建立了晶粒尺寸与工艺参数间关系的BP网络模型，进而以晶粒尺寸最小为目标对实际生产工艺进行了优化。
On this basis, a BP network model determining the relation between grain size and technological parameters is established, and the actual production technology has been optimized.
王书林，沈万涛，次磷酸钠生产工艺及反应器的优化对生产次磷酸钠工艺及主要设备进行了评述，对相应的技术开发提出了新的见解和建议。
In this paper, the process of sodium hypophosphite production and equipment is summarized, new views and suggestions are put forward according to corresponding technological exploitation.
介绍了包钢CSP厂通过成分调整和工艺优化，研究出适合冷轧生产的热轧低碳钢带生产工艺。
Through adjusting the composition and optimizing process, low carbon steel strip for cold rolling has been developed successfully in CSP line.
以感官评分和含油率为指标，对面窝的生产工艺参数进行了优化。
The processing technology optimization based on sensory evaluation and oil content of fried cake was studied.
目的：对洛伐他汀片的生产工艺进行改进和优化。
OBJECTIVE: To optimize the formulation and technology of Lovastatin tablets.
并结合新技术理念，对我厂的卷烟纸生产工艺作了认真的优化研究。
Combining new technology, the technology of the new rice paper line was designed and optimized.
介绍转炉炼钢厂优化3号方坯连铸机的生产工艺，使生产稳定性提高，铸坯质量得到改善。
The process optimization for No. 3 Billet Caster at Converter Plant which improves the production stability and strand quality has been introduced.
阐述了济钢焦化厂通过优化和改进生产工艺，降低能源消耗所采取的具体措施和取得的经济效益。
This paper introduces the particular measures applied to reduce energy consumption for increasing economic profits by the process optimization and improvement.
文摘：济钢开发研制的润磨机在济钢球团厂生产中应用后，优化了生产工艺。
Abstract: As the humidifying grinder developed by Jigang itself applied in pelletizing plant, the process was optimized.
介绍了镁炭质整体出钢口的损毁机理及生产工艺过程，对影响整体出钢口质量的工艺因素进行了分析和优化。
The wear mechanism and production process of monolithic magnesia-carbon tapping hole were presented, and the process factors affecting the quality of the tapping hole were analyzed and optimized.
它们防止管道的水垢形成和侵蚀，从而增加了系统的效能，优化了生产工艺，节约了能量。
It prevents the scale formation and corrosion inside pipes so as to improve efficiency of the system, optimizes production and save energy.
目的：为了提高银杏叶水提液的澄清度和药品质量，优化生产工艺。
AIM: in order to improve the clarity and quality of Ginkgo leaf water-extraction solution, and optimize the production process.
所有这些程序的编制完成为进行轧制过程的数值模拟、晶粒尺寸预报及生产工艺优化提供了现实计算工具。
All of these computer programs provides a real computing mean of simulating rolling process, forecasting grain size of rolled products, optimizing technological parameters.
宝钢持续优化改进、研发转炉控制模型，使控制模型适合不断变化了的炼钢生产工艺。
Control models on LD convener have been optimized and developed, to make control model suitable to new steel - making technics.
方法：用正交试验法对西咪替丁片的生产工艺进行优化考察。
Method: the preparative technology of cimetidine tablets was optimalized by the method of Orthogonal experiment.
本文介绍了窑具的生产工艺过程，并利用正交实验对堇青石质窑具的配方进行了优化，得出了比较合理的配方。
Here the production technological process of kiln furniture is interviewed, and the composition of the cordierite kiln furniture is optimized by orthogonal test, finally draw a satisfied conclusion.
烧结试验是指导烧结设计、生产工艺条件优化的基础，也是烧结研究的重要组成部分。
The sintering experiment is not only base for guiding design and optimization of technics condition but. al- so the important constitute part of sintering investigation.
应根据薄板坯连铸连轧生产钢种的不同要求，对转炉—薄板连铸连轧生产工艺流程进行合理的优化，提高产品质量，扩大生产品种。
The production techniques on the Converter-CSP process should be optimized according to the different requirements for the various steel grades, therefore, to improve the p.
烧结试验是指导烧结厂设计和生产工艺条件优化的基础，也是烧结研究的重要组成部分。
The sintering experiment is not only the base for guiding design and optimization of producing technique conditions but also is the important part of sintering investigation.
目的提高包衣片的稳定性，同时优化选择包衣的生产工艺条件。
OBJECTIVE To improve the stability of the film coated tablets and optimize the condition of the film coating process.
利用均匀实验设计方法，探讨了腐竹生产过程中多种因素对腐竹品质的影响并优化了生产工艺条件。
The influences of some factors on the yuba quality were studied and the processing conditions were optimized by uniform design.
利用均匀实验设计方法，探讨了腐竹生产过程中多种因素对腐竹品质的影响并优化了生产工艺条件。
The influences of some factors on the yuba quality were studied and the processing conditions were optimized by uniform design.
应用推荐