结果表明机械球磨方法能有效地使木薯淀粉颗粒微细化。
The results showed that tapioca starch granules can be effectively micronized by ball milling.
结论用行星式球磨方法，在亲水高分子的保护下，选用高能量球磨条件，可得到稳定的氯硝柳胺纳米剂。
Conclusion Under the protection of hydrophilic polymers, stable nanoparticle solution of niclosamide can be prepared by the method of planet ball-milling choosing high-energy ball-milling condition.
结果表明在行星球磨方法下，球磨15到20小时材料晶粒达到最小，在一定温度下退火之后材料晶粒长大。
The grain size differs obviously with the time of ball milling and it reaches the smallest value when been ball milled for 15~20 hours. The grain size also grows when annealed at certain temperature.
通过微观结构和性能方面的比较，发现用机械球磨方法制备的纳米晶与原子沉积法获得的材料具有相似的结构和性质。
By comparisons in structure and physical properties, nanocrystalline materials prepared by mechanical grinding are similar to that obtained by atomic condensation.
实验室和工业应用试验结果表明，变转速球磨方法不仅能较大幅度地提高球磨效率，而且能对粉料加工质量产生明显的影响。
Tests in laboratory and industry have shown that ball_milling with variable rotational speed can raise the efficiency of ball_milling by a big margin and improve the processing quality of the powders.
介绍了离心铸造磨球的工艺，以及转速、内浇口断面积计算方法和影响工艺过程的因素。
The technology of grinding ball by centrifugal casting, the rotational speed, the method for calculation of ingate area and factors influencing technological process were introduced.
采用复合变质方法，开发工艺简单、成本低的钨渣合金铸铁磨球是一种有效的途径，其材质性能可以满足使用的要求。
Manufacturing of alloy cast iron grinding ball by means of composite modification of tungsten slag is a feasible way due to its simple process, low cost and good product quality.
采用高能球磨法混料和低温快速热挤压工艺相结合，是实现增强体颗粒均匀分布的最有效方法。
The results indicate that high energy ball milling together with low temperature quick hot extrusion is the most effective method for obtaining homogenous distribution of reinforcers.
介绍了利用图像处理技术在四球机试验中进行磨痕测量的方法和系统组成。
The paper introduces the method of wear away measurement in four_balls machine testing make use of image processing, and system formation.
本文将热喷涂法与机械球磨法相结合，提出一种新的超细铜锌粉末的制备方法。
The methods of thermal spray and mechanical ball milling were combined in this paper and a new method of preparation of ultrafine Cu-Zn powder was brought forward.
本文将热喷涂法与机械球磨法相结合，提出一种新的超细铜锌粉末的制备方法。
The methods of thermal spray and mechanical ball milling are combined in this paper and a new method of preparation of Cu-Zn ultrafine powders is brought forward.
本文介绍了通过选择卵石球适宜的装填量及合理的级配，提高磨机产量的方法。
In this article how to determine the proper ball charge and grading of the pebbles is introduced to increase the mill output.
但用高能球磨直接氮化合成氮化铝的方法尚未报道。
However, there has not article about direct synthesis of aluminum nitride in high-energy ball mill.
该方法已在螺旋刃球头立铣刀的实际刃磨中得到应用，证明了其正确性和可行性。
This method has been applied in the sharpening of helical ball nosed end- mills, which shows that the method is correct and feasible.
朱砂炮制方法不同。可溶性汞盐的含量也不同，球磨法高，水飞法低。
And it also shows that the ways of processing cinnabar are different, thus, the content of the dissoluble mercury salt are different.
应用精确化装补球方法，开展了提高狮子山铜矿磨机生产能力的研究。
Applying a method of accurate loading and addition of milling balls, research to raise the mill capacity of Shizishan Copper Mine was carried out.
用实验的方法进一步验证了高铬铸铁磨球具有良好的耐磨性能。
We prove that high chromium casting iron ball's relatively good wear-resisting performance further by way of experiment.
阐述了造纸磨浆盘磨机易损零件—磨盘的磨损机理，性能要求，耐磨球铁材质的选用；介绍了生产过程和产品质量控制的方法。
Elaborates millstones wearing mechanism, performance requirement and material selection for vulnerable of pulp millstones and introduces production process and quality control.
新的装补球方法提高了磨机生产率及选别指标，并降低了球耗和电耗。
The productivity of mill, separating indexes of dressing process are increased, and the consumptions of materials and power are decreased by adoption of the accurate method for ball load and addition.
表面活性剂辅助的高能球磨法制备纳米铜铟硒太阳能电池材料，涉及一种制备纳米铜铟硒(CIS)太阳能电池材料的新方法。
The present invention is surfactant aided high energy ball milling process for preparing nanometer Cu-In-Se (CIS) material for solar cell.
公开了一种方法，其中在球磨中与磨料和冷粘着粘结剂一起处理粗二氧化硅、氧化钙和氧化镁源。
A process is disclosed in which coarse silica, calcium oxides and magnesium oxides are treated in a ball mill together with grinding AIDS and cold-strength binders.
采用球磨和真空热压烧结方法成功制备氧化石墨烯/铜复合材料。
Abstract :Graphene oxide/copper (GO/Cu) composites were successfully synthesized through the ball milling and vacuum hot press sintering process.
本发明钎料的制备方法如下：将活性钎料原材料加入到行星式球磨机中进行球磨。
The preparation method for the solder in the invention comprises the steps as follows: raw material of the active solder is added to a planetary ball mill for ball milling.
高能球磨法是制备超细粉体的一种重要方法，但对不同的材料，制备粉体所需的工艺区别较大。
Influence of process control agent in preparation of SiC/Al composite powder by high energy ball milling;
高能球磨法是制备超细粉体的一种重要方法，但对不同的材料，制备粉体所需的工艺区别较大。
Influence of process control agent in preparation of SiC/Al composite powder by high energy ball milling;
应用推荐